Download Avaya Business Communications Manager - WLAN IP Telephony Configuration Guide

Chapter 7 WLAN Handset configuration
97
To test the wireless handsets
1
Power on the wireless handset by pressing Power On/Start Call. A series of messages display
as the wireless handset acquires the system. The wireless handset displays the user extension
or display dashes if no extension is programmed. Any error messages clear.
2
Press the Power On/Start Call key. The extension number is replaced by information from
the Call Server and dial tone is heard. Place a call and listen to the audio quality. End the call
by pressing the Power Off/End Call key.
3
Place a call to the wireless handset and verify ring, answer, clear transmit, and clear receive
audio.
4
Use the FCN key to verify all programmed features on the wireless handset.
5
Press the Power On/Start Call key. Any line indicators turn off and the extension number
display returns.
Diagnostic Tools
Run Site Survey, Diagnostics Mode and Syslog Mode are provided to assist the WLAN
administrator to evaluate the functioning of the handset and the VoWLAN system. These tools are
enabled from the handset Admin menu.
Run Site Survey
Site Survey is used to evaluate the facility coverage before certifying that an installation is
complete. It can also be used at any time to evaluate coverage by testing signal strength, to gain
information about an AP, and to scan an area to look for all APs regardless of ESSID. The
information available through Site Survey includes:
•
•
•
•
ESSID
beacon interval
information regarding support of various protocols and standards, as required
current security configuration
When Run Site Survey begins, it is in single ESSID mode. Press the Any soft key to switch to all
APs (regardless of ESSID) mode; the Any soft key changes to MyID. The display looks like the
following in multiple AP mode:
111111 -22 33
111111 -22 33
111111 -22 33
111111 -22 33
MyID
444
444
444
444
Detl
WLAN IP Telephony Installation and Configuration Guide