Download Billy Goat F601S User's Manual
Transcript
FORCE 6 BLOWER Owner’s Manual Patent #6,253,416 and other patents pending F601S BILLY GOAT FORCE BLOWER Owner's Manual ACCESSORIES FRONT AIR DIRECTOR Simple to attach, allowing air to be directed forward. Part No 441161 PN# 441130 1 Form No F113007B FORCE 6 BLOWER Owner’s Manual ABOUT THIS MANUAL THANK YOU for purchasing a BILLY GOAT ® FORCE Blower. Your new machine has been carefully designed and manufactured to provide years of reliable and productive service. This manual provides complete operating and maintenance instructions that will help to maintain your FORCE Blower in top running order. Read this manual carefully before assembling, operating, or servicing your equipment. CONTENTS SERIAL PLATE DATA AND SPECIFICATIONS 3 4-5 GENERAL SAFETY SOUND AND VIBRATION 6 INSTRUCTION LABELS 7 PACKING CHECKLIST 8 ASSEMBLY 9 OPERATION 10-11 MAINTENANCE 12 TROUBLESHOOTING AND WARRANTY PROCEDURE 13 ILLUSTRATED PARTS LIST 14 PARTS LIST 15 MAINTENANCE RECORD 16 Part No 441161 2 Form No F113007B FORCE 6 BLOWER Owner’s Manual SERIAL PLATE DATA Record the model number, serial number, date of purchase, and where purchased. Purchase Date: Purchased From: Specifications F601S Engine: HP 6.0 HP (4.7kW) Engine: Model EX17D50012 Engine: Type SUBARU Engine: Fuel Capacity 3.8 qt.(3.6 L) Engine: Oil Capacity 0.63 qt.(0.60 L) Total Unit Weight: 76# (34.5 kg) Overall Length: 43.5"(1.1m) Overall Width 22” (0.56m) Overall Height 45" (1.14m) In compliance with 2000/14/EEC standards 105dB(a) @3600 rpm Sound at Operator’s ears 89dB(a) @ 3600 rpm 2 Vibration at operator position Part No 441161 1.02 g (10.1 m/s ) 3 Form No F113007B FORCE 6 BLOWER Owner’s Manual GENERAL SAFETY INSTRUCTIONS and SYMBOLS The safety symbols shown below are used throughout this manual. You should become familiar with them before assembling, operating, or servicing this equipment. This symbol indicates important information that will prevent injury to yourself or others. This symbol indicates ear protection is recommended when operating this equipment. This symbol indicates eye protection is recommended when operating this equipment. This symbol indicates gloves should be worn when servicing this equipment. This symbol indicates that this manual and the engine manufacturer’s manual should be read carefully before assembling, operation, or servicing this equipment. This symbol indicates important information that will prevent damage to your BILLY GOAT FORCE Blower. ® This symbol indicates the engine oil level should be checked before operating this equipment. Read and make sure you thoroughly understand the following safety precautions before assembling, operating or servicing this equipment: READ this manual and the engine manufacturer’s manual carefully before assembling, operating, or servicing this equipment. EAR PROTECTION is recommended when operating this equipment. EYE PROTECTION is recommended when operating this equipment. BREATHING PROTECTION is recommended when operating this equipment. EXHAUST from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. DO NOT operate this equipment on any unimproved forested, brushy, or grass covered land unless a spark arrester is installed on the muffler as required by Section 4442 of the California Public Resources Code. The arrester must be maintained in good working order. Other states may have similar laws. Federal laws apply on federal lands. DO NOT run engine in an enclosed area. Exhaust gases contain carbon monoxide, an odorless and possibly fatal poison. Part No 441161 4 Form No F113007B FORCE 6 BLOWER Owner’s Manual DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is recommended. DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least two minutes before refueling. DO NOT store gasoline near an open flame. DO NOT remove gas cap while engine is running. DO NOT start or operate engine if strong odor of gasoline is present. DO NOT start or operate engine if gasoline is spilled. Move equipment away from spill until gasoline has