Download Ariens SNO-THRO 924119 - 1028 User's Manual
Transcript
Sno-Thro ® Parts Manual Models 924119 -1028 924120 -1024 924333 -1024 924334 -1128 924502 -1332 924503 -1336 924504 - 936 02487800D 2/01 Supercedes 02487800, A,B,C Printed in USA THE MANUAL PRODUCT REGISTRATION Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance. For your safety and the safety of others always read, understand, and follow all DANGER, WARNING, and CAUTION messages found in manuals and on safety decals. A warranty registration card must be filled out, signed, and returned at time of purchase. This card activates the warranty. Claims meeting requirements during limited warranty period will be honored.. YOUR SATISFACTION IS IMPORTANT Questions? Please follow these helpful steps: 1. Refer to the manuals supplied with your unit. They will guide you through safe and proper operation and maintenance. They contain specifications on your unit. If your questions are not answered in these manuals, go to step number two. 2. Contact Your Dealer. Our dealers will be happy to supply any service or advice required to keep your unit operating at peak efficiency. A factory trained staff is available to support your equipment needs. They stock genuine Ariens parts and lubricants manufactured with the same precision and skill as the original. If your questions are not resolved by the support staff, ask for the manager or owner. When contacting your Dealer supply your model and serial numbers. Hardware descriptions are given in decimals. Decimals to Fractions .063 1/16 .563 9/16 .125 1/8 .625 5/8 .188 3/16 .688 11/16 .250 1/4 .750 3/4 .313 5/16 .813 13/16 .375 3/8 .875 7/8 .438 7/16 .938 15/16 .500 1/2 1.00 1 SERVICE AND REPLACEMENT PARTS When ordering replacement parts or making service inquiries, know the Model and Serial numbers of your unit and engine. Numbers are located on the product registration card in the unit literature package. They are printed on a serial number label, located on the frame of your unit. • Record Unit Model and Serial numbers here: TO SPEED PARTS ORDERING: 1. 2. 3. 4. • Record Engine Model and Serial numbers here: UNAUTHORIZED REPLACEMENT PARTS Use only Ariens replacement parts. The replacement of any part on this vehicle with anything other than an Ariens authorized replacement part may adversely affect the performance, durability, or safety of this unit and may void the warranty. disclaims liability for any claims or damages, whether warranty, property damage, personal injury or death arising out of the use of unauthorized replacement parts. 2 Know the model and serial numbers of your unit. Know the part number required. Know the quantity required. Know the part description. MODELS TABLE OF CONTENTS Domestic DECALS Model 924119 (1028) 10 H.P. 28” Sno-Thro Serial No. 000101 and up Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ENGINE AND DRIVE Model 924120 (1024) 10 H.P. 24” Sno-Thro Serial No. 000101 and up Engine and Belt Drive . . . . . . . . . . . . . . . . . . . . . . . . 6 MAIN FRAME International Speed Selector and Frame . . . . . . . . . . . . . . . . . . . . 8 Wheels and Axle . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Reduction Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Friction Wheel Drive . . . . . . . . . . . . . . . . . . . . . . . . . 13 Model 924333 (1024) 10 H.P. 24” Sno-Thro Serial No. 000101 and up OPERATORS CONTROLS Model 924334 (1128) 11 H.P. 28” Sno-Thro Serial No. 000101 and up Handlebar and Controls . . . . . . . . . . . . . . . . . . . . . . 14 Headlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Global BLOWER Model 924502 (1332) 13 H.P. 32” Sno-Thro Serial No. 000101 and up Auger and Battery . . . . . . . . . . . . . . . . . . . . . . . . . . Gear Case-Aluminum. . . . . . . . . . . . . . . . . . . . . . . . Gear Case-Cast Iron . . . . . . . . . . . . . . . . . . . . . . . . Discharge Chute Crank . . . . . . . . . . . . . . . . . . . . . . Electric Discharge Chute . . . . . . . . . . . . . . . . . . . . . Model 924503 (1336) 13 H.P. 36” Sno-Thro Serial No. 000101 and up 18 21 22 24 26 BRUSH Model 924504 (936) 9 H.P. 36” Sno-Brush Serial No. 000101 and up Brush Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Brush Drive Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 ELECTRICAL SYSTEMS Continuity Diagram (333, 334) . . . . . . . . . . . . . . . . . Wiring Diagram (333, 334) . . . . . . . . . . . . . . . . . . . . Continuity Diagram (502, 503) . . . . . . . . . . . . . . . . . Wiring Diagram (502, 503)) . . . . . . . . . . . . . . . . . . . Continuity & Wiring Diagrams (119, 120, 504) . . . . . 3 32 33 34 35 36 © Copyright 2000, 2001 Ariens Company DECALS Model 924119, 120, 333, 334, 502, 503 1 2 1028 08084300A 7 3 4 6 7 5 7 8 PS0414 Item Part No. 1 2 3 4 5 6 7 8 08085000 08084900 08085300 08085100 08084800 08084200 08084300 08084400 08084500 08084600 07746400 07733900 07797600 07751100 62447800 07864400 Qty. