Download Ariens SNO-THRO 924119 - 1028 User's Manual

Sno-Thro
®
Parts Manual
Models
924119 -1028
924120 -1024
924333 -1024
924334 -1128
924502 -1332
924503 -1336
924504 - 936
02487800D 2/01
Supercedes 02487800, A,B,C
Printed in USA
THE MANUAL
PRODUCT REGISTRATION
Before you operate your unit, carefully and completely
read manuals supplied with the unit. The contents will
provide you with an understanding of safety instructions
and controls during normal operation and maintenance.
For your safety and the safety of others always read,
understand, and follow all DANGER, WARNING, and
CAUTION messages found in manuals and on safety
decals.
A warranty registration card must be filled out, signed,
and returned at time of purchase. This card activates the
warranty. Claims meeting requirements during limited
warranty period will be honored..
YOUR SATISFACTION IS IMPORTANT
Questions? Please follow these helpful steps:
1. Refer to the manuals supplied with your unit.
They will guide you through safe and proper
operation and maintenance.
They contain specifications on your unit.
If your questions are not answered in these manuals,
go to step number two.
2. Contact Your Dealer.
Our dealers will be happy to supply any service or
advice required to keep your unit operating at peak
efficiency.
A factory trained staff is available to support your
equipment needs. They stock genuine Ariens parts
and lubricants manufactured with the same precision
and skill as the original.
If your questions are not resolved by the support
staff, ask for the manager or owner.
When contacting your Dealer supply your model and
serial numbers.
Hardware descriptions are given in decimals.
Decimals to Fractions
.063
1/16
.563
9/16
.125
1/8
.625
5/8
.188
3/16
.688
11/16
.250
1/4
.750
3/4
.313
5/16
.813
13/16
.375
3/8
.875
7/8
.438
7/16
.938
15/16
.500
1/2
1.00
1
SERVICE AND REPLACEMENT PARTS
When ordering replacement parts or making service
inquiries, know the Model and Serial numbers of your unit
and engine.
Numbers are located on the product registration card in
the unit literature package. They are printed on a serial
number label, located on the frame of your unit.
• Record Unit Model and Serial numbers here:
TO SPEED PARTS ORDERING:
1.
2.
3.
4.
• Record Engine Model and Serial numbers here:
UNAUTHORIZED REPLACEMENT PARTS
Use only Ariens replacement parts. The replacement of
any part on this vehicle with anything other than an
Ariens authorized replacement part may adversely affect
the performance, durability, or safety of this unit and may
void the warranty. disclaims liability for any claims or
damages, whether warranty, property damage, personal
injury or death arising out of the use of unauthorized
replacement parts.
2
Know the model and serial numbers of your unit.
Know the part number required.
Know the quantity required.
Know the part description.
MODELS
TABLE OF CONTENTS
Domestic
DECALS
Model 924119 (1028)
10 H.P. 28” Sno-Thro
Serial No. 000101 and up
Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ENGINE AND DRIVE
Model 924120 (1024)
10 H.P. 24” Sno-Thro
Serial No. 000101 and up
Engine and Belt Drive . . . . . . . . . . . . . . . . . . . . . . . . 6
MAIN FRAME
International
Speed Selector and Frame . . . . . . . . . . . . . . . . . . . . 8
Wheels and Axle . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Reduction Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Friction Wheel Drive . . . . . . . . . . . . . . . . . . . . . . . . . 13
Model 924333 (1024)
10 H.P. 24” Sno-Thro
Serial No. 000101 and up
OPERATORS CONTROLS
Model 924334 (1128)
11 H.P. 28” Sno-Thro
Serial No. 000101 and up
Handlebar and Controls . . . . . . . . . . . . . . . . . . . . . . 14
Headlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Global
BLOWER
Model 924502 (1332)
13 H.P. 32” Sno-Thro
Serial No. 000101 and up
Auger and Battery . . . . . . . . . . . . . . . . . . . . . . . . . .
Gear Case-Aluminum. . . . . . . . . . . . . . . . . . . . . . . .
Gear Case-Cast Iron . . . . . . . . . . . . . . . . . . . . . . . .
Discharge Chute Crank . . . . . . . . . . . . . . . . . . . . . .
Electric Discharge Chute . . . . . . . . . . . . . . . . . . . . .
Model 924503 (1336)
13 H.P. 36” Sno-Thro
Serial No. 000101 and up
18
21
22
24
26
BRUSH
Model 924504 (936)
9 H.P. 36” Sno-Brush
Serial No. 000101 and up
Brush Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Brush Drive Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
ELECTRICAL SYSTEMS
Continuity Diagram (333, 334) . . . . . . . . . . . . . . . . .
Wiring Diagram (333, 334) . . . . . . . . . . . . . . . . . . . .
Continuity Diagram (502, 503) . . . . . . . . . . . . . . . . .
Wiring Diagram (502, 503)) . . . . . . . . . . . . . . . . . . .
Continuity & Wiring Diagrams (119, 120, 504) . . . . .
3
32
33
34
35
36
© Copyright 2000, 2001 Ariens Company
DECALS
Model 924119, 120, 333, 334, 502, 503
1
2
1028
08084300A
7
3
4
6
7
5
7
8
PS0414
Item Part No.
1
2
3
4
5
6
7
8
08085000
08084900
08085300
08085100
08084800
08084200
08084300
08084400
08084500
08084600
07746400
07733900
07797600
07751100
62447800
07864400
Qty.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Description
Decal-Dash 1028 (119)
Decal- 1024 Dash (120)
Decal- 1024/1128 Dash (333, 334)
Decal- 1332/1336 Dash (502, 503)
Decal- 936 Dash (504)
Decal- 1024 Front Panel (120, 333)
Decal- 1028 Front Panel (119)
Decal- 1128 Front Panel (334)
Decal- 1332 Front Panel (502)
Decal- 1336 Front Panel (503)
Decal-Ariens Jewel
Decal-Primer
Decal- Cast Iron Bore
Decal-A+
Decal-Set-Danger (119, 120, 333, 334, 502, 503)
Decal-Differential Lock (120, 333, 334, 502, 503)
4
DECALS
Model 924504
2
1
936
Power Brush
CAUTION / PRUDENCE / CUIDADO
Engage traction drive clutch before attachment clutch.
Enclencher l'embrayage de traction avant l'embrayage de l'outil.
Activar el embrague de la transmisión de dirección de la tracción
antes del embrague del accesorio.
08084700A
08084800
CAUTION / PRUDENCE / CUIDADO
Read the operator’s manual.
Lire le manuel d’utilisation.
Leer el manual del operador.
4
3
6
7
Adjust brush height before operating.
Régler la hauteur du balai avant l’utilisation.
Ajustar la altura de la escobilla antes de ponerla en
funcionamiento.
Engage traction drive clutch before attachment clutch.
Enclencher l’embrayage de traction avant l’embrayage
de l’outil.
Activar el embrague de la transmisión de dirección
del tractor antes del embrague del accesorio.
