Download Avaya Business Policy Switch 2000 Software Version 2.0 User's Manual

Implementing QoS Using QoS Wizard and QoS Quick Config
245
Note: Beginning with software version 2.0, you can reference up to 32
VLANs with a layer 2 filter.
4
In the VLAN Tag area, choose either Ignore, Tagged, or Untagged from the
pull-down menu.
5
Complete the EtherType area by either:
— choosing Ignore
— choosing a preconfigured Ethernet type from the pull-down menu
— entering a hex value for the User Defined Ethernet type
6
Complete the 802.1p Priority area by either:
— choosing Ignore
— clicking Priority and choosing one of the 0-7 boxes for the priority value
7
In the DSCP field, choose either Ignore or a value from the pull-down menu.
8
In the IP Protocol field, choose either Ignore or a protocol from the pull-down
menu.
9
Complete the Destination IP Layer4 Port Range area by either:
— choosing Ignore
— clicking Inspect Destination Layer4 Range and entering a value for both
the maximum value and the minimum value
10 Complete the Source IP Layer4 Port Range area by either:
— choosing Ignore
— clicking Inspect Source Layer4 Range and entering a value for both the
maximum value and the minimum value
11 Enter the name you want to assign to the newly created layer 2 filter group.
12 Click the arrow on the far left to add the newly created filter into the filter
group.
13 Repeat steps 2 to 10 to add additional filters into the filter group.
14 Go to“Configuring QoS Quick Config meters” on page 247.
To use an existing filter group:
Using Web-based Management for the Business Policy Switch 2000 Software Version 2.0