completely evaporated. DO NOT smoke while filling the fuel tank. DO NOT check for spark with spark plug or spark plug wire removed. Use an approved spark tester. DO NOT operate engine without a muffler. Inspect muffler periodically and replace if necessary. If equipped with muffler deflector, inspect deflector periodically and replace if necessary. DO NOT operate engine with grass, leaves or other combustible material near the muffler. DO NOT touch muffler, cylinder, or cooling fins when hot. Contact with hot surfaces may cause severe burns. DO NOT leave equipment unattended while in operation. DO NOT park equipment on a steep grade or slope. DO NOT operate equipment with bystanders in or near the work area. DO NOT allow children to operate this equipment. DO NOT operate equipment with guards removed. DO NOT operate equipment near hot or burning debris or any toxic or explosive materials. DO NOT operate equipment on slopes greater than specified in Specifications section of this manual. ALWAYS remove spark plug wire when servicing equipment to prevent accidental starting. ALWAYS check fuel lines and fittings frequently for cracks or leaks. Replace if necessary. ALWAYS keep hands and feet away from moving or rotating parts. ALWAYS store fuel in approved safety containers. WARNING: Important Do not run this machine without director cone attached or with improper air director cone. DO NOT run this machine with a cracked or damaged impeller under any circumstances. Part No 441161 5 Form No F113007B FORCE 6 BLOWER Owner’s Manual SOUND SOUND LEVEL 89 Db(a) at Operators Position Sound tests were conducted in accordance with 2000/14/EC, as well as ISO 11094, and were performed on 8-32007 under the conditions listed below. Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit for the sound power level for your model. General Conditions: Temperature: Wind Speed: Wind Direction: Humidity: Barometric Pressure: Sunny 87.8oF (31.1oC) 1.8 mph (2.8kph) East South east 61.5% 30.1Hg (101.98kpa) VIBRATION DATA VIBRATION LEVEL 1.02g (10.1m/s2) Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using calibrated vibration test equipment. Tests were performed on 9-20-07 under the conditions listed below. General Conditions: Temperature: Wind Speed: Wind Direction: Humidity: Barometric Pressure: Sunny 86.5oF (30.3oC) 8 mph (13 kph) South Southwest 49.8% 30.1Hg (101.94kpa) INTENDED USE This machine is designed for cleaning outdoor surfaces, where the debris can be effectively blown into a consolidated area for convenient pickup and removal. DO NOT OPERATE IF EXCESSIVE VIBRATION OCCURS. If excessive vibration occurs, shut engine off immediately and check for damaged or worn impeller, loose impeller bolt, loose impeller key, loose engine or debris stuck in fan or housing. To remove debris from impeller see the trouble shooting section on page 13. Note: See parts list for proper impeller bolt torque specifications. Part No 441161 6 Form No F113007B FORCE 6 BLOWER Owner’s Manual INSTRUCTION LABELS The labels shown below were installed on your BILLY GOAT ® FORCE Blower. If any labels are damaged or missing, replace them before operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering replacement labels. The correct position for each label may be determined by referring to the Figure and Item numbers shown. LABEL READ OWNERS MANUAL ITEM #35 P/N890301 LABEL EAR EYE BREATHING ITEM#36 P/N890254 DANGER FLYING DEBRIS ITEM # 37 P/N 810736 LABEL EXPLOSIVE FUEL ITEM # 34 P/N 400268 ENGINE LABELS SUBARU Part No 441161 7 Form No F113007B FORCE 6 BLOWER Owner’s Manual PACKING CHECKLIST These items should be included in your carton. If any of these parts are missing, contact your dealer. Your BILLY GOAT ® FORCE Blower was shipped in one carton, completely assembled except for the Upper Handle Assembly and Front Diverter. Mounting hardware for the Upper Handle Assembly can be found on the lower handle. READ all safety instructions before assembling unit. TAKE CAUTION when removing the unit from the box the Handle Assembly is attached to the unit by cables. PUT OIL IN ENGINE BEFORE STARTING PARTS BAG & LITERATURE ASSY Warranty card P/N- 400972, Owner’s Manual P/N-441161, Declaration of Conformity P/N-440022 Boxing Parts Checklist Handle Upper Assembly Item #24 P/N-441157 Parts Bag & Literature Assy P/N-441160 Subaru 6 Part No 441161 8 Form No F113007B FORCE 6 BLOWER Owner’s Manual ASSEMBLY 1.Follow the steps in figures A and B, then securely tighten all hardware shown. 