Operating on irregular terrain could cause the brush
to dig in and drive the machine rearward.
Le balai risque de se planter dans le sol et d’entraîner
la machine vers l’arrière lors d’utilisation sur terrain
accidenté.
El uso en terreno irregular puede hacer que la escobilla
se entierre y hacer que la unidad se desplace hacia
atrás.
07873100B
5
07797600
078644A
8
PS0870
Item Part No.
1
2
3
4
5
6
7
8
08084800
08084700
07746400
07733900
07797600
07751100
07873100
07864400
Qty.
1
1
1
1
1
1
1
1
Description
Decal- 936 Dash
Decal- 936 Front Panel
Decal-Ariens Jewel
Decal-Primer
Decal- Cast Iron Bore
Decal-A+
Decal, Caution
Decal-Differential Lock
5
ENGINE AND BELT DRIVE
Model 924119, 120, 333, 334, 502, 503, 504
51
49
48
3
43
50
5
1
11
6
54
55
2
8
11
46
47
12
7
10
4
56
9
53
15
14
17
44
23
13
19
30
29
8
28
5
26
18
5 22
31
32
21 27
22
33
34
25
37
35
20
26
16
24
5
39
52
23
36
38
40
45
Item
1
2
3
4
5
6
7
8
9
Part No.
06529800
06310500
08262200
08260700
08260800
08261000
08261100
08261200
02410900
06435700
06308600
05947300
06005500
02489100
02435700
Qty.
1
1
1
1
1
1
1
1
1
5
2
2
4
1
1
Description
Nut-Locking-Center .31-18
Washer-Lock Internal .31
Engine, 10HP L Head Tecumseh - 120 Volt (119)
Engine, 10HP OHV Tecumseh- 120 Volt (120)
Engine, 10HP OHV Tecumseh- 12 Volt (333)
Engine, 11HP Tecumseh OHV 12 Volt (334)
Engine, 13HP Tecumseh 12 Volt (502, 503)
Engine, 9HP Tecumseh OHV (504)
Belt Finger
Washer-Flat-Steel .38 x .875 x .083
Washer-Locking .31 x .078
Bolt-Hex .31-24 x .75 Grade 5
Screw-Set .31-18 x .38
Engine Sheave (119, 120, 333, 334, 502, 504)
Engine Sheave (503)
6
41
42
PS0448
ENGINE AND BELT DRIVE
Model 924119, 120, 333, 334, 502, 503, 504
Item
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
Part No.
06601800
07412000
02489000
07238500
07238400
07238300
07236200
07325700
07211200
07236100
07005300
07307000
02438900
05947900
06529700
02423651
06529800
05947500
02434851
01213100
02457400
06437200
01103100
02453751
06530300
01026000
06436500
06707000
08309400
05503700
02442800
08317200
07412100
02435300
06707400
02434751
02435400
02411000
06530400
07411600
06306800
06533200
02483100
21533500
07531800
07532000
05502100
07533200
06436700
06529200
06307400
Qty.
1
2
1
1
1
1
1
1
1
1
3
1
1
2
2
1
2
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
3
3
1
1
1
1
1
1
1
1
1
3
3
Description
Key-Straight .25 x 1.75 x .25
Screw-Tap .25-20 x .50
Belt Cover
V-Belt (119)
V-Belt (120, 333, 334, 504)
V-Belt (502)
V-Belt (503)
Pulley-V 8.40 x 1.0 with Key
V-Belt -Traction Drive (119, 120, 333, 334, 504)
V-Belt -Traction Drive (502, 503)
Bolt-Serrated Round Head Slotted .31-18 x .75 (503)
Pulley-V 9.0 x 1.25
Hub (119, 120, 333, 334, 502, 503))
Bolt-Hex .25-20 x .50 Grade 5 (120, 333, 334, 502, 503, 504)
Nut-Locking-Center .25-20 (120, 333, 334, 502, 503, 504)
Belt Retainer (120, 333, 334, 502, 503, 504)
Nut-Locking Center .31-18
Bolt-Hex .31-18 x 1.25 Grade 5
Idler Arm
Bearing Spacer
Idler
Washer-Flat-Steel .344 x .688 x .065
Spacer
Idler Arm
Nut-Locking-Nylon .625-18
Wave Washer
Washer-Flat-Steel .382 x .812 x .023
Pin-Cotter .09 x 1.00
Spring-Tension .80 x .73 x 3.06
Bushing-Flange-Nylon .500 x .625 x .312 x .750
Activating Shaft
Spring-Tens .047 x .44 x 3.37
Screw-Tapping 10-24 x .375
Return Clip
Pin-Cotter .09 x .50
Bracket
Pin-Clevis
Belt Finger
Nut-Locking-Flange .312-18 (503)
Screw-Tap .25-20 x .37
Washer-Lock-External .262 x .502 x .026 (503)
Nut-Hex .25-20 (503)
Cord-Extension-110V (119, 120)
Plug-Spark
Fuel Cap
Key, Push/Pull-Tecumseh (119, 120)
Bushing-Flange .500 x.625 x.500 x.750
Boot, Eyelet Terminal(333, 334, 502, 503)
Washer-Flat-Steel .323 x .625 x .062
Nut-Hex .312-18
Washer-Locking .312 x .097 Heavy
7
SPEED SELECTOR AND FRAME
Model 924119, 120, 333, 334, 502, 503, 504
1
2
3
4
5
6
7
8
9
10
11
14
12
30
31
13
15
16
28
18
27
17
23
20
7
21
26
22
29
19
24
25
24
PS0485
8
SPEED SELECTOR AND FRAME
Model 924119, 120, 333, 334, 502, 503, 504
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Part No.
07516700
05708600
07509600
02444851
08318400
05947700
06529800
02462600
06529700
05948000
06713500
02487600
02487700
02477900
06706900
06436500
01215100
02476300
02485359
02401800
02483500
05531500
05947500
07411600
07411500
02477159
06437200
06441900
06707300
07028500
06219800
06537500
Qty.
1
2
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
2
2
1
1
2
4
1
1
1
1
2
2
2
Description
Hole Plug
Ring-Retainer-External .500 x .015
Knob
Rod
Spring, Tension .055 x .33 x 1.31
Bolt-Hex .25-20 x 1.00
Nut-Locking-Center .312-18
Pivot
Nut-Locking-Center .25-20
Bolt-Hex .31-18 x 3.50
Pin-Hair Internal .08 x .18 x 1.18
Rod, Shift-Upper
Rod, Shift-Lower
Pivot, Rod
Pin-Cotter .09 x .75
Washer-Flat-Steel .382 x .812 x .023
Clevis Pin .370/.375 x .688
Arm, Shift
Main Frame
Bolt Strap (119, 120, 333, 334, 504)
Bolt Strap (502, 503)
Bushing-Sleeve .328 x .50 x .75
Bolt-Hex .31-18 x 1.25 Grade 5
Screw-Tapping .250-20 x .37 Hex Washer Head
Screw-Tapping .31-18 x .50 Hex Washer Head
Cover, Bottom
Washer-Flat-Steel .344 x .688 x .065
Washer-Flat-Steel .531 x 1.06 x .095
Pin-Cotter .12 x .75
Bolt-Hex Flanged Whiz Lock Head .38-16 x .75
Bolt-Round Head Square Neck .25-20 x 1.00 Grade 5
Nut-Locking Wing .25-20
9
WHEELS AND AXLE
Model 924119
1
12
3
13
8
14
10
2
8
11
7
9
6
5
33
10
8
4
11
13
PS0800
9
8
Model 924120, 333, 334, 502, 503, 504
18
16
27
19
3
14
23
28
22
21
29
20
15
31
30
26
25
35
37
32
24
36
34
17
38
39
33
PS0790
10
WHEELS AND AXLE
Model 924119, 120, 333, 334, 502, 503, 504
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Part No.