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Description Decal-Dash 1028 (119) Decal- 1024 Dash (120) Decal- 1024/1128 Dash (333, 334) Decal- 1332/1336 Dash (502, 503) Decal- 936 Dash (504) Decal- 1024 Front Panel (120, 333) Decal- 1028 Front Panel (119) Decal- 1128 Front Panel (334) Decal- 1332 Front Panel (502) Decal- 1336 Front Panel (503) Decal-Ariens Jewel Decal-Primer Decal- Cast Iron Bore Decal-A+ Decal-Set-Danger (119, 120, 333, 334, 502, 503) Decal-Differential Lock (120, 333, 334, 502, 503) 4 DECALS Model 924504 2 1 936 Power Brush CAUTION / PRUDENCE / CUIDADO Engage traction drive clutch before attachment clutch. Enclencher l'embrayage de traction avant l'embrayage de l'outil. Activar el embrague de la transmisión de dirección de la tracción antes del embrague del accesorio. 08084700A 08084800 CAUTION / PRUDENCE / CUIDADO Read the operator’s manual. Lire le manuel d’utilisation. Leer el manual del operador. 4 3 6 7 Adjust brush height before operating. Régler la hauteur du balai avant l’utilisation. Ajustar la altura de la escobilla antes de ponerla en funcionamiento. Engage traction drive clutch before attachment clutch. Enclencher l’embrayage de traction avant l’embrayage de l’outil. Activar el embrague de la transmisión de dirección del tractor antes del embrague del accesorio. Operating on irregular terrain could cause the brush to dig in and drive the machine rearward. Le balai risque de se planter dans le sol et d’entraîner la machine vers l’arrière lors d’utilisation sur terrain accidenté. El uso en terreno irregular puede hacer que la escobilla se entierre y hacer que la unidad se desplace hacia atrás. 07873100B 5 07797600 078644A 8 PS0870 Item Part No. 1 2 3 4 5 6 7 8 08084800 08084700 07746400 07733900 07797600 07751100 07873100 07864400 Qty. 1 1 1 1 1 1 1 1 Description Decal- 936 Dash Decal- 936 Front Panel Decal-Ariens Jewel Decal-Primer Decal- Cast Iron Bore Decal-A+ Decal, Caution Decal-Differential Lock 5 ENGINE AND BELT DRIVE Model 924119, 120, 333, 334, 502, 503, 504 51 49 48 3 43 50 5 1 11 6 54 55 2 8 11 46 47 12 7 10 4 56 9 53 15 14 17 44 23 13 19 30 29 8 28 5 26 18 5 22 31 32 21 27 22 33 34 25 37 35 20 26 16 24 5 39 52 23 36 38 40 45 Item 1 2 3 4 5 6 7 8 9 Part No. 06529800 06310500 08262200 08260700 08260800 08261000 08261100 08261200 02410900 06435700 06308600 05947300 06005500 02489100 02435700 Qty. 1 1 1 1 1 1 1 1 1 5 2 2 4 1 1 Description Nut-Locking-Center .31-18 Washer-Lock Internal .31 Engine, 10HP L Head Tecumseh - 120 Volt (119) Engine, 10HP OHV Tecumseh- 120 Volt (120) Engine, 10HP OHV Tecumseh- 12 Volt (333) Engine, 11HP Tecumseh OHV 12 Volt (334) Engine, 13HP Tecumseh 12 Volt (502, 503) Engine, 9HP Tecumseh OHV (504) Belt Finger Washer-Flat-Steel .38 x .875 x .083 Washer-Locking .31 x .078 Bolt-Hex .31-24 x .75 Grade 5 Screw-Set .31-18 x .38 Engine Sheave (119, 120, 333, 334, 502, 504) Engine Sheave (503) 6 41 42 PS0448 ENGINE AND BELT DRIVE Model 924119, 120, 333, 334, 502, 503, 504 Item 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 Part No. 06601800 07412000 02489000 07238500 07238400 07238300 07236200 07325700 07211200 07236100 07005300 07307000 02438900 05947900 06529700 02423651 06529800 05947500 02434851 01213100 02457400 06437200 01103100 02453751 06530300 01026000 06436500 06707000 08309400 05503700 02442800 08317200 07412100 02435300 06707400 02434751 02435400 02411000 06530400 07411600 06306800 06533200 02483100 21533500 07531800 07532000 05502100 07533200 06436700 06529200 06307400 Qty. 1 2 1 1 1 1 1 1 1 1 3 1 1 2 2 1 2 2 1 1 2 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 3 3 1 1 1 1 1 1 1 1 1 3 3 Description Key-Straight .25 x 1.75 x .25 Screw-Tap .25-20 x .50 Belt Cover V-Belt (119) V-Belt (120, 333, 334, 504) V-Belt (502) V-Belt (503) Pulley-V 8.40 x 1.0 with Key V-Belt -Traction Drive (119, 120, 333, 334, 504) V-Belt -Traction Drive (502, 503) Bolt-Serrated Round Head Slotted .31-18 x .75 (503) Pulley-V 9.0 x 1.25 Hub (119, 120, 333, 334, 502, 503)) Bolt-Hex .25-20 x .50 Grade 5 (120, 333, 334, 502, 503, 504) Nut-Locking-Center .25-20 (120, 333, 334, 502, 503, 504) Belt Retainer (120, 333, 334, 502, 503, 504) Nut-Locking Center .31-18 Bolt-Hex .31-18 x 1.25 Grade 5 Idler Arm Bearing Spacer Idler Washer-Flat-Steel .344 x .688 x .065 Spacer Idler Arm Nut-Locking-Nylon .625-18 Wave Washer Washer-Flat-Steel .382 x .812 x .023 Pin-Cotter .09 x 1.00 Spring-Tension .80 x .73 x 3.06 Bushing-Flange-Nylon .500 x .625 x .312 x .750 Activating Shaft Spring-Tens .047 x .44 x 3.37 Screw-Tapping 10-24 x .375 Return Clip Pin-Cotter .09 x .50 Bracket Pin-Clevis Belt Finger Nut-Locking-Flange .312-18 (503) Screw-Tap .25-20 x .37 Washer-Lock-External .262 x .502 x .026 (503) Nut-Hex .25-20 (503) Cord-Extension-110V (119, 120) Plug-Spark Fuel Cap Key, Push/Pull-Tecumseh (119, 120) Bushing-Flange .500 x.625 x.500 x.750 Boot, Eyelet Terminal(333, 334, 502, 