Download Avaya 4600 Series Application Note

The Topline Push Type
Priorities and States
Topline Push Content is sent with one of two priorities: normal or barge. Normal priority push
conditions are specified first, followed by barge priority push conditions.
Pushable vs. Non-Pushable States
The following are non-pushable states for Topline pushes to an IP telephone:
●
When the telephone is in the process of restoring a retrieved backup file
●
When a Local Procedure has been initiated. See the 4600 Series LAN Administrator Guide
on the http://www.avaya.com/support Web site for more details on Local maintenance
procedures
●
When the telephone is in any text entry mode (for normal priority)
●
When any Call Appearance is in the Alerting (for normal priority)
●
When the telephone is in Soft-Hold call state (for normal priority)
If a phone is not in one of the above states, it is considered to be in a pushable state, meaning
the telephone will accept a Pushed Message.
Successful Push Response
If the phone is in a pushable state, the Push Agent sends the Push Initiator the following
response for all Push request modes and all Push request types:
Parameter
Status Code
Reason Phrase
HTTP Status Code
200
“OK”
x-Push-Status
200
“Push Message Accepted”
Issue 1 April 2005
39