Qty.
07150300 2
07150500 2
07121800 2
07121600 2
02483200 1
05718400 1
02439600 1
06600800 1
06436900 4
00301700 2
05409300 2
01014200 2
07053700 2
06529700 6
07103700 2
07108700 2
07107600 2
07107700 2
07121900 2
07121700 2
02437151 1
02440951 1
52405400 AR
52405500 AR
02437051 1
02441051 1
05505700 1
06307000 1
07012600 1
05502900 1
52405900 1
01037400 1
08300700 1
01037200 1
05948100 1
06530900 1
05803200 1
01037500 1
52405300 1
05803000 1
07412200 8
02457859 2
05417700 2
06437400 2
07028600 8
06530100 8
Description
Tire/Wheel Assembly 16 x 6.50 - 8 (119)
Wheel 6.50 x 8.00 (119)
Tire 4.80-8 (120, 333)
Tire 16 x 6.50-8 (119, 334, 502, 503, 504)
Shaft, Axle (119)
Ring, Retaining .875 x .050 (119)
Spur Gear (119)
Woodruff Key .25 x .875 x .375 (119)
Washer-Flat-Steel .88 x 1.25 x .062 (119)
Bearing Flange (119)
Bearing, Ball .88 x 1.75 x .50 (119)
Flange, Bearing (119)
Pin-Lock .31 x 1.75 (119)
Nut-Locking-Center .25-20 (119)
Tube 4.00 x 8 (120, 333)
Tube 6.50 x 8 (119, 334, 502, 503, 504)
Wheel 4.80-8 (120, 333)
Wheel 6.50-8 (334, 502, 503, 504)
Tire/Wheel Assembly #34-4.80/4.00 x 8 (120, 333)
Tire/Wheel Assembly #35-16 x 6.50 (334, 502, 503, 504)
Axle-Right Hand (502, 503)
Axle-Right Hand (120, 333, 334, 504)
Axle Assembly-Left Hand (Contains Items 19-23) (502, 503)
Axle Assembly-Left Hand (Contains Items 19-23) (120, 333, 334, 504)
Axle-Left Hand (502, 503)
Axle-Left Hand (120, 333, 334, 504)
Bushing-Sleeve .750 x .814 x .750 (120, 333, 334, 502, 503, 504)
Washer-Locking .250 x .047 (120, 333, 334, 502, 503, 504)
Fitting-Lube .25-28 x .256 (120, 333, 334, 502, 503, 504)
Bushing-Sleeve .562 x .625 x .625 (120, 333, 334, 502, 503, 504)
Lockout Hub Assembly (Contains Items 25-27, 30, 31) (120, 333, 334, 502, 503, 504)
Pin (120, 333, 334, 502, 503, 504)
Spring-Compression .028 x.34 x 1.062 (120, 333, 334, 502, 503, 504)
Lockout Hub (120, 333, 334, 502, 503, 504)
Screw-Cap .25-20 x 2.00 Grade 8 (120, 333, 334, 502, 503, 504)
Nut-Jam-Nylon .250-20 (120, 333, 334, 502, 503, 504)
Pin-Roll .093 x 1.00 (120, 333, 334, 502, 503, 504)
Knob (120, 333, 334, 502, 503, 504)
Differential Assembly (120, 333, 334, 502, 503, 504)
Pin Roll .188 x 1.50
Screw-Tap .50-20 x .62 Hex Head (120, 333, 334, 502, 503, 504)
Bearing Retainer (120, 333, 334, 502, 503, 504)
Bearing-Ball 1.13 x 2.19 x .63 (120, 333, 334, 502, 503, 504)
Washer-Flat-Steel 1.140 x 1.718 x .134
Bolt Serrated Neck Slotted .25-20 x .50
Nut-Locking-Flange .250-20
11
REDUCTION DRIVE
Model 924119, 120, 333, 334, 502, 503, 504
6
5
7
10
4
9
8
3
11
17
2
2
12
16
23
13
14
22
1
22
14
24
15
21
19
14
20
18
PS0463
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Part No.
02477300
06437200
02476800
05531600
06436600
00308500
05435200
02414100
06530600
06536400
05718300
07530500
06529800
06436100
02436700
02477700
07029700
05802900
05800900
52403200
02436800
05502600
06435700
06536100
Qty.
1
2
1
1
1
1
1
1
4
1
1
1
1
6
1
1
1
1
1
1
1
2
2
1
Description
Hex Shaft
Washer-Flat-Steel .344 x .688 x .065
Hex Shaft
Spacer .450 x .75 x 1.60
Washer-Flat-Steel .505 x .880 x .072
Bearing Flange
Bearing-Ball .437 x 1.375 x .437
Bearing Flange
Nut-Locking Dual Face 10-24
Nut-Locking-Center .438-14
Ring-Retaining External .31 x .025
Idler
Nut-Locking-Center .31-18
Washer-Flat-Steel .630 x 1.005 x .062
Pinion Shaft
Roller Chain #41-34 Pitches
Drive Fitting-Hydraulic
Pin Roll .156 x 1.00
Pin, Roll .125 x 1.00
Pinion and Sprocket Assembly (Contains Items 21, 22)
Pinion and Sprocket
Bushing-Flange .625 x .750 x .50 x .875
Washer-Flat-Steel .38 x .875 x .083
Nut, Jam .31-18
12
FRICTION WHEEL DRIVE
Model 924119, 120, 333, 334, 502, 503, 504
13
12
7
14
11
7
3
9
5
8
2
6
10
16
4
18 19
24
1
20 22
15
17
25
23
1
21
26
20
PS0452
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Part No.
Qty.