2.Connect spark plug wire. Figure A Figure B The hardware for attaching the upper handle to the lower can be found on the lower handle. Install upper handle (item 24), to preassembled lower handles (item 25 & 26) by sliding the upper over and down the inside of the lower handle. Using bolt (item #12), washers (item #10) & lock nut (item #11) to install upper handle to lower handle. Finish installing the other side of the upper handle assembly using screw and lock nut provided. The Aimand-Shoot TM is not attached, you will need to unroll the cable and attach the ball end to the lever and seat the cable end into the hole on the saddle clamp, with the cable running through the slot. To keep the cable from being damaged use three ty-wraps (item 61) to secure it to the handle as shown making sure that the cable is not rubbing against the tire. Attach the front tire using the hardware located on the front wheel bracket. Use a block to raise the front end of the unit off the ground. Insert the wheel spacer (item 17) into the wheel and place in between the bracket. Finally insert the bolt (item 20) through the bracket, wheel, and spacer and secure with the nut (item 27) Two ½” open ended wrenches Part No 441161 Two 9/16” Wrenches 9 Form No F113007B FORCE 6 BLOWER Owner’s Manual OPERATION Like all mechanical tools, reasonable care must be used when operating machine. Inspect machine work area and machine before operating. Make sure that all operators of this equipment are trained in general machine use and safety. PUT OIL IN ENGINE BEFORE STARTING STARTING ENGINE: See engine manufacturer’s instructions for type and amount of oil and gasoline used. Engine must be level when checking and filling oil and gasoline. FUEL VALVE: Move fuel valve to "ON" position (when provided on engine). STOP SWITCH: Located on the engine. "ON" position. CHOKE: Operated with choke lever on engine. THROTTLE: Controlled by throttle lever on the handle. Move remote throttle control to fast position. Pull starting rope to start engine. ENGINE SPEED: Under normal conditions, operate at minimum throttle to accomplish your current cleaning task. IF YOUR UNIT FAILS TO START: See Troubleshooting on page 13. HANDLING & TRANSPORTING: Using two people to lift machine is recommended. Lift holding the handle and handle brace. Secure in place during transportation. See series specifications on page 3 for unit weight. Do not use the front grill as an anchor point when securing the unit for transport. Never lift the machine while the engine is running. BLOWING OPERATION Your Billy Goat Force blower is equipped with an air director cone and the patented Aim-N-Shoot TM control lever to allow the operator to direct the air stream up or down as required to assist in moving debris. This feature is extremely useful when debris has piled up to the point that it cannot be blown any farther. The air stream can be directed upward to blow the top of the debris pile over and allow the operator to continue moving more debris farther. Part No 441161 10 Form No F113007B FORCE 6 BLOWER Owner’s Manual ADJUSTING AIR DIRECTOR To adjust air direction, squeeze Aim-N-ShootTM control lever. When you want to blow debris at the same angle for an extended period, choose a suitable position and use the finger controlled push button lock to lock the cone in position. For operations that do not require the use of the Aim-N-ShootTM feature the manual adjustment knob, pictured below, can be used to permanently lock the cone into position. NOTE: be sure to release the knob when returning to using the AimN-ShootTM. DO NOT