Download D-Link DWS-3000 User's Manual

24
Outbound Telnet
This section describes the Outbound Telnet feature.
Overview
Outbound Telnet:
•
•
•
•
Feature establishes an outbound telnet connection between a device and a remote host.
When a telnet connection is initiated, each side of the connection is assumed to originate
and terminate at a “Network Virtual Terminal” (NVT).
Server and user hosts do not maintain information about the characteristics of each other’s
terminals and terminal handling conventions.
Must use a valid IP address.
CLI Examples
The following are examples of the commands used in the Outbound Telnet feature.
Overview
155