07411500 8
02445500 1
00300300 1
02445400 1
05702100 1
06436900 1
05502600 2
05512600 1
06530500 1
05409300 1
02444500 1
52404600 AR
02477000 1
05802900 2
01054600 1
02407100 1
02407600 1
06600600 1
02458200 1
05435100 2
02415500 1
00303400 1
06437200 1
06308600 1
05946900 1
02458100 1
Description
Screw-Tapping .312-18 x .50
Spindle Hub
Friction Disc
Disc Hub
Ring-Retaining-Internal 1.750 x .062
Washer-Flat-Steel .880 x 1.250 x .062
Bushing-Flange .625 x .750 x .500 x .875
Bushing-Sleeve .882 x 1.250 x .531
Nut-Locking-Nylon .875-14
Bearing-Ball .88 x 1.75 x .50
Carrier
Friction Wheel Assembly (Contains 1-11)
Carrier Shaft
Pin-Roll .156 x 1.00
Drive Plate
Drive Disc Spacer 1.3 x .76 x .19
Spindle
Key-Woodruff .125 x .50 x .203
Housing Mount
Bearing .625 x 1.375 x .43
Bearing Spacer
Roller
Washer-Flat-Steel .344 x .688 x .065
Washer-Lock .31 x .078
Bolt-Hex .31-18 x 1.00 Grade 5
Spindle Housing
13
HANDLEBARS AND CONTROLS
Model 924119, 120, 333, 334, 502, 503, 504
2
8
25
7
1
9
4
31
22
10
23
21
81
74
68
11
84
84
11
77
46 76
13
58
4
59
17
19
56
29
83
79
80
14
12
30
82
78
12
57
75
4
48
72
21
20
3
73
24
5
15
54
71
5
81
25
53 16
28
18
67
26
60
64
11
61
63
6
12
65
66
62
27
34
37
51
32
69
50
38
33
41
39
36
55
35
70
49
42
43
40 48
47
52
45
44
PS0812
14
HANDLEBARS AND CONTROLS
Model 924119, 120, 333, 334, 502, 503, 504
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
Part No.
Qty.
Description
53209400
53209500
02487300
06529700
02464700
07511200
02462100
07411800
07511800
02486451
06707400
06437300
02476500
02476700
08335400
02463400
05516100
05946800
08310900
06530800
05803300
05800900
02463000
06436700
05516200
06945300
06306900
06517300
07517700
02460700
05952500
52413700
52413800
52413900
52414100
52416000
52414000
52416100
06945200
52707300
02488800
02488900
02488700
01054200
02408600
06005500
02213500
02422851
06707400
1
1
1
2
2
1
2
4
2
1
2
2
1
1
2
1
1
1
1
2
2
1
1
2
4
1
1
1
1
1
2
AR
AR
AR
AR
AR
AR
AR
1
1
1
1
1
1
1
1
1
1
1
Handlebar, Upper Right Hand (Includes Hand Warmer)
Handlebar, Upper Left Hand (Includes Hand Warmer)
Handlebar, Lower
Nut-Lock-Center .25-20
Handle Pivot
Bushing-Snap (119, 120, 333, 334)
Lever-Clutch-Coated
Screw-Tapping 12-14 x 1.50
Bumper
Bracket, Cable Support (119, 502, 503)
Pin, Cotter .09 x .50
Washer-Flat-Steel .281 x .62 x .065
Right Hand Lever
Left Hand Lever
Spring-Tension .051 x .50 x 4.87
Arm-Latch
Bushing-Flange .265 x .437 x .339 x .62
Bolt-Hex .25-20 x .75
Spring-Tension .048 x .44 x 1.75
Nut-Crown .312-18
Pin Roll .156 x .75
Pin-Roll .125 x 1.00
Rod
Washer-Flat-Steel .323 x .625 x .062
Bushing-Flange .325 x .465 x .333 x .685
Cable, Traction Clutch (119, 502, 503)
Washer-Locking-Internal .625 x .045 (333, 334, 502, 503)
Nut-Panel .625-32 (333,334, 502, 503)
Cap-Ignition Switch (333,334, 502, 503)
Key-With Cap (333,334, 502, 503)
Bolt-Hex .25-20 x 1.50 Grade 5
Panel with Decal (504)
Panel with Decal (120)
Panel with Decal (119)
Panel with Decal (333)
Panel with Decal (334)
Panel with Decal (502)
Panel with Decal (503)
Cable, Blower Clutch
Switch Assembly (Contains 29-31) (333, 334, 502,503)
Wire Harness-Hand Warmers and Light (119, 120, 504)
Wire Harness 12 Volt (333, 334)
Harness, Wire (502, 503)
Adapter Spacer
Spacer 1.0 x .64 x .38
Screw-Set .32-18 x .38
Rod Adapter
Clutch Engagement Yoke
Pin-Cotter .09 x .50
15
HANDLEBARS AND CONTROLS
Model 924119, 120, 333, 334, 502, 503, 504
Item
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
Part No.
06707000
02406900
08309400
02427200
06307400
52404700
06529800
05947000
02422700
06530200
02485551
06426600
05947900
05802600
02485700
06403800
06403800
07516700
07508300
01123800
02463900
08320900
06529600
06436200
02463100
02486500
05711300
06221600
06436100
07517300
06530400
06212300
06220200
06446800
07531700
06439400
02485600
05947700
06530100
02489900
06436600
07028500
06909400
06310900
06310900
Qty.
2
1
1
1
4
1
3
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
1
1
1
2
4
1
2
4
2
2
4
4
4
1
1
1
1
6
4
1
1
2
Description
Pin-Cotter .09 x 1.00
Fork Pivot Rod
Spring-Tension .080 x .73 x 3.06
Clutch Fork
Washer-Locking .312 x .097 Heavy
Spring Assembly
Nut-Locking-Center .31-18
Bolt-Hex .31-18 x .75 Grade 5
Adapter
Nut-Locking-Nylon .312-18
Lever, Clutch
Washer-Flat-Steel .281 x 1.00 x .063
Bolt-Hex .25-20 x .50
Pin-Roll .156 x .88
Switch, Hand Warmer
Washer-Flat-Steel .505 x .875 x .024 (119, 120, 333, 334, 504)
Washer-Flat-Steel .505 x .875 x .024 (502, 503)
Hole Plug (119, 502, 503)
Knob (119, 502, 503)
Friction Washer (119, 502, 503)
Pressure Flange (119, 502, 503)
Spring-Compression .187 x .56 x 1.62 (119, 502, 503)
Nut-Locking .375-16 (119, 502, 503)
Washer-Flat-Steel .406 x .812 x .065 (119, 502, 503)
Spacer (119, 502, 503)
Lever-Deflector (119, 502, 503)
Ring-Retaining External .375 x .010 (119, 502, 503)
Bolt-Round Head Square Neck .31-18 x 2.25 Grade 5
Washer-Flat-Steel .630 x 1.005 x .062
Cable Tie 5.5"
Nut-Locking-Flange .312-18
Bolt-Round Head Square Neck .31-18 x 2.75
Bolt-Round Head Square Neck .31-18 x 1.75
Washer, Saddle-.320 x .937 x .062
Knob- Wing .312-18
Washer-Flat-Steel .328 x .875 x .062
Switch, Chute Rotation (502, 503)
Bolt-Hex .25-20 x 1.00 Grade 5
Nut-Locking-Flange .250-20
Spacer .265 x .355 x .312
Washer-Flat-Steel .505 x .880 x .072
Bolt-Hex Flanged Whiz Lock Head .38-16 x .75
J-Clamp
Washer-Locking-Internal .563 x .040(119, 120, 333, 334, 504)
Washer-Locking-Internal .563 x .040 (502, 503)
16
HEADLIGHT
Model 924119, 120, 333, 334, 502, 503, 504
6
2
7
2
8
3
4
1
9
5
10
PS0422
tem
1
2
3
4
5
6
7
8
9
10
Part No.