position director cone to where it will blow debris towards people, vehicles or other objects in vicinity. Flying debris may damage, harm, or cause injury to people or objects in air flow range. Manual Adjustment knob Part No 441161 11 Form No F113007B FORCE 6 BLOWER Owner’s Manual MAINTENANCE PERIODIC MAINTENANCE Periodic maintenance should be performed at the following intervals: Maintenance Operation Inspect for worn or damaged parts. Every Use Daily or Every 5 Hours Every 25 Hours Every 50 Hours Every 100-150 Hours z z Check for excessive vibration z Inspect Impeller for cracks or damage z Inspect for loose parts. IMPELLER REMOVAL 1. Wait for engine to cool and disconnect spark plug. 2. Remove housing front cover, by removing (10) screws, around outside of front cover and the exhaust knob (22) and nut(14). 3. Remove impeller bolt (item #29), lock washer (item #7) and washer (item #28). 4. DO NOT pry on impeller. Pull on center hub area only of impeller. If impeller slides off freely, proceed to (step 6). 5. If the impeller does not loosen, obtain a 3/4-16x3” (Billy Goat part #440192) or longer bolt. Thread bolt by hand into nut until bolt rests against the shaft. Tighten the bolt slowly, which will pull the impeller away from the shaft, remove impeller from shaft. Using a penetrating oil can help loosen a stuck impeller. 6. Reinstall new impeller in reverse order of removal. 7. Tighten impeller bolt. Torque impeller bolt (see parts list on page 15 for proper impeller bolt torque specifications). TIRE AIR PRESSURE Check at regular intervals and maintain. Rear Tires - 20 Psi (137 kPa). STORAGE Never store engine indoors or in enclosed poorly ventilated areas with fuel in tank, where fuel fumes may reach an open flame, spark or pilot light, as on a furnace, water heater, clothes dryer or other gas appliance. If engine is to be unused for 30 days or more, prepare as follows: Remove all gasoline from carburetor and fuel tank to prevent gum deposits from forming on these parts and causing possible malfunction of engine. Drain fuel outdoors, into an approved container, away from open flame. Be sure engine is cool. Do not smoke. Run engine until fuel tank is empty and engine runs out of gasoline. Fuel stabilizer (such as Sta-Bil TM) is an acceptable alternative for minimizing the formation of gum deposits during storage. Add stabilizer to gasoline in storage container or fuel tank. Follow stabilizer manufacturer’s instructions to determine proper mix ratio. Run engine at least 10 minutes after adding stabilizer to allow it to reach carburetor. Part No 441161 12 Form No F113007B FORCE 6 BLOWER Owner’s Manual TROUBLESHOOTING Problem Abnorm al vibration. Engine will not start. Engine is locked, will not pull over. TM lever sticking Aim -N-Shoot Possible Cause · Loose or out of balance im peller. · Debris in im peller. · Loose engine. Solution · Check im peller and replace if required. · Clear debris with com pressed air or a backpack blower (see below pictures).* · Check engine. · Engine not in full choke position. · Out of gasoline or bad, old gasoline. · Check choke position. · Check gasoline. · Spark Plug wire disconnected. · Gas valve off. · Dirty air cleaner. · Connect spark plug wire. · Turn on gas valve. · Clean or replace air cleaner. Contact a qualified service person. · Contact an engine servicing dealer for engine problem s. · Clean debis · Apply silicone based lubricant to pivot points · Loosen m anual adjustm ent knob · Loosen nut · Engine problem . · Debris stuck around cone · Cone adjustm ent knob too tight · Adaptor m ount nut (item 43) too tight *Using compressed air, or a Backpack blower, you can loosen or free debris easily from the impeller and housing, which can cause wear and tear on the machine. You can manually remove debris by taking off the front housing. Note: Always disconnect the sparkplug when servicing. When servicing engine refer to specific manufacturers engine owner's manual. Engine warranty is covered by the specific engine manufacturer. If your engine requires