Download Cable Electronics HM41DA User's Manual

HDMI Distribution Amplifiers
Cascade Configuration
HD SOURCE
OUT 1
HM41DA
POWER
Pin #
1
2
3
4
5
6
7
8
9
10
Signal
TMDS Data 2+
TMDS Data 2 Shield
TMDS Data 2TMDS Data 1+
TMDS Data 1 Shield
TMDS Data 1TMDS Data 0+
TMDS Data 0 Shield
TMDS Data 0TMDS Clock+
Pin #
11
12
13
14
15
16
17
18
19
Signal
TMDS Clock Shield
TMDS Clock CEC
Reserved (N.C.)
SCL
SDA
DDC/CEC Ground
+5 Power
Hot Plug Detect
Installation / Operation Instructions
1. Turn off the devices to be connected together.
2. Connect the HDMI cable between the source (DVD, Satellite Receiver, etc.) and the
“HDMI In” port of the Distribution Amplifier.
3. Connect the HDMI cables from the outputs of the distribution amplifier to the inputs
of the monitors.
4. Power up the Distribution Amplifier and the Monitor connected to HDMI output
number one on the amplifier. Leave the other monitors off for now.
5.Turn on power to the source device. The monitor connected to output number one
should have picture and sound within about 5 seconds.
6. Turn on power to the remaining monitors.
NOTES: 1. All monitors connected to the distribution amplifier should be capable of the
same resolution.
2. Always connect the first monitor to output number one on the Distribution
Amplifier first. This is necessary for the Electronic ID to be read properly by
the source.
3. For best performance, try to use HDMI cables no longer than 3 meters in
length.
POWER
OUT 4
INPUT
OUT 3
OUT 2
OUT 1
HM41DA
OUT 4
INPUT
OUT 3
OUT 2
OUT 1
HDMI IN
HDMI IN
HDMI IN
HDMI IN
HDMI IN
HD MONITOR 1
HD MONITOR 2
HD MONITOR 3
HD MONITOR 4
HD MONITOR 5
SPECIFICATIONS
Unit
HDMI Input Connector
(A-Type Female)
HDMI Output Connector
(A-Type Female)
Max. Resolution
Cable Distance (Device to Monitor)
Signal Type
Power Adapter (Min.)
Housing
Weight
Dimensions (LxWxH) mm
HM21DA
2-Port
HM41DA
4-Port
HM81DA
8-Port
1
1
1
2
1080P
10 m (Max.)
DC 9V 1A
Metal
1.3 lbs.
4
1080P
10 m (Max.)
Standard HDMI Signal
DC 9V 1A
Metal
2.2 lbs.
200x75x45
269x104x45
8
1080P
10 m (Max.)
AC100~240V
Metal
5.6 lbs.
440x185x45