Qty.
02485900 AR
06307200 2
06216100 1
05952600 1
06529200 1
02464900 1
02465000 1
06530400 1
06307400 1
07517300 2
Description
Headlight (Contains 2-9)
Washer-Lock-External .313 x .030
Bolt-Round Head Square Neck .312-18 x 1.00
Bolt-Hex .31-18 x 2.50 Grade 2
Nut-Hex .312-18
Lens
Bulb
Nut-Flange .312-18
Washer-Lock .312
Cable Tie
17
AUGER AND BATTERY
Model 924119, 120, 333, 334, 502, 503
15
56
17
12
54
55
17
15
58
59
14
60
18
16
30
43
22
6
5
20
7
1
45 46
8
51
36 53
48 47 52
49
21 13
22
36
11
50
2
57
62
36 44
42
37
3
32 34
38
30
29
24
26
25
33
40
19
13
31
10
10
4
41
27
39
9
25
23
35
28
PS0437
18
AUGER AND BATTERY
Model 924119, 120, 333, 334, 502, 503
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Part No.
Qty.
Description
09032300
1
A/R
1
1
2
6
2
2
1
4
10
1
1
4
1
2
1
2
1
2
1
1
1
1
1
1
2
2
4
5
5
7
6
1
1
1
1
1
7
9
8
4
1
1
1
1
1
1
1
1
1
1
Cover, Battery (333, 334, 502, 503)
Battery Recommend 340 to 350 CCA at 0° F. Size U1R or U1L (333, 334, 502, 503)
Battery Tray (503)
Battery Tray (333, 334, 502)
Bolt-Round Head Square Neck .25-20 x 7.00 (333, 334, 502, 503)
Washer-Flat-Steel .281 x .62 x .065 (333, 334, 502, 503)
Wing Nut-Locking .25-20 (333, 334, 502, 503)
Washer-Flat-Steel .406 x .812 x .065 (333, 334, 502, 503)
Solenoid (333, 334, 502, 503)
Bolt-Hex .25-20 x .75 Grade 5 (333, 334, 502, 503)
Nut-Lock-Flange .25-20
Cover, Solenoid (333, 334, 502, 503)
Rod, Chute (119, 502, 503)
Washer-Flat-Steel .438 x 1.00 x .083
Spring, Compression (119, 502, 503)
Washer-Flat-Steel .281 x .62 x .065 (119, 502, 503)
Wave Washer (120, 333, 334)
Ring, Retaining-External .218 x .035 (119, 502, 503)
Washer-Plastic .390 x .875 x .062 (120, 333, 334)
Screw-Tapping .25-20 x .50 Hex Washer Head (333, 334, 502, 503)
Blower Housing w/Decal 28" (119)
Blower Housing w/Decal 24" (120)
Blower Housing w/Decal 24" (333)
Blower Housing w/Decal 28" (334)
Blower Housing w/Decal 32" (502)
Blower Housing w/Decal 36" (503)
Runner, Skid Shoe-1/2" Flange (120, 333, 334, 502, 503)
Runner, Double Flange (119)
Nut-Locking .375-16 (119, 502, 503)
Nut-Locking .375-16 (120, 333, 334)
Washer-Flat-Steel .38 x .875 x .083 (119, 120, 333, 334)
Washer-Flat-Steel .38 x .875 x .083 (502)
Washer-Flat-Steel .38 x .875 x .083 (503)
Scraper Blade 28" (119)
Scraper Blade 24" (120, 333)
Scraper Blade 28" (334)
Scraper Blade 32" (502)
Scraper Blade 36" (503)
Nut-Locking-Center .31-18 (119, 120, 333, 334)
Nut-Locking-Center .31-18 (502)
Nut-Locking-Center .31-18 (503)
Fitting-Lube .25-28 x .256
Rake, Left Hand - 28" (16" O.D.) (334)
Rake, Right Hand - 28" (16" O.D.) (334)
Rake, Right Hand - 24" (16" O.D.) (120, 333)
Rake, Left Hand - 24" (16" O.D.) (120, 333)
Rake, Left Hand - 28" (15" O.D.) (119)
Rake, Right Hand - 28" (15" O.D.) (119)
Rake, Left Hand - 32" (16" O.D.) (502)
Rake, Right Hand - 32" (16" O.D.) (502)
Rake, Left Hand - 36" (16" O.D.) (503)
Rake, Right Hand - 36" (16" O.D.) (503)
02484559
02488659
06220400
06437300
06537500
06436200
03679000
05946800
06530100
02484459
02479800
06435900
08335200
06437300
01320200
05718500
06416800
07412000
52414200
52414300
52414400
52414500
52414600
52414700
02483059
02483859
06529600
06529600
06435700
06435700
06435700
02479159
01016400
00620159
00620859
03519259
06529800
06529800
06529800
07012600
52410700
52410800
52413600
52413500
52411800
52411900
52412200
52412300
52412500
52412600
19
AUGER AND BATTERY
Model 924119, 120, 333, 334, 502, 503
Item
Part No.
28 51001500
29 00301700
03086200
30 06211800
06211800
31 06212000
32 05418200
05406300
33 07028600
34 06212200
06212200
06212200
35 06436300
36 06529700
37 02437451
38 05503500
39 06436400
40 06306600
41 05947100
42 08316400
43 06441100
44 02440551
45 02448100
46 06707500
47 05946800
48 52404800
49 02217800
50 06806700
51 07028500
52 07002600
53 01014200
03086100
54 06437200
55 06945400
56 52411000
57 05947900
58 06908200
59 05959400
60 52410900
61 06308400
62 07533200
Qty.