503) Washer-Flat-Steel .323 x .625 x .062 Nut-Hex .312-18 Washer-Locking .312 x .097 Heavy 7 SPEED SELECTOR AND FRAME Model 924119, 120, 333, 334, 502, 503, 504 1 2 3 4 5 6 7 8 9 10 11 14 12 30 31 13 15 16 28 18 27 17 23 20 7 21 26 22 29 19 24 25 24 PS0485 8 SPEED SELECTOR AND FRAME Model 924119, 120, 333, 334, 502, 503, 504 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Part No. 07516700 05708600 07509600 02444851 08318400 05947700 06529800 02462600 06529700 05948000 06713500 02487600 02487700 02477900 06706900 06436500 01215100 02476300 02485359 02401800 02483500 05531500 05947500 07411600 07411500 02477159 06437200 06441900 06707300 07028500 06219800 06537500 Qty. 1 2 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 2 2 1 1 2 4 1 1 1 1 2 2 2 Description Hole Plug Ring-Retainer-External .500 x .015 Knob Rod Spring, Tension .055 x .33 x 1.31 Bolt-Hex .25-20 x 1.00 Nut-Locking-Center .312-18 Pivot Nut-Locking-Center .25-20 Bolt-Hex .31-18 x 3.50 Pin-Hair Internal .08 x .18 x 1.18 Rod, Shift-Upper Rod, Shift-Lower Pivot, Rod Pin-Cotter .09 x .75 Washer-Flat-Steel .382 x .812 x .023 Clevis Pin .370/.375 x .688 Arm, Shift Main Frame Bolt Strap (119, 120, 333, 334, 504) Bolt Strap (502, 503) Bushing-Sleeve .328 x .50 x .75 Bolt-Hex .31-18 x 1.25 Grade 5 Screw-Tapping .250-20 x .37 Hex Washer Head Screw-Tapping .31-18 x .50 Hex Washer Head Cover, Bottom Washer-Flat-Steel .344 x .688 x .065 Washer-Flat-Steel .531 x 1.06 x .095 Pin-Cotter .12 x .75 Bolt-Hex Flanged Whiz Lock Head .38-16 x .75 Bolt-Round Head Square Neck .25-20 x 1.00 Grade 5 Nut-Locking Wing .25-20 9 WHEELS AND AXLE Model 924119 1 12 3 13 8 14 10 2 8 11 7 9 6 5 33 10 8 4 11 13 PS0800 9 8 Model 924120, 333, 334, 502, 503, 504 18 16 27 19 3 14 23 28 22 21 29 20 15 31 30 26 25 35 37 32 24 36 34 17 38 39 33 PS0790 10 WHEELS AND AXLE Model 924119, 120, 333, 334, 502, 503, 504 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 Part No. Qty. 07150300 2 07150500 2 07121800 2 07121600 2 02483200 1 05718400 1 02439600 1 06600800 1 06436900 4 00301700 2 05409300 2 01014200 2 07053700 2 06529700 6 07103700 2 07108700 2 07107600 2 07107700 2 07121900 2 07121700 2 02437151 1 02440951 1 52405400 AR 52405500 AR 02437051 1 02441051 1 05505700 1 06307000 1 07012600 1 05502900 1 52405900 1 01037400 1 08300700 1 01037200 1 05948100 1 06530900 1 05803200 1 01037500 1 52405300 1 05803000 1 07412200 8 02457859 2 05417700 2 06437400 2 07028600 8 06530100 8 Description Tire/Wheel Assembly 16 x 6.50 - 8 (119) Wheel 6.50 x 8.00 (119) Tire 4.80-8 (120, 333) Tire 16 x 6.50-8 (119, 334, 502, 503, 504) Shaft, Axle (119) Ring, Retaining .875 x .050 (119) Spur Gear (119) Woodruff Key .25 x .875 x .375 (119) Washer-Flat-Steel .88 x 1.25 x .062 (119) Bearing Flange (119) Bearing, Ball .88 x 1.75 x .50 (119) Flange, Bearing (119) Pin-Lock .31 x 1.75 (119) Nut-Locking-Center .25-20 (119) Tube 4.00 x 8 (120, 333) Tube 6.50 x 8 (119, 334, 502, 503, 504) Wheel 4.80-8 (120, 333) Wheel 6.50-8 (334, 502, 503, 504) Tire/Wheel Assembly #34-4.80/4.00 x 8 (120, 333) Tire/Wheel Assembly #35-16 x 6.50 (334, 502, 503, 504) Axle-Right Hand (502, 503) Axle-Right Hand (120, 333, 334, 504) Axle Assembly-Left Hand (Contains Items 19-23) (502, 503) Axle Assembly-Left Hand (Contains Items 19-23) (120, 333, 334, 504) Axle-Left Hand (502, 503) Axle-Left Hand (120, 333, 334, 504) Bushing-Sleeve .750 x .814 x .750 (120, 333, 334, 502, 503, 504) Washer-Locking .250 x .047 (120, 333, 334, 502, 503, 504) Fitting-Lube .25-28 x .256 (120, 333, 334, 502, 503, 504) Bushing-Sleeve .562 x .625 x .625 (120, 333, 334, 502, 503, 504) Lockout Hub Assembly (Contains Items 25-27, 30, 31) (120, 333, 334, 502, 503, 504) Pin (120, 333, 334, 502, 503, 504) Spring-Compression .028 x.34 x 1.062 (120, 333, 334, 502, 503, 504) Lockout Hub (120, 333, 334, 502, 503, 504) Screw-Cap .25-20 x 2.00 Grade 8 (120, 333, 334, 502, 503, 504) Nut-Jam-Nylon .250-20 (120, 333, 334, 502, 503, 504) Pin-Roll .093 x 1.00 (120, 333, 334, 502, 503, 504) Knob (120, 333, 334, 502, 503, 504) Differential Assembly (120, 333, 334, 502, 503, 504) Pin Roll .188 x 1.50 Screw-Tap .50-20 x .62 Hex Head (120, 333, 334, 502, 503, 504) Bearing Retainer (120, 333, 334, 502, 503, 504) Bearing-Ball 1.13 x 2.19 x .63 (120, 333, 334, 502, 503, 504) Washer-Flat-Steel 1.140 x 1.718 x .134 Bolt Serrated Neck Slotted .25-20 x .50 Nut-Locking-Flange .250-20 11 REDUCTION DRIVE Model 924119, 120, 333, 334, 502, 503, 504 6 5 7 10 4 9 8 3 11 17 2 2 12 16 23 13 14 22 1 22 14 24 15 21 19 14 20 18 PS0463 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Part No. 02477300 06437200 02476800 05531600 06436600 00308500 05435200 02414100 06530600 06536400 05718300 07530500 06529800 06436100 02436700 02477700 07029700 05802900 05800900 52403200 02436800 05502600 06435700 06536100 Qty. 1 2 1 1 1 1 1 1 4 1 1 1 1 6 1 1 1 1 1 1 1 2 2 1 Description Hex Shaft Washer-Flat-Steel .344 x .688 x .065 Hex Shaft Spacer .450 x .75 x 1.60 Washer-Flat-Steel .505 x .880 x .072 Bearing Flange Bearing-Ball .437 x 1.375 x .437 Bearing Flange Nut-Locking Dual Face 10-24 Nut-Locking-Center .438-14 Ring-Retaining External .31 x .025 Idler Nut-Locking-Center .31-18 Washer-Flat-Steel .630 x 1.005 x .062 Pinion Shaft Roller Chain #41-34 Pitches Drive Fitting-Hydraulic Pin Roll .156 x 1.00 Pin, Roll .125 x 1.00 Pinion and Sprocket Assembly (Contains Items 21, 22) Pinion and Sprocket Bushing-Flange .625 x .750 x .50 x .875 Washer-Flat-Steel .38 x .875 x .083 Nut, Jam .31-18 12 FRICTION WHEEL DRIVE Model 924119, 120, 333, 334, 502, 503, 504 13 12 7 14 11 7 3 9 5 8 2 6 10 16 4 18 19 24 1 20 22 15 17 25 23 1 21 26 20 PS0452 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Part No. Qty. 07411500 8 02445500 1 00300300 1 02445400 1 05702100 1 06436900 1 05502600 2 05512600 1 06530500 1 05409300 1 02444500 1 52404600 AR 02477000 1 05802900 2 01054600 1 02407100 1 02407600 1 06600600 1 02458200 1 05435100 2 02415500 1 00303400 1 06437200 1 06308600 1 05946900 1 02458100 1 Description Screw-Tapping .312-18 x .50 Spindle Hub Friction Disc Disc Hub Ring-Retaining-Internal 1.750 x .062 Washer-Flat-Steel .880 x 1.250 x .062 Bushing-Flange .625 x .750 x .500 x .875 Bushing-Sleeve .882 x 1.250 x .531 Nut-Locking-Nylon .875-14 Bearing-Ball .88 x 1.75 x .50 Carrier Friction Wheel Assembly (Contains 1-11) Carrier Shaft Pin-Roll .156 x 1.00 Drive Plate Drive Disc Spacer 1.3 x .76 x .19 Spindle Key-Woodruff .125 x .50 x .203 Housing Mount Bearing .625 x 1.375 x .43 Bearing Spacer Roller Washer-Flat-Steel .344 x .688 x .065 Washer-Lock .31 x .078 Bolt-Hex .31-18 x 1.00 Grade 5 Spindle Housing 13 HANDLEBARS AND CONTROLS Model 924119, 120, 333, 334, 502, 503, 504 2 8 25 7 1 9 4 31 22 10 23 21 81 74 68 11 84 84 11 77 46 76 13 58 4 59 17 19 56 29 83 79 80 14 12 30 82 78 12 57 75 4 48 72 21 20 3 73 24 5 15 54 71 5 81 25 53 16 28 18 67 26 60 64 11 61 63 6 12 65 66 62 27 34 37 51 32 69 50 38 33 41 39 36 55 35 70 49 42 43 40 48 47 52 45 44 PS0812 14 HANDLEBARS AND CONTROLS Model 924119, 120, 333, 334, 502, 503, 504 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 Part No. Qty. Description 53209400 53209500 02487300 06529700 02464700 07511200 02462100 07411800 07511800 02486451 06707400 06437300 02476500 02476700 08335400 02463400 05516100 05946800 08310900 06530800 05803300 05800900 02463000 06436700 05516200 06945300 06306900 06517300 07517700 02460700 05952500 52413700 52413800 52413900 52414100 52416000 52414000 52416100 06945200 52707300 02488800 02488900 02488700 01054200 02408600 06005500 02213500 02422851 06707400 1 1 1 2 2 1 2 4 2 1 2 2 1 1 2 1 1 1 1 2 2 1 1 2 4 1 1 1 1 1 2 AR AR AR AR AR AR AR 1 1 1 1 1 1 1 1 1 1 1 Handlebar, Upper Right Hand (Includes Hand Warmer) Handlebar, Upper Left Hand (Includes Hand Warmer) Handlebar, Lower Nut-Lock-Center .25-20 Handle Pivot Bushing-Snap (119, 120, 333, 334) Lever-Clutch-Coated Screw-Tapping 12-14 x 1.50 Bumper Bracket, Cable Support (119, 502, 503) Pin, Cotter .09 x .50 Washer-Flat-Steel .281 x .62 x .065 Right Hand Lever Left Hand Lever Spring-Tension .051 x .50 x 4.87 Arm-Latch Bushing-Flange .265 x .437 x .339 x .62 Bolt-Hex .25-20 x .75 Spring-Tension .048 x .44 x 1.75 Nut-Crown .312-18 Pin Roll .156 x .75 Pin-Roll .125 x 1.00 Rod Washer-Flat-Steel .323 x .625 x .062 Bushing-Flange .325 x .465 x .333 x .685 Cable, Traction Clutch (119, 502, 503) Washer-Locking-Internal .625 x .045 (333, 334, 502, 503) Nut-Panel .625-32 (333,334, 502, 503) Cap-Ignition Switch (333,334, 502, 503) Key-With Cap (333,334, 502, 503) Bolt-Hex .25-20 x 1.50 Grade 5 Panel with Decal (504) Panel with Decal (120) Panel with Decal (119) Panel with Decal (333) Panel with Decal (334) Panel with Decal (502) Panel with Decal (503) Cable, Blower Clutch Switch Assembly (Contains 29-31) (333, 334, 502,503) Wire Harness-Hand Warmers and Light (119, 120, 504) Wire Harness 12 Volt (333, 334) Harness, Wire (502, 503) Adapter Spacer Spacer 1.0 x .64 x .38 Screw-Set .32-18 x .38 Rod Adapter Clutch Engagement Yoke Pin-Cotter .09 x .50 15 HANDLEBARS AND CONTROLS Model 924119, 120, 333, 334, 502, 503, 504 Item 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 Part No. 06707000 02406900 08309400 02427200 06307400 52404700 06529800 05947000 02422700 06530200 02485551 06426600 05947900 05802600 02485700 06403800 06403800 07516700 07508300 01123800 02463900 08320900 06529600 06436200 02463100 02486500 05711300 06221600 06436100 07517300 06530400 06212300 06220200 06446800 07531700 06439400 02485600 05947700 06530100 02489900 06436600 07028500 06909400 06310900 06310900 Qty. 2 1 1 1 4 1 3 1 1 1 1 1 1 1 1 1 2 1 1 2 1 1 1 1 1 1 2 4 1 2 4 2 2 4 4 4 1 1 1 1 6 4 1 1 2 Description Pin-Cotter .09 x 1.00 Fork Pivot Rod Spring-Tension .080 x .73 x 3.06 Clutch Fork Washer-Locking .312 x .097 Heavy Spring Assembly Nut-Locking-Center .31-18 Bolt-Hex .31-18 x .75 Grade 5 Adapter Nut-Locking-Nylon .312-18 Lever, Clutch Washer-Flat-Steel .281 x 1.00 x .063 Bolt-Hex .25-20 x .50 Pin-Roll .156 x .88 Switch, Hand Warmer Washer-Flat-Steel .505 x .875 x .024 (119, 120, 333, 334, 504) Washer-Flat-Steel .505 x .875 x .024 (502, 503) Hole Plug (119, 502, 503) Knob (119, 502, 503) Friction Washer (119, 502, 503) Pressure Flange (119, 502, 503) Spring-Compression .187 x .56 x 1.62 (119, 502, 503) Nut-Locking .375-16 (119, 502, 503) Washer-Flat-Steel .406 x .812 x .065 (119, 502, 503) Spacer (119, 502, 503) Lever-Deflector (119, 502, 503) Ring-Retaining External .375 x .010 (119, 502, 503) Bolt-Round Head Square Neck .31-18 x 2.25 Grade 5 Washer-Flat-Steel .630 x 1.005 x .062 Cable Tie 5.5" Nut-Locking-Flange .312-18 Bolt-Round Head Square Neck .31-18 x 2.75 Bolt-Round Head Square Neck .31-18 x 1.75 Washer, Saddle-.320 x .937 x .062 Knob- Wing .312-18 Washer-Flat-Steel .328 x .875 x .062 Switch, Chute Rotation (502, 503) Bolt-Hex .25-20 x 1.00 Grade 5 Nut-Locking-Flange .250-20 Spacer .265 x .355 x .312 Washer-Flat-Steel .505 x .880 x .072 Bolt-Hex Flanged Whiz Lock Head .38-16 x .75 J-Clamp Washer-Locking-Internal .563 x .040(119, 120, 333, 334, 504) Washer-Locking-Internal .563 x .040 (502, 503) 16 HEADLIGHT Model 924119, 120, 333, 334, 502, 503, 504 6 2 7 2 8 3 4 1 9 5 10 PS0422 tem 1 2 3 4 5 6 7 8 9 10 Part No. Qty. 02485900 AR 06307200 2 06216100 1 05952600 1 06529200 1 02464900 1 02465000 1 06530400 1 06307400 1 07517300 2 Description Headlight (Contains 2-9) Washer-Lock-External .313 x .030 Bolt-Round Head Square Neck .312-18 x 1.00 Bolt-Hex .31-18 x 2.50 Grade 2 Nut-Hex .312-18 Lens Bulb Nut-Flange .312-18 Washer-Lock .312 Cable Tie 17 AUGER AND BATTERY Model 924119, 120, 333, 334, 502, 503 15 56 17 12 54 55 17 15 58 59 14 60 18 16 30 43 22 6 5 20 7 1 45 46 8 51 36 53 48 47 52 49 21 13 22 36 11 50 2 57 62 36 44 42 37 3 32 34 38 30 29 24 26 25 33 40 19 13 31 10 10 4 41 27 39 9 25 23 35 28 PS0437 18 AUGER AND BATTERY Model 924119, 120, 333, 334, 502, 503 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Part No. Qty. Description 09032300 1 A/R 1 1 2 6 2 2 1 4 10 1 1 4 1 2 1 2 1 2 1 1 1 1 1 1 2 2 4 5 5 7 6 1 1 1 1 1 7 9 8 4 1 1 1 1 1 1 1 1 1 1 Cover, Battery (333, 334, 502, 503) Battery Recommend 340 to 350 CCA at 0° F. Size U1R or U1L (333, 334, 502, 503) Battery Tray (503) Battery Tray (333, 334, 502) Bolt-Round Head Square Neck .25-20 x 7.00 (333, 334, 502, 503) Washer-Flat-Steel .281 x .62 x .065 (333, 334, 502, 503) Wing Nut-Locking .25-20 (333, 334, 502, 503) Washer-Flat-Steel .406 x .812 x .065 (333, 334, 502, 503) Solenoid (333, 334, 502, 503) Bolt-Hex .25-20 x .75 Grade 5 (333, 334, 502, 503) Nut-Lock-Flange .25-20 Cover, Solenoid (333, 334, 502, 503) Rod, Chute (119, 502, 503) Washer-Flat-Steel .438 x 1.00 x .083 Spring, Compression (119, 502, 503) Washer-Flat-Steel .281 x .62 x .065 (119, 502, 503) Wave Washer (120, 333, 334) Ring, Retaining-External .218 x .035 (119, 502, 503) Washer-Plastic .390 x .875 x .062 (120, 333, 334) Screw-Tapping .25-20 x .50 Hex Washer Head (333, 334, 502, 503) Blower Housing w/Decal 28" (119) Blower Housing w/Decal 24" (120) Blower Housing w/Decal 24" (333) Blower Housing w/Decal 28" (334) Blower Housing w/Decal 32" (502) Blower Housing w/Decal 36" (503) Runner, Skid Shoe-1/2" Flange (120, 333, 334, 502, 503) Runner, Double Flange (119) Nut-Locking .375-16 (119, 502, 503) Nut-Locking .375-16 (120, 333, 334) Washer-Flat-Steel .38 x .875 x .083 (119, 120, 333, 334) Washer-Flat-Steel .38 x .875 x .083 (502) Washer-Flat-Steel .38 x .875 x .083 (503) Scraper Blade 28" (119) Scraper Blade 24" (120, 333) Scraper Blade 28" (334) Scraper Blade 32" (502) Scraper Blade 36" (503) Nut-Locking-Center .31-18 (119, 120, 333, 334) Nut-Locking-Center .31-18 (502) Nut-Locking-Center .31-18 (503) Fitting-Lube .25-28 x .256 Rake, Left Hand - 28" (16" O.D.) (334) Rake, Right Hand - 28" (16" O.D.) (334) Rake, Right Hand - 24" (16" O.D.) (120, 333) Rake, Left Hand - 24" (16" O.D.) (120, 333) Rake, Left Hand - 28" (15" O.D.) (119) Rake, Right Hand - 28" (15" O.D.) (119) Rake, Left Hand - 32" (16" O.D.) (502) Rake, Right Hand - 32" (16" O.D.) (502) Rake, Left Hand - 36" (16" O.D.) (503) Rake, Right Hand - 36" (16" O.D.) (503) 02484559 02488659 06220400 06437300 06537500 06436200 03679000 05946800 06530100 02484459 02479800 06435900 08335200 06437300 01320200 05718500 06416800 07412000 52414200 52414300 52414400 52414500 52414600 52414700 02483059 02483859 06529600 06529600 06435700 06435700 06435700 02479159 01016400 00620159 00620859 03519259 06529800 06529800 06529800 07012600 52410700 52410800 52413600 52413500 52411800 52411900 52412200 52412300 52412500 52412600 19 AUGER AND BATTERY Model 924119, 120, 333, 334, 502, 503 Item Part No. 28 51001500 29 00301700 03086200 30 06211800 06211800 31 06212000 32 05418200 05406300 33 07028600 34 06212200 06212200 06212200 35 06436300 36 06529700 37 02437451 38 05503500 39 06436400 