Download Cable Electronics HM41DA User's Manual
Transcript
CE labs can support many areas of your audio and video distribution needs. See our full product line at www.celabs.net. Or, call our sales department at 1 800 767 6189. WARRANTY Cable Electronics, Inc. warrants this product to be free from defects in material and workmanship, under normal use and service, for a period of one year from the purchase by the original purchaser. If this product is defective or malfunctions, Cable Electronics will replace or repair this unit (at their option) within a reasonable time. No expressed or implied warranty is made for any defects caused by immersion or exposure to liquids, abuse, neglect, improper operation of unit, excess wear and tear and defects resulting from unauthorized disassembly and or modification. Cable Electronics, Inc. http://www.celabs.net 3209 Wood Street Garland, Texas 75041 (469)429-9200 Fax (469)429-9205 INSTRUCTION MANUAL We manufacture RF modulators, RF amplifiers, HD distribution amplifiers, and cables of all types. HDMI Distribution Amplifiers PanelLink digital technology. Supports HDTV resolutions 480i, 480P, 720P, 1080i, & 1080P Cascadable for larger display systems. Heavy duty metal housing. Commercial duty rated. Cable Electronics, Inc. Document: HMXXDA_INFO_A.cdr Rev. A 3209 Wood Street Garland, Texas 75041 (469)429-9200 Fax (469)429-9205 HDMI Distribution Amplifiers Cascade Configuration HD SOURCE OUT 1 HM41DA POWER Pin # 1 2 3 4 5 6 7 8 9 10 Signal TMDS Data 2+ TMDS Data 2 Shield TMDS Data 2TMDS Data 1+ TMDS Data 1 Shield TMDS Data 1TMDS Data 0+ TMDS Data 0 Shield TMDS Data 0TMDS Clock+ Pin # 11 12 13 14 15 16 17 18 19 Signal TMDS Clock Shield TMDS Clock CEC Reserved (N.C.) SCL SDA DDC/CEC Ground +5 Power Hot Plug Detect Installation / Operation Instructions 1. Turn off the devices to be connected together. 2. Connect the HDMI cable between the source (DVD, Satellite Receiver, etc.) and the “HDMI In” port of the Distribution Amplifier. 3. Connect the HDMI cables from the outputs of the distribution amplifier to the inputs of the monitors. 4. Power up the Distribution Amplifier and the Monitor connected to HDMI output number one on the amplifier. Leave the other monitors off for now. 5.Turn on power to the source device. The monitor connected to output number one should have picture and sound within about 5 seconds. 6. Turn on power to the remaining monitors. NOTES: 1. All monitors connected to the distribution amplifier should be capable of the same resolution. 2. Always connect the first monitor to output number one on the Distribution Amplifier first. This is necessary for the Electronic ID to be read properly by the source. 3. For best performance, try to use HDMI cables no longer than 3 meters in length. POWER OUT 4 INPUT OUT 3 OUT 2 OUT 1 HM41DA OUT 4 INPUT OUT 3 OUT 2 OUT 1 HDMI IN HDMI IN HDMI IN HDMI IN HDMI IN HD MONITOR 1 HD MONITOR 2 HD MONITOR 3 HD MONITOR 4 HD MONITOR 5 SPECIFICATIONS Unit HDMI Input Connector (A-Type Female) HDMI Output Connector (A-Type Female) Max. Resolution Cable Distance (Device to Monitor) Signal Type Power Adapter (Min.) Housing Weight Dimensions (LxWxH) mm HM21DA 2-Port HM41DA 4-Port HM81DA 8-Port 1 1 1 2 1080P 10 m (Max.) DC 9V 1A Metal 1.3 lbs. 4 1080P 10 m (Max.) Standard HDMI Signal DC 9V 1A Metal 2.2 lbs. 200x75x45 269x104x45 8 1080P 10 m (Max.) AC100~240V Metal 5.6 lbs. 440x185x45