2
1
1
2
3
3
1
1
6
5
7
6
2
6
2
2
2
2
2
1
1
1
1
1
1
1
1
2
2
2
1
1
1
1
1
2
1
1
1
2
2
Description
Shear Bolt Service Assembly (Includes Item 25)
Bearing Flange (119,120, 333, 334, 502)
Bearing Flange (503)
Bolt-Round Head Square Neck .38-16 x .75 (119, 502, 503)
Bolt-Round Head Square Neck .38-16 x .75 (120, 333, 334)
Bolt-Round Head Square Neck .38-16 x 1.00
Bearing-Ball 1.0 x 2.0 x .56 (503)
Bearing-Ball .750 x 1.750 x .50 (119, 120, 333, 334, 502)
Bolt-Serrated-Neck-Slotted .25-20 x .50
Bolt-Round Head Square Neck .312-18 x .62 (119, 120, 333, 334, 502)
Bolt-Round Head Square Neck .312-18 x .62 (502)
Bolt-Round Head Square Neck .312-18 x .62 (503)
Washer-Flat Steel 1.010 x 1.505 x .062
Nut-Locking-Center .25-20
Bearing Support
Bushing-Flange 1.000 x 1.12 x .62 x 1.50
Washer-Flat-Steel .511 x 1.441 x .125
Washer-Lock .500 x .151
Bolt-Hex .50-13 x 1.00 Grade 5
Spring-Tension .062 x .56 x 8.0
Washer-Flat-Steel .52 x .827 x .062 (120, 333, 334)
Arm Extension (119)
Clevis Pin
Pin-Cotter .06 x .75
Bolt-Hex .25-20 x .75 (119)
Brake Arm Assembly (Contains Items 49, 50)
Brake Lining
Rivet-Tubular .187 x .437
Bolt-Hex Flanged Whizloc Head .38-16 x .75
Nut-Retainer .38-16
Bearing Flange (119, 120, 333, 334, 502)
Bearing Flange (503)
Washer-Flat-Steel .344 x .688 x .065 (119, 502, 503)
Cable, Control (119, 502, 503)
Chute, Discharge with Remote (119, 502, 503)
Bolt-Hex .25-20 x .50 Grade 5
Clamp-Cushioned (119, 502, 503)
Bolt-Hex .38-16 x .75 (119, 502, 503)
Chute, Discharge without Remote (120, 333, 334)
Washer-Locking .25 x.062 Regular
Boot, Eyelet Terminal (333, 334, 502, 503)
20
GEAR CASE-ALUMINUM
Model 924119
8
2
4
5
7
3
14
10
12
11
24
6
1
13
15
13
26
16
11
17
25
14 21
21
9
22
18
19
23
17
20
19
PS0692
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Part No.
Qty.
05803700 2
02477251 1
05618900 1
05511200 1
03210300 1
05804500 1
06600100 1
52413400 AR
07412900 1
06219700 2
05618800 2
02470600 1
05530100 2
52402600 1
00925700 1
02470700 1
06530100 4
07413000 2
05803000 2
05806900 1
06416600 2
05520600 1
02479300 1
06219800 2
06442500 1
00008000 1
Description
Pin-Roll .250 x 1.75
Impeller-.75 I.D.x 12" O.D.
Seal, Oil .750 x 1.375 x .312
Bushing-Flange .75 x 1.00 x .75 x 1.25
Thrust Collar
Pin-Groove .188 x 1.25
Key-Woodruff .188 x .875 x .38
Case, Gear-Large Bore-28" (Contains Items 3-6, 9-18, 20-25)
Screw-Tapping .375-16 x .50
Bolt-Round Head Square Neck .25-20 x 1.25 Grade 5
Seal 1.000 x 1.375
LS Case Half Left Hand Large Bore
Bushing-Flanged 1.00 x 1.12 x 1.50 x .495
Worm Shaft and and Gear Assembly
Locktite Gasket 518 850 cc Cartridge
LS Case Half Right Hand Large Bore
Nut-Locking-Flange .250-20
Screw-Tapping 10-24 x .75
Pin-Roll .188 x 1.50
Pin-Groove .313 x 1.44
Washer-Flat-Steel 1.007 x 1.542 x .062
Bushing-Flange .502 x 1 x .750
Rake Shaft 28"
Bolt-Round Head Square Neck .25-20 x 1.00
Washer-Fiber .437 x .656 x .032
Ariens 16 Oz. Bottle of L2 Lube (2 oz. capacity)
21
GEAR CASE-CAST IRON
Model 924120, 333, 334, 502, 503
2
1
3
31
1
5
30
4
7
9
11
6
9
8
12
29
10
13
14
15
8
19
27
11
28
26
26
18
17 16
27
25
20
23
21
22
19
13
24
PS0472
22
GEAR CASE-CAST IRON
Model 924120, 333, 334, 502, 503
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Part No.
Qty.
05801500 2
02476951 1
00643151 1
06600100 1
02437500 1
02406200 1
06601300 1
02401500 1
05606100 1
05404400 2
05404500 2
00200500 2
52400900 1
05707500 1
05607000 2
00113800 1
00403700 1
05947000 1
06307400 1
06437500 1
06600800 2
02472100 1
02459600 1
02406500 1
03519500 1
05803000 2
05946800 4
06306800 4
02401300 1
00200800 1
05505900 2
06408700 2
02406400 1
02400200 1
52408200 AR
00008000 1
Description
Pin-Roll .313 x 1.75
Impeller -1.00 I.D. x 14" O.D. (503)
Impeller -1.00 I.D. x 12" O.D. (120, 333, 334, 502)
Key-Woodruff .188 x .875 x .375
Worm Shaft-1.00” Diameter (503)
Worm Shaft-1.00” Diameter (120, 333, 334, 502)
Key-Square .188 x 1.0 x .188
Adjustment Plug
Seal 1.000 x 1.312 x .150
Bearing-Cup 1.78 x .475
Bearing-Cone .750 x .61
Bearing Spacer 1.12 x 1.52 x .5
Worm and Gear Service Assembly
Ring-Retaining-Internal 1.781 x .062
Seal 1.625 x 2.125 x .250
Pipe Plug
Dust Cap
Bolt-Hex .31-18 x .75 Grade 5
Washer-Lock .312 x .097
Washer-Flat-Steel .328 x 1.00 x .094
Key-Woodruff .25 x .875 x .375
Rake Shaft 24" 1.00 Diameter (120, 333)
Rake Shaft 28" 1.00 Diameter (334)
Rake Shaft 32" 1.00 Diameter (502)
Rake Shaft 36" 1.00 Diameter (503)
Pin-Roll .188 x 1.50
Bolt-Hex .25-20 x .75 Grade 5
Washer-Lock-External .262 x .502 x .026
Gear Case Cover
Gasket
Bushing-Flange 1.625 x 1.87 x 1.68 x 2.250
Washer-Flat-Steel 1.625 x 2.500 x .012
Gear Case Shaft
Gear Case
Case Set Large Bore
Ariens 16 oz. Bottle of L2 Lube (5 oz. capacity)
23
DISCHARGE CHUTE CRANK
Model 924119, 120, 333, 334
4
1
2
5
3
6
24
23
4
21
11
6
30
29
10
12
22
9
8
31
7
32
43
13
924120, 333, 334
14
34
36
38
28
39
15
16
17
35
18
37
33
924119
25
34
28
26
19
20
16
27
41
40
42
PS0603
24
DISCHARGE CHUTE CRANK
Model 924119, 120, 333, 334
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
Part No.
01019800
07508300
02480600
07412000
03223000
06714500
03222900
06224400
53204400
06436100
03220551
03224300
03220751
06439300
01123800
02480351
03219000
08320900
06436200
06529600
02488551
05947900
06435800
06529700
05947500
06308600
06437200
06435800
02479700
02470400
06308400
06533200
06215700
06529800
06437300
02480751
02480900
05946800
06308400
05947000
03233600
02480251
06219900
Qty.
