Download Avaya Configuring BOOTP Services User's Manual
Transcript
SNMP, BootP, BootP/DHCP Relay, and DHCP Server Concepts 1. The router configured as a DHCP server receives the packet and finds an available IP address to assign to the client. 2. The DHCP server sends an ICMP echo request to the prospective IP address to determine whether the address is available. If the DHCP server receives a response, the address is unavailable because it is being used by another host on the network. The DHCP server selects another IP address to offer and sends another ICMP echo request. 3. If there is no response to the ICMP echo request, the DHCP server sends a DHCPOFFER packet that includes an available IP address to the target DHCP client. 4. If a client does not receive a DHCPOFFER packet within a specified amount of time after broadcasting a DHCPDISCOVER packet, it sends the packet again. The client may rebroadcast the packet a number of times. However, clients operating on systems running Windows 95 broadcast four DHCPDISCOVER packets, each 2 seconds apart. 5. The client may receive DHCPOFFER packets from several potential servers. If you configure the client to wait for multiple responses, it compares configuration parameters in the DHCPOFFER packets to decide which server to target. Requesting and Receiving IP Information Figure 2-10 shows the next stage of the process of acquiring a new IP address from a DHCP server. 308644-15.1 Rev 00 2-25