40 06306600 41 05947100 42 08316400 43 06441100 44 02440551 45 02448100 46 06707500 47 05946800 48 52404800 49 02217800 50 06806700 51 07028500 52 07002600 53 01014200 03086100 54 06437200 55 06945400 56 52411000 57 05947900 58 06908200 59 05959400 60 52410900 61 06308400 62 07533200 Qty. 2 1 1 2 3 3 1 1 6 5 7 6 2 6 2 2 2 2 2 1 1 1 1 1 1 1 1 2 2 2 1 1 1 1 1 2 1 1 1 2 2 Description Shear Bolt Service Assembly (Includes Item 25) Bearing Flange (119,120, 333, 334, 502) Bearing Flange (503) Bolt-Round Head Square Neck .38-16 x .75 (119, 502, 503) Bolt-Round Head Square Neck .38-16 x .75 (120, 333, 334) Bolt-Round Head Square Neck .38-16 x 1.00 Bearing-Ball 1.0 x 2.0 x .56 (503) Bearing-Ball .750 x 1.750 x .50 (119, 120, 333, 334, 502) Bolt-Serrated-Neck-Slotted .25-20 x .50 Bolt-Round Head Square Neck .312-18 x .62 (119, 120, 333, 334, 502) Bolt-Round Head Square Neck .312-18 x .62 (502) Bolt-Round Head Square Neck .312-18 x .62 (503) Washer-Flat Steel 1.010 x 1.505 x .062 Nut-Locking-Center .25-20 Bearing Support Bushing-Flange 1.000 x 1.12 x .62 x 1.50 Washer-Flat-Steel .511 x 1.441 x .125 Washer-Lock .500 x .151 Bolt-Hex .50-13 x 1.00 Grade 5 Spring-Tension .062 x .56 x 8.0 Washer-Flat-Steel .52 x .827 x .062 (120, 333, 334) Arm Extension (119) Clevis Pin Pin-Cotter .06 x .75 Bolt-Hex .25-20 x .75 (119) Brake Arm Assembly (Contains Items 49, 50) Brake Lining Rivet-Tubular .187 x .437 Bolt-Hex Flanged Whizloc Head .38-16 x .75 Nut-Retainer .38-16 Bearing Flange (119, 120, 333, 334, 502) Bearing Flange (503) Washer-Flat-Steel .344 x .688 x .065 (119, 502, 503) Cable, Control (119, 502, 503) Chute, Discharge with Remote (119, 502, 503) Bolt-Hex .25-20 x .50 Grade 5 Clamp-Cushioned (119, 502, 503) Bolt-Hex .38-16 x .75 (119, 502, 503) Chute, Discharge without Remote (120, 333, 334) Washer-Locking .25 x.062 Regular Boot, Eyelet Terminal (333, 334, 502, 503) 20 GEAR CASE-ALUMINUM Model 924119 8 2 4 5 7 3 14 10 12 11 24 6 1 13 15 13 26 16 11 17 25 14 21 21 9 22 18 19 23 17 20 19 PS0692 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Part No. Qty. 05803700 2 02477251 1 05618900 1 05511200 1 03210300 1 05804500 1 06600100 1 52413400 AR 07412900 1 06219700 2 05618800 2 02470600 1 05530100 2 52402600 1 00925700 1 02470700 1 06530100 4 07413000 2 05803000 2 05806900 1 06416600 2 05520600 1 02479300 1 06219800 2 06442500 1 00008000 1 Description Pin-Roll .250 x 1.75 Impeller-.75 I.D.x 12" O.D. Seal, Oil .750 x 1.375 x .312 Bushing-Flange .75 x 1.00 x .75 x 1.25 Thrust Collar Pin-Groove .188 x 1.25 Key-Woodruff .188 x .875 x .38 Case, Gear-Large Bore-28" (Contains Items 3-6, 9-18, 20-25) Screw-Tapping .375-16 x .50 Bolt-Round Head Square Neck .25-20 x 1.25 Grade 5 Seal 1.000 x 1.375 LS Case Half Left Hand Large Bore Bushing-Flanged 1.00 x 1.12 x 1.50 x .495 Worm Shaft and and Gear Assembly Locktite Gasket 518 850 cc Cartridge LS Case Half Right Hand Large Bore Nut-Locking-Flange .250-20 Screw-Tapping 10-24 x .75 Pin-Roll .188 x 1.50 Pin-Groove .313 x 1.44 Washer-Flat-Steel 1.007 x 1.542 x .062 Bushing-Flange .502 x 1 x .750 Rake Shaft 28" Bolt-Round Head Square Neck .25-20 x 1.00 Washer-Fiber .437 x .656 x .032 Ariens 16 Oz. Bottle of L2 Lube (2 oz. capacity) 21 GEAR CASE-CAST IRON Model 924120, 333, 334, 502, 503 2 1 3 31 1 5 30 4 7 9 11 6 9 8 12 29 10 13 14 15 8 19 27 11 28 26 26 18 17 16 27 25 20 23 21 22 19 13 24 PS0472 22 GEAR CASE-CAST IRON Model 924120, 333, 334, 502, 503 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Part No. Qty. 05801500 2 02476951 1 00643151 1 06600100 1 02437500 1 02406200 1 06601300 1 02401500 1 05606100 1 05404400 2 05404500 2 00200500 2 52400900 1 05707500 1 05607000 2 00113800 1 00403700 1 05947000 1 06307400 1 06437500 1 06600800 2 02472100 1 02459600 1 02406500 1 03519500 1 05803000 2 05946800 4 06306800 4 02401300 1 00200800 1 05505900 2 06408700 2 02406400 1 02400200 1 52408200 AR 00008000 1 Description Pin-Roll .313 x 1.75 Impeller -1.00 I.D. x 14" O.D. (503) Impeller -1.00 I.D. x 12" O.D. (120, 333, 334, 502) Key-Woodruff .188 x .875 x .375 Worm Shaft-1.00” Diameter (503) Worm Shaft-1.00” Diameter (120, 333, 334, 502) Key-Square .188 x 1.0 x .188 Adjustment Plug Seal 1.000 x 1.312 x .150 Bearing-Cup 1.78 x .475 Bearing-Cone .750 x .61 Bearing Spacer 1.12 x 1.52 x .5 Worm and Gear Service Assembly Ring-Retaining-Internal 1.781 x .062 Seal 1.625 x 2.125 x .250 Pipe Plug Dust Cap Bolt-Hex .31-18 x .75 Grade 5 Washer-Lock .312 x .097 Washer-Flat-Steel .328 x 1.00 x .094 Key-Woodruff .25 x .875 x .375 Rake Shaft 24" 1.00 Diameter (120, 333) Rake Shaft 28" 1.00 Diameter (334) Rake Shaft 32" 1.00 Diameter (502) Rake Shaft 36" 1.00 Diameter (503) Pin-Roll .188 x 1.50 Bolt-Hex .25-20 x .75 Grade 5 Washer-Lock-External .262 x .502 x .026 Gear Case Cover Gasket Bushing-Flange 1.625 x 1.87 x 1.68 x 2.250 Washer-Flat-Steel 1.625 x 2.500 x .012 Gear Case Shaft Gear Case Case Set Large Bore Ariens 16 oz. Bottle of L2 