1
1
1
4
1
3
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
2
2
2
2
2
2
2
1
1
1
1
2
2
4
1
4
4
4
2
2
1
1
Description
Cap, 3/8 Rod
Knob
Crank, Chute
Screw .25-20 x .50 Hex Washer Head Self Tapping
Cover, Gear
Pin-Spring Clip
Gear, Chute
Bolt-Round Head Square Neck .38-16 x 2.50 Grade 5
Pinion Gear w/Bracket (Contains Items 11-13)
Washer-Flat-Steel .63 x 1.005 x .062
Bracket, Gear
Push Nut
Gear Strap
Washer-Flat-Steel .38 x 1.50 x .062
Friction Washer
Bracket, Chute Support
Friction Plate
Spring-Compression .187 x .56 x 1.62
Washer-Flat-Steel .406 x .812 x .065
Nut-Locking-Center .38-16
Bracket, Chute Crank Support
Bolt-Hex .25-20 x .50 Grade 5
Washer-Flat-Steel .312 x .734 x .065
Nut-Locking-Center .25-20
Bolt-Hex .31-18X1.25 Grade 5 (119)
Washer-Locking .31 x .078 Regular (119)
Washer-Flat-Steel .344 x .688 x .065 (119)
Washer-Flat-Steel .312 x .734 x .065
Pin, Connector
Universal Joint
Washer-Locking .25 x .062
Nut-Hex .25-20
Bolt-Round Head Square Neck .31-18 x .75
Nut-Locking-Center .31-18
Washer-Flat-Steel .281 x .62 x .065 (120, 333, 334)
Bracket, Engine (120, 333, 334)
Spacer, Tube (120, 333, 334)
Bolt-Hex .25-20 x .75 Grade 5 (120, 333, 334)
Washer-Locking .25 x .062 x .065 (120, 333, 334)
Bolt-Hex .31-18 x .75 Grade 5 (119)
Spacer, Tube (119)
Bracket, Engine (119)
Bolt-Round Head Square Neck .25-20 x .75 Grade 5
25
ELECTRIC DISCHARGE CHUTE
Model 924502, 503
2
1
4
3
5
8
6
7
3
9
13
10
12
11
PS0860
26
ELECTRIC DISCHARGE CHUTE
Model 924502, 503
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
Part No.
02486959
06530100
07411900
02487100
05947400
02488251
02486300
06437300
02487000
02486800
07414400
06529700
02485159
Qty.
2
6
3
1
1
1
1
1
3
1
2
1
1
Description
Ring, Cover
Nut-Locking-Flange .250-20
Screw-Tapping 12-24 x .50 Hex Washer Head
Cover, Motor
Bolt-Hex .25-20 x 1.25 Grade 5
Bracket, Electric Motor
Motor, Electric Right Hand- Chute
Washer-Flat-Steel .281 x .62 x .065
Clamp, Chute
Gear, Chute
Screw-Tapping .31-18 x.75 Hex Washer Head
Nut-Locking-Center .25-20
Housing, Blower-32" E
27
BRUSH HEAD
Model 924504
20
33
20
4
15
31
9
23
32
34
25
23
36
20
2
19
18 19
23
25
3
23
23
30
24
35
28
23
7
11
7
14
1
12
10
13
10
8
27
12
14
5
21
12
16
26
22
6
29
23
24
37
23
17
8
PS0592
28
BRUSH HEAD
Model 924504
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
Qty.
01061300 1
01060900 1
02468300 1
05946800 2
05946900 4
05963700 2
05957900 2
05947000 16
06437300 2
06435800 8
06308400 2
06308600 20
06533200 2
06529200 20
02468400 1
02468500 2
07109400 2
02468600 1
06529600 2
02468700 5
02468800 2
00547800 2
02411300 8
05423400 2
05409700 2
01062900 1
02469000 1
02469100 1
02469200 2
02469300 1
02469400 1
02469500 1
02469600 1
02469700 1
02469800 1
02469900 1
02470000 1
Description
Chain Tightener
Sprocket
Chain, Assembly #40 x 106
Bolt-Hex .25-20 x .75 Grade 5
Bolt-Hex .31-18 x 1.00 Grade 5
Bolt-Hex .31-18 x 2.25 Grade 5
Bolt-Hex .38-16 x 1.50 Grade 5
Bolt-Hex .31-18 x .75 Grade 5
Washer-Flat-Steel .281 x .62 x .065
Washer-Flat-Steel .312 x .734 x .065
Washer-Lock .25 x .062 Regular
Washer-Lock .31 x .078 Regular
Nut-Hex .25-20
Nut-Hex .31-18
Pin, Spring Lok .187 x 1.25
Nut, Lok Stamped .31-18
Wheel, 5 inch Diameter
Spring, Tension .50 x 3.00
Nut-Locking-Center .38-16
Screw, Gear 10.9 M6 x 1-20
Lanyard .06 Cable 1.25 x 6
Pin, Hitch .38 x 2
Flange, Spherical 2 inch
Bearing 1.00 Bore, Spherical
Bearing-Ball .84 Hex x 52 MM x 1.07
Retainer Plate
Weldment, Core
Arm, Idler
Weldment, Caster Leg
Bushing .62 x 12 Gauge x .75
Shield, Chain
Shield Chain Top
Weldment, Head
Shield, Input
Weldment, Broom Frame
Shaft, Hex 20.5 w/Hole
Set, 24 Section
29
BRUSH DRIVE UNIT
Model 924504
21
6
1
23
2
8
21
7
3
4
17
5
10
2
9
12
36
32
26
35
4
10
2
31
34
24
3
10 46
32
28
27
1
25
11
15
14
30 33
13
15
16
20
22
19
18
29
14
42
41
40
44
43
37
39
38
41
45
PS0581
30
BRUSH DRIVE UNIT
Model 924504
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
05947500
02404800
06307200
02404900
02471751
02470900
00597000
02470151
02405051
06529800
06215700
02471851
06418500
05409700
02429600
02447600
06436800
02429100
02430600
05803000
05961100
01062000
06436200
06529600
02429451
07028500
07002600
05959400
05805600
06529600
02400400
06600300
05958000
02429800
06001100
01207800
02429551
06308800
06529400
50202100
06005500
07005300
06530400
07307000
07210800
06435700
Qty.