warranty or other repair work contact your local servicing engine dealer. When contacting a dealer for service it is a good idea to have your engine model number available for reference (See table page 3). If you cannot locate a servicing dealer in your area you can contact the manufacturers national service organization. To reach: Subaru America: 800-277-6246 WARRANTY CLAIM PROCEDURE Should a BILLY GOAT ® machine fail due to a defect in material and/or workmanship, the owner should make a warranty claim as follows: • The machine must be taken to the dealer from whom it was purchased or to an authorized Servicing BILLY GOAT Dealer. • The owner must present the remaining half of the Warranty Registration Card, or, if this is not available, the invoice or receipt. • The Warranty Claim will be completed by the authorized BILLY GOAT Dealer and submitted to their respective BILLY GOAT Distributor for their territory Attention: Service Manager. Any parts replaced under warranty must be tagged and retained for 90 days. The model number and serial number of the unit must be stated in the Warranty Claim. • The distributor service manager will sign off on the claim and submit it to BILLY GOAT for consideration. • The Technical Service Department at BILLY GOAT will study the claim and may request parts to be returned for examination. BILLY GOAT will notify their conclusions to the distributor service manager from whom the claim was received. • The decision by the Technical Service Department at BILLY GOAT to approve or reject a Warranty Claim is final and binding. For online product registration go to www.billygoat.com Part No 441161 13 Form No F113007B FORCE 6 BLOWER Owner’s Manual ILLUSTRATED PARTS LIST Part No 441161 14 Form No F113007B FORCE 6 BLOWER Owner’s Manual PARTS LIST F601S ITEM NO. DESCRIPTION PART NUMBER QTY. ENGINE 6 HP HORZ SUBARU 350307 1 2 BASE ENGINE WA 441151-S 1 3 SCREW PLASTITE #8-16 X 3/4" HWH 441155 10 4 PLATE REINFORCE HOUSING 441102 2 5 HOUSING FRONT MOLDED 441101-1-S 1 6 HOUSING BACK MOLDED 441101-2 1 7 WASHER LOCK 5/16 ST MED 8177011 5 8 SCREW CAP 3/8-16X1 1/2 ZP 400164 4 9 ROD HAND STOP 441154 1 10 WASHER 5/16 FLATWASHER Z/P 8171003 10 11 NYLON INSERT LOCKNUT 5/16-18 8160002 6 12 SCREWCAP 5/16-18 X 1.75 ZP 8041031 2 13 SCREW PLASTITE 1/4-10 X 3/4 HWH 840082 4 14 NUT LOCK 5/16-18 LT WT TH ZP 8161041 1 15 RING RETAINING 3/4 850230 2 16 WHEEL 8" X 0.5 441123 1 17 SPACER FRONT AXLE 441162 1 18 WHEEL ASSY 10" 400295 2 19 FRONT WHEEL BRACKET 441122 1 20 SCREWCAP 3/8-16 X 3 3/4 HCS ZP 8041061 1 21 WASHER W/BOLT WA 441156 1 22 KNOB 5/16-18 X 5/8 FLUTED 400339 1 23 WASHER EXTENSION 810652 1 24 HANDLE UPPER 441157-S 1 25 HANDLE LOWER LH 441158 1 26 HANDLE LOWER RH 441159 1 27 NUT LOCK 3/8-16 LT WT THIN ZP 8161042 1 28 WASHER 1.125 OD X 0.344 ID X 10 GA. (25 FT. L 441150 1 29 SCREWCAP 5/16-24 X 1 1/2 GR 8 830135 1 30 DIRECTOR CONE 3.5" 441120-01 1 31 SCREWCAP 5/16-18 X 2 1/2 8041034 4 32 IMPELLER ASSEMBLY 17" 441202-S 1 33 LABEL LOGO ARCH 441153 1 34 LABEL HOT ENGINE 400268 1 35 LABEL READ 890301 1 36 LABEL EAR EYE BREATHING 890254 1 37 LABEL DANGER FLYING DEBRIS 810736 1 38 GRIP 1" ID x 13" 400570 2 39 LABEL LOGO SMALL FRAME 441152 1 40 Key 3/16" SQ x 1 3/4 9201084 1 43 NUT LOCK 1/4"-20 HEX ZP 8160001 1 44 HANDLE DIVERTER FORCE 440119 1 45 PIN LATCH DIVERTER 440118 1 46 SPRING COMPRESSION 0.281 X 0.88 440129 1 47 RING RETAINING .122 DIA 440125 1 48 SADDLE UPPER DIVERTER 440115 1 49 PLATE LOCK DIVERTER 440116 1 50 SCREW PLASTITE #6-19 X 5/8" 440132 2 51 SADDLE LOWER DIVERTER 440114 1 52 SCREW PLASTITE #10-14 X 1" 440126 2 53 PIN PIVOT DIVERTER CONTROL 440123 1 54 RING RETAINING 5/16 430327 1 55 CABLE ASSY 441163 1 56 DIVERTER PIVOT ADAPTOR 440121 1 57 SPRING EXTENSION 0.375 X 3.75 440130 1 58 PIN CLEVIS 1/4 X 3/4 440124 1 59 .051 X 3/4" HITCH PIN CLIP 440193 1 60 ADAPTOR MOUNT WA 440122 1 61 TY-WRAP 900407 3 62 VIBRATION LABEL 440191 1 Part No 441161 15 Form No F113007B FORCE 6 BLOWER Owner’s Manual MAINTENANCE RECORD Date Part No 441161 Service Performed 16 Form No F113007B