Download Canon VB-C10R User's Manual

Detail Settings
View Restriction Settings
You can set the visible range by restricting the camera pan, tilt and zoom ratio (field of view angle)
settings.
Controllable range and Video Capture Range
Field of view at the
maximum wide-angle setting
0°
+
Extent of pan control
Setup Procedures
Extent of tilt control
Maximum vertical extent
of the video capture range
-
+
Maximum horizontal extent of the video capture range -
The view restriction specifies the visible range. The visible range is larger than the area in which
pan and tilt can be controlled.
Note
Do not attempt to manually change the camera head angle.
If the camera head is accidentally moved by hand or other objects
touching it, be sure to restart the VB-C10/VB-C10R by turning the
power supply OFF then ON again. The deviation from the position
that the VB-C10/VB-C10R memorizes will be corrected and the
operation will be back in order.
Range of Camera Head Movement
The figures below show the range of camera head movement from a horizontal position.
+90°
+100°
-100°
+10°
+170°
-30°
-170°
VB-C10
-90° VB-C10R
3-13