Lube (5 oz. capacity) 23 DISCHARGE CHUTE CRANK Model 924119, 120, 333, 334 4 1 2 5 3 6 24 23 4 21 11 6 30 29 10 12 22 9 8 31 7 32 43 13 924120, 333, 334 14 34 36 38 28 39 15 16 17 35 18 37 33 924119 25 34 28 26 19 20 16 27 41 40 42 PS0603 24 DISCHARGE CHUTE CRANK Model 924119, 120, 333, 334 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 Part No. 01019800 07508300 02480600 07412000 03223000 06714500 03222900 06224400 53204400 06436100 03220551 03224300 03220751 06439300 01123800 02480351 03219000 08320900 06436200 06529600 02488551 05947900 06435800 06529700 05947500 06308600 06437200 06435800 02479700 02470400 06308400 06533200 06215700 06529800 06437300 02480751 02480900 05946800 06308400 05947000 03233600 02480251 06219900 Qty. 1 1 1 4 1 3 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 2 2 2 2 2 2 2 1 1 1 1 2 2 4 1 4 4 4 2 2 1 1 Description Cap, 3/8 Rod Knob Crank, Chute Screw .25-20 x .50 Hex Washer Head Self Tapping Cover, Gear Pin-Spring Clip Gear, Chute Bolt-Round Head Square Neck .38-16 x 2.50 Grade 5 Pinion Gear w/Bracket (Contains Items 11-13) Washer-Flat-Steel .63 x 1.005 x .062 Bracket, Gear Push Nut Gear Strap Washer-Flat-Steel .38 x 1.50 x .062 Friction Washer Bracket, Chute Support Friction Plate Spring-Compression .187 x .56 x 1.62 Washer-Flat-Steel .406 x .812 x .065 Nut-Locking-Center .38-16 Bracket, Chute Crank Support Bolt-Hex .25-20 x .50 Grade 5 Washer-Flat-Steel .312 x .734 x .065 Nut-Locking-Center .25-20 Bolt-Hex .31-18X1.25 Grade 5 (119) Washer-Locking .31 x .078 Regular (119) Washer-Flat-Steel .344 x .688 x .065 (119) Washer-Flat-Steel .312 x .734 x .065 Pin, Connector Universal Joint Washer-Locking .25 x .062 Nut-Hex .25-20 Bolt-Round Head Square Neck .31-18 x .75 Nut-Locking-Center .31-18 Washer-Flat-Steel .281 x .62 x .065 (120, 333, 334) Bracket, Engine (120, 333, 334) Spacer, Tube (120, 333, 334) Bolt-Hex .25-20 x .75 Grade 5 (120, 333, 334) Washer-Locking .25 x .062 x .065 (120, 333, 334) Bolt-Hex .31-18 x .75 Grade 5 (119) Spacer, Tube (119) Bracket, Engine (119) Bolt-Round Head Square Neck .25-20 x .75 Grade 5 25 ELECTRIC DISCHARGE CHUTE Model 924502, 503 2 1 4 3 5 8 6 7 3 9 13 10 12 11 PS0860 26 ELECTRIC DISCHARGE CHUTE Model 924502, 503 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 Part No. 02486959 06530100 07411900 02487100 05947400 02488251 02486300 06437300 02487000 02486800 07414400 06529700 02485159 Qty. 2 6 3 1 1 1 1 1 3 1 2 1 1 Description Ring, Cover Nut-Locking-Flange .250-20 Screw-Tapping 12-24 x .50 Hex Washer Head Cover, Motor Bolt-Hex .25-20 x 1.25 Grade 5 Bracket, Electric Motor Motor, Electric Right Hand- Chute Washer-Flat-Steel .281 x .62 x .065 Clamp, Chute Gear, Chute Screw-Tapping .31-18 x.75 Hex Washer Head Nut-Locking-Center .25-20 Housing, Blower-32" E 27 BRUSH HEAD Model 924504 20 33 20 4 15 31 9 23 32 34 25 23 36 20 2 19 18 19 23 25 3 23 23 30 24 35 28 23 7 11 7 14 1 12 10 13 10 8 27 12 14 5 21 12 16 26 22 6 29 23 24 37 23 17 8 PS0592 28 BRUSH HEAD Model 924504 Item Part No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 Qty. 01061300 1 01060900 1 02468300 1 05946800 2 05946900 4 05963700 2 05957900 2 05947000 16 06437300 2 06435800 8 06308400 2 06308600 20 06533200 2 06529200 20 02468400 1 02468500 2 07109400 2 02468600 1 06529600 2 02468700 5 02468800 2 00547800 2 02411300 8 05423400 2 05409700 2 01062900 1 02469000 1 02469100 1 02469200 2 02469300 1 02469400 1 02469500 1 02469600 1 02469700 1 02469800 1 02469900 1 02470000 1 Description Chain Tightener Sprocket Chain, Assembly #40 x 106 Bolt-Hex .25-20 x .75 Grade 5 Bolt-Hex .31-18 x 1.00 Grade 5 Bolt-Hex .31-18 x 2.25 Grade 5 Bolt-Hex .38-16 x 1.50 Grade 5 Bolt-Hex .31-18 x .75 Grade 5 Washer-Flat-Steel .281 x .62 x .065 Washer-Flat-Steel .312 x .734 x .065 Washer-Lock .25 x .062 Regular Washer-Lock .31 x .078 Regular Nut-Hex .25-20 Nut-Hex .31-18 Pin, Spring Lok .187 x 1.25 Nut, Lok Stamped .31-18 Wheel, 5 inch Diameter Spring, Tension .50 x 3.00 Nut-Locking-Center .38-16 Screw, Gear 10.9 M6 x 1-20 Lanyard .06 Cable 1.25 x 6 Pin, Hitch .38 x 2 Flange, Spherical 2 inch Bearing 1.00 Bore, Spherical Bearing-Ball .84 Hex x 52 MM x 1.07 Retainer Plate Weldment, Core Arm, Idler Weldment, Caster Leg Bushing .62 x 12 Gauge x .75 Shield, Chain Shield Chain Top Weldment, Head Shield, Input Weldment, Broom Frame Shaft, Hex 20.5 w/Hole Set, 24 Section 29 BRUSH DRIVE UNIT Model 924504 21 6 1 23 2 8 21 7 3 4 17 5 10 2 9 12 36 32 26 35 4 10 2 31 34 24 3 10 46 32 28 27 1 25 11 15 14 30 33 13 15 16 20 22 19 18 29 14 42 41 40 44 43 37 39 38 41 45 PS0581 30 BRUSH DRIVE UNIT Model 924504 Item Part No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 05947500 02404800 06307200 02404900 02471751 02470900 00597000 02470151 02405051 06529800 06215700 02471851 06418500 05409700 02429600 02447600 06436800 02429100 02430600 05803000 05961100 01062000 06436200 06529600 02429451 07028500 07002600 05959400 05805600 06529600 