4
4
4
2
1
1
1
1
1
4
4
1
2
2
4
1
1
1
1
1
3
1
1
3
1
2
2
4
1
4
1
2
2
1
2
1
1
2
2
1
2
3
3
1
1
4
Description
Bolt-Hex .31-18 x 1.25 Grade 5
Retainer
Washer-Locking-Internal .313 x .030
Pivot, Center
Plate, Top Mount
T-Lock Handle
Washer-Cupped Serrated .38
Guard, Shaft
Frame, Adapter
Nut-Locking-Top .31-18
Bolt-Round Head Square Neck .31-18 x .75 Grade 5
Plate, Bottom Mount
Washer-Flat-Steel 1.015 x 1.500 x .125
Bearing, Ball
Flange, Bearing
Spacer 1.006 x 1.307 x .500
Washer-Flat-Steel .390 x .88 x .18
Shaft
Universal Joint
Pin-Roll .188 x 1.50
Bolt-Hex .38-16 x 3.25 Grade 5
Sprocket
Washer-Flat-Steel .406 x .812 x .065
Nut-Locking-Center .38-16
Plate, Mounting
Bolt, Hex Flanged Whizloc Head .38-16 x .75
Nut-Retainer .38-16
Bolt-Hex .38-16 x .75 Grade 5
Pin-Roll .188 x 1.75
Nut-Locking-Center .38-16
Gear Box Assembly
Key-Woodruff .188 x .75 x .313 SAE 9
Bolt-Hex .38-16 x 1.25 Grade 5
Sprocket
Screw-Set .25-20 x .25 Socket Head Cup Point
Chain
Plate, Stiffener
Washer-Lock .38 x .094
Nut-Hex .38-16
Hub Assembly
Screw-Set .31-18 x .38 Socket Head Cup Point
Bolt-Serrated Round Head Slotted .31-18 x .75
Nut-Locking-Flanged .31-18
Pulley-V 9.00 x 1.25
V-Belt
Washer-Flat-Steel .38 x .875 x .083
31
CONTINUITY DIAGRAM
Model 924333, 334
The diagrams below show the various states of connection for electrical components.
The solid lines on switches show continuity.
NOTE: All switches are viewed from the rear.
Key Switch
Hand Warmer Switch
(02739600)
(02485700)
S
G
S
G
R
B
A
M
OFF
R
B
A
M
S
G
RUN
R
M
B
A
START
HAND WARMER
OFF
HAND WARMER
ON
Solenoid (Top View)
(03679000)
NOT ENERGIZED
ENERGIZED
PS0661
32
WIRING DIAGRAM
Model 924333, 334
HEAD LIGHT
2
1
2
1
2
9
1
BLACK
BROWN/ORANGE
6
A.C. LIGHTING
ENGINE
BROWN/ORANGE
YELLOW
YELLOW
YELLOW
D.C. CHARGE
PURPLE
RED
3
HAND WARMER
SWITCH
MAGNETO
1
1
2
2
LEFT
HAND
WARMERS
1
RIGHT
2
WHITE / BLACK
1
2
M
STARTER
BLACK
4
3
G
RED
BLACK
A
BATTERY
RED
BLACK
B
RED
5
R
8
A
B
RED
FUSE
15 AMP
A
7
S
COIL 2
KEY
SWITCH
COIL 1
BROWN
STARTER
SOLENOID
BLACK
PS0672
Item Part No.
1
2
3
4
5
6
7
8
9
Qty.
08260800 AR
08261000 AR
02485900 AR
07532900 2
AR
03679000 1
02488900 1
52707300 1
00524700 1
02485700 1
Description
Engine, 10HP OHV Tecumseh- 12 Volt
Engine, 11HP OHV Tecumseh- 12 Volt
Headlight
Grips, Hot
Battery Recommend 340 to 350 CCA at 0° F. Size U1R or U1L
Solenoid
Wire Harness 12 Volt
Switch Assembly, Key
15 AMP Fuse
Switch, Hand Warmer
33
CONTINUITY DIAGRAM
Model 924502, 503
The diagrams below show the various states of connection for electrical components.
The solid lines on switches show continuity.
NOTE: All switches are viewed from the rear.
Key Switch
Hand Warmer Switch
(02739600)
(02485700)
S
G
R
B
A
M
S
G
OFF
R
B
A
M
S
G
RUN
R
M
B
A
START
HAND WARMER
OFF
Chute Motor Switch
Solenoid (Top View)
(02485600)
(03679000)
NOT ENERGIZED
HAND WARMER
ON
ENERGIZED
LEVER LEFT
CHUTE LEFT
LEVER RIGHT
CHUTE RIGHT
PS0841
34
WIRING DIAGRAM
Model 924502, 503
HEAD LIGHT
2
1
2
1
2
3
1
BROWN/ORANGE
A.C. LIGHTING
ENGINE
BROWN/ORANGE
YELLOW
6
YELLOW
YELLOW
11
HAND WARMER
SWITCH
BLACK
D.C. CHARGE
PURPLE
RED
MAGNETO
WHITE / BLACK
1
1
2
2
LEFT
HAND
WARMERS
1
1
2
2
RIGHT
M
STARTER
BLACK
4
RED
A
BATTERY
9
CHUTE MOTOR
SWITCH
BLACK
RED
3
G
PURPLE
2
1
CHUTE MOTOR
4
BLACK
B
RED
5
A
FUSE
15 AMP
R
8
5
3
BLACK/VIOLET
6
B
A
VIOLET
B
RED
A
BLACK
S
COIL 2
COIL 1
BROWN
10
KEY
SWITCH
7
STARTER
SOLENOID
BLACK
Item Part No.
1
PS0850
Qty.
08261100 AR
08261000 AR
2 02485900 AR
3 07532900 2
4
AR
5 03679000 1
6 02488700 1
7 52707300 1
8 00524700 1
9 02485600 1
10 02486300 1
11 02485700 1
Description
Engine, 13 HP OHV Tecumseh- 12 Volt
Engine, 11 HP OHV Tecumseh- 12 Volt
Headlight
Grips, Hot
Battery Recommend 340 to 350 CCA at 0° F. Size U1R or U1L
Solenoid
Wire Harness 12 Volt
Switch Assembly, Key
15 AMP Fuse
Switch, Chute Motor
Motor, Electric Right Hand- Chute
Switch, Hand Warmer
35
CONTINUITY AND WIRING DIAGRAMS
Model 924119, 120, 504
HEAD LIGHT
2
1
2
1
2
3
1
4
HAND WARMER
SWITCH
BLACK
A.C. LIGHTING
ENGINE
YELLOW
YELLOW
BROWN/ORANGE
BROWN/ORANGE
YELLOW
5
D.C. CHARGE
RED
1
1
2
2
LEFT
HAND
WARMERS
1
1
2
2
RIGHT
BLACK
PS0830
Item Part No.
1
2
3
4
5
Qty.
08262200
08260700
08261200
02485900
07532900
02488800
02485700
1
1
1
1
2
1
1
Description
Engine, 10HP L Head Tecumseh - 120 Volt (119)
Engine, 10HP OHV Tecumseh- 120 Volt (120)
Engine, 9HP Tecumseh OHV (504)
Headlight
Handle Hand Warmer with Terminal
Wire Harness-Hand Warmers and Light (119, 120, 504)
Switch, Hand Warmer
The diagrams below show the various states of connection for electrical components.
The solid lines on switches show continuity.
NOTE: All switches are viewed from the rear.
Hand Warmer Switch
(02485700)
HAND WARMER
OFF
HAND WARMER
ON
PS0820
36
Ariens Company
655 West Ryan Street
P.O. Box 157
Brillion, WI 54110-0157
920-756-2141
Fax 920-756-2407
www.ariens.com