Download Avaya DECT Installation and Maintenance Manual

74
Chapter 6 Programming DECT module defaults
4
Press <CTRL j> to return to the System Management menu.
Note: If you change the DECT Administrator password, you must delete the scheduled
time synch task. To delete the task, click the Schedule link on the BRU window to display
the task, then click the Delete button.
After the task is deleted, you need to re-establish the time synch schedule.
For details, refer to “Setting up the module Time Synch” on page 49.
Language Management
If the menu system is not in the language you want, you can change the default language. If the
menu is in the language you want, skip this section.
1
On the System Management menu, type 6 <RETURN> (Parameter Management).
The Parameter Management screen appears. Refer to Figure 30.
Figure 30 Parameter Management menu
MULTI-COMPANY MANAGEMENT
NO
MULTI-SITE MANAGEMENT
NO
OPERATOR GROUP AUDIT ACTIVATED
NO
TYPE OF THE WIRELESS MANAGEMENT DECT
CONSOLE TIME-OUT (SECONDS)
600
CURRENT LANGUAGE
LANGUAGE 2
INSTALL. NAME MC 6501 C ..........................
NUMBER OF RECORDS
- TELEPHONY TYPE
- DATA TYPE
- SERVICE TYPE
- MONITORING TYPE
(current)
356
10
10
24
(requested)
356
10
10
24
2
Use the space bar to select the correct language.
3
Press <CTRL j> to return to the System Management menu.
P0993137 03