02400400 06600300 05958000 02429800 06001100 01207800 02429551 06308800 06529400 50202100 06005500 07005300 06530400 07307000 07210800 06435700 Qty. 4 4 4 2 1 1 1 1 1 4 4 1 2 2 4 1 1 1 1 1 3 1 1 3 1 2 2 4 1 4 1 2 2 1 2 1 1 2 2 1 2 3 3 1 1 4 Description Bolt-Hex .31-18 x 1.25 Grade 5 Retainer Washer-Locking-Internal .313 x .030 Pivot, Center Plate, Top Mount T-Lock Handle Washer-Cupped Serrated .38 Guard, Shaft Frame, Adapter Nut-Locking-Top .31-18 Bolt-Round Head Square Neck .31-18 x .75 Grade 5 Plate, Bottom Mount Washer-Flat-Steel 1.015 x 1.500 x .125 Bearing, Ball Flange, Bearing Spacer 1.006 x 1.307 x .500 Washer-Flat-Steel .390 x .88 x .18 Shaft Universal Joint Pin-Roll .188 x 1.50 Bolt-Hex .38-16 x 3.25 Grade 5 Sprocket Washer-Flat-Steel .406 x .812 x .065 Nut-Locking-Center .38-16 Plate, Mounting Bolt, Hex Flanged Whizloc Head .38-16 x .75 Nut-Retainer .38-16 Bolt-Hex .38-16 x .75 Grade 5 Pin-Roll .188 x 1.75 Nut-Locking-Center .38-16 Gear Box Assembly Key-Woodruff .188 x .75 x .313 SAE 9 Bolt-Hex .38-16 x 1.25 Grade 5 Sprocket Screw-Set .25-20 x .25 Socket Head Cup Point Chain Plate, Stiffener Washer-Lock .38 x .094 Nut-Hex .38-16 Hub Assembly Screw-Set .31-18 x .38 Socket Head Cup Point Bolt-Serrated Round Head Slotted .31-18 x .75 Nut-Locking-Flanged .31-18 Pulley-V 9.00 x 1.25 V-Belt Washer-Flat-Steel .38 x .875 x .083 31 CONTINUITY DIAGRAM Model 924333, 334 The diagrams below show the various states of connection for electrical components. The solid lines on switches show continuity. NOTE: All switches are viewed from the rear. Key Switch Hand Warmer Switch (02739600) (02485700) S G S G R B A M OFF R B A M S G RUN R M B A START HAND WARMER OFF HAND WARMER ON Solenoid (Top View) (03679000) NOT ENERGIZED ENERGIZED PS0661 32 WIRING DIAGRAM Model 924333, 334 HEAD LIGHT 2 1 2 1 2 9 1 BLACK BROWN/ORANGE 6 A.C. LIGHTING ENGINE BROWN/ORANGE YELLOW YELLOW YELLOW D.C. CHARGE PURPLE RED 3 HAND WARMER SWITCH MAGNETO 1 1 2 2 LEFT HAND WARMERS 1 RIGHT 2 WHITE / BLACK 1 2 M STARTER BLACK 4 3 G RED BLACK A BATTERY RED BLACK B RED 5 R 8 A B RED FUSE 15 AMP A 7 S COIL 2 KEY SWITCH COIL 1 BROWN STARTER SOLENOID BLACK PS0672 Item Part No. 1 2 3 4 5 6 7 8 9 Qty. 08260800 AR 08261000 AR 02485900 AR 07532900 2 AR 03679000 1 02488900 1 52707300 1 00524700 1 02485700 1 Description Engine, 10HP OHV Tecumseh- 12 Volt Engine, 11HP OHV Tecumseh- 12 Volt Headlight Grips, Hot Battery Recommend 340 to 350 CCA at 0° F. Size U1R or U1L Solenoid Wire Harness 12 Volt Switch Assembly, Key 15 AMP Fuse Switch, Hand Warmer 33 CONTINUITY DIAGRAM Model 924502, 503 The diagrams below show the various states of connection for electrical components. The solid lines on switches show continuity. NOTE: All switches are viewed from the rear. Key Switch Hand Warmer Switch (02739600) (02485700) S G R B A M S G OFF R B A M S G RUN R M B A START HAND WARMER OFF Chute Motor Switch Solenoid (Top View) (02485600) (03679000) NOT ENERGIZED HAND WARMER ON ENERGIZED LEVER LEFT CHUTE LEFT LEVER RIGHT CHUTE RIGHT PS0841 34 WIRING DIAGRAM Model 924502, 503 HEAD LIGHT 2 1 2 1 2 3 1 BROWN/ORANGE A.C. LIGHTING ENGINE BROWN/ORANGE YELLOW 6 YELLOW YELLOW 11 HAND WARMER SWITCH BLACK D.C. CHARGE PURPLE RED MAGNETO WHITE / BLACK 1 1 2 2 LEFT HAND WARMERS 1 1 2 2 RIGHT M STARTER BLACK 4 RED A BATTERY 9 CHUTE MOTOR SWITCH BLACK RED 3 G PURPLE 2 1 CHUTE MOTOR 4 BLACK B RED 5 A FUSE 15 AMP R 8 5 3 BLACK/VIOLET 6 B A VIOLET B RED A BLACK S COIL 2 COIL 1 BROWN 10 KEY SWITCH 7 STARTER SOLENOID BLACK Item Part No. 1 PS0850 Qty. 08261100 AR 08261000 AR 2 02485900 AR 3 07532900 2 4 AR 5 03679000 1 6 02488700 1 7 52707300 1 8 00524700 1 9 02485600 1 10 02486300 1 11 02485700 1 Description Engine, 13 HP OHV Tecumseh- 12 Volt Engine, 11 HP OHV Tecumseh- 12 Volt Headlight Grips, Hot Battery Recommend 340 to 350 CCA at 0° F. Size U1R or U1L Solenoid Wire Harness 12 Volt Switch Assembly, Key 15 AMP Fuse Switch, Chute Motor Motor, Electric Right Hand- Chute Switch, Hand Warmer 35 CONTINUITY AND WIRING DIAGRAMS Model 924119, 120, 504 HEAD LIGHT 2 1 2 1 2 3 1 4 HAND WARMER SWITCH BLACK A.C. LIGHTING ENGINE YELLOW YELLOW BROWN/ORANGE BROWN/ORANGE YELLOW 5 D.C. CHARGE RED 1 1 2 2 LEFT HAND WARMERS 1 1 2 2 RIGHT BLACK PS0830 Item Part No. 1 2 3 4 5 Qty. 08262200 08260700 08261200 02485900 07532900 02488800 02485700 1 1 1 1 2 1 1 Description Engine, 10HP L Head Tecumseh - 120 Volt (119) Engine, 10HP OHV Tecumseh- 120 Volt (120) Engine, 9HP Tecumseh OHV (504) Headlight Handle Hand Warmer with Terminal Wire Harness-Hand Warmers and Light (119, 120, 504) Switch, Hand Warmer The diagrams below show the various states of connection for electrical components. The solid lines on switches show continuity. NOTE: All switches are viewed from the rear. Hand Warmer Switch (02485700) HAND WARMER OFF HAND WARMER ON PS0820 36 Ariens Company 655 West Ryan Street P.O. Box 157 Brillion, WI 54110-0157 920-756-2141 Fax 920-756-2407 www.ariens.com