Download Ariens 924117 - 1024 User's Manual

Sno-Thro
®
Parts Manual
Models
924116 - 1028
924117 - 1024
924300 - 1024
924505 - 1332
924506 - 1336
924507 - 936
924508 - 1128
02494000A 8/01
Supersedes 02494000
Printed in USA
THE MANUAL
PRODUCT REGISTRATION
Before you operate your unit, carefully and completely
read manuals supplied with the unit. The contents will
provide you with an understanding of safety instructions
and controls during normal operation and maintenance.
For your safety and the safety of others always read,
understand, and follow all DANGER, WARNING, and
CAUTION messages found in manuals and on safety
decals.
A warranty registration card must be filled out, signed,
and returned at time of purchase. This card activates the
warranty. Claims meeting requirements during limited
warranty period will be honored.
YOUR SATISFACTION IS IMPORTANT
Questions? Please follow these helpful steps:
1. Refer to the manuals supplied with your unit.
They will guide you through safe and proper
operation and maintenance.
They contain specifications on your unit.
If your questions are not answered in these manuals,
go to step number two.
2. Contact Your Dealer.
Our dealers will be happy to supply any service or
advice required to keep your unit operating at peak
efficiency.
A factory trained staff is available to support your
equipment needs. They stock genuine Ariens parts
and lubricants manufactured with the same precision
and skill as the original.
If your questions are not resolved by the support
staff, ask for the manager or owner.
When contacting your Dealer supply your model and
serial numbers.
Hardware descriptions are given in decimals.
Decimals to Fractions
.063
1/16
.563
9/16
.125
1/8
.625
5/8
.188
3/16
.688
11/16
.250
1/4
.750
3/4
.313
5/16
.813
13/16
.375
3/8
.875
7/8
.438
7/16
.938
15/16
.500
1/2
1.00
1
SERVICE AND REPLACEMENT PARTS
When ordering replacement parts or making service
inquiries, know the Model and Serial numbers of your unit
and engine.
Numbers are located on the product registration card in
the unit literature package. They are printed on a serial
number label, located on the frame of your unit.
• Record Unit Model and Serial numbers here:
TO SPEED PARTS ORDERING:
1.
2.
3.
4.
• Record Engine Model and Serial numbers here:
UNAUTHORIZED REPLACEMENT PARTS
Use only Ariens replacement parts. The replacement of
any part on this vehicle with anything other than an
Ariens authorized replacement part may adversely affect
the performance, durability, or safety of this unit and may
void the warranty. disclaims liability for any claims or
damages, whether warranty, property damage, personal
injury or death arising out of the use of unauthorized
replacement parts.
2
Know the model and serial numbers of your unit.
Know the part number required.
Know the quantity required.
Know the part description.
MODELS
TABLE OF CONTENTS
Domestic
DECALS
Model 924116 (1028)
10 H.P. 28” Sno-Thro
Serial No. 000101 and up
Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ENGINE AND DRIVE
Model 924117 (1024)
10 H.P. 24” Sno-Thro
Serial No. 000101 and up
Engine and Belt Drive . . . . . . . . . . . . . . . . . . . . . . . . 6
International
MAIN FRAME
Model 924300 (1024)
10 H.P. 24” Sno-Thro
Serial No. 000101 and up
Speed Selector and Frame . . . . . . . . . . . . . . . . . . . . 8
Wheels and Axle . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Reduction Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Friction Wheel Drive . . . . . . . . . . . . . . . . . . . . . . . . . 13
Global
OPERATORS CONTROLS
Model 924505 (1332)
13 H.P. 32” Sno-Thro
Serial No. 000101 and up
Handlebars Lever Controls, Panel and Dash . . . . . . 14
Cables and Controls. . . . . . . . . . . . . . . . . . . . . . . . . 16
Model 924506 (1336)
13 H.P. 36” Sno-Thro
Serial No. 000101 and up
BLOWER
Model 924507 (936)
9 H.P. 36” Sno-Brush
Serial No. 000101 and up
Chute, Auger and Battery. . . . . . . . . . . . . . . . . . . . .
Gear Case-Aluminum. . . . . . . . . . . . . . . . . . . . . . . .
Gear Case-Cast Iron . . . . . . . . . . . . . . . . . . . . . . . .
Discharge Chute Crank . . . . . . . . . . . . . . . . . . . . . .
Electric Discharge Chute . . . . . . . . . . . . . . . . . . . . .
Model 924508 (1128)
11 H.P. 28” Sno-Thro
Serial No. 000101 and up
18
21
22
24
26
BRUSH
Brush Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Brush Drive Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
ELECTRICAL SYSTEMS
Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Continuity Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . 33
Wiring Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
3
© Copyright 2000, 2001 Ariens Company
DECALS
Model 924116, 117, 300, 505, 506, 508
2
1
3
6
4
5
7
PS0416
Item Part No.
1
2
3
4
5
6
7
08092200
08092300
08092400
08092500
08092700
08092800
08092900
08093000
08093100
07733900
07797600
08094000
07864400
08093900
Qty.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Description
Decal, 1332/1336 Control (505, 506)
Decal, 1024/1128 Control (300, 508)
Decal,1024 Control (117)
Decal, Control 1028 (116)
Decal, Front Panel- 1336 (506)
Decal, Front Panel- 1332 (505)
Decal, Front Panel- 1128 (508)
Decal, Front Panel- 1024 (117, 300)
Decal, Front Panel- 1028 (116)
Decal, Primer
Decal, Cast Iron Bore
Decal, Danger
Decal, Differential Lock
Decal, Danger - Rotating Parts
4
DECALS
Model 924507
2
1
CAUTION / PRUDENCE / CUIDADO
3
Read the operator’s manual.
Lire le manuel d’utilisation.
Leer el manual del operador.
5
Adjust brush height before operating.
Régler la hauteur du balai avant l’utilisation.
Ajustar la altura de la escobilla antes de ponerla en
funcionamiento.
Engage traction drive clutch before attachment clutch.
Enclencher l’embrayage de traction avant l’embrayage
de l’outil.
Activar el embrague de la transmisión de dirección
del tractor antes del embrague del accesorio.
6
4
Operating on irregular terrain could cause the brush
to dig in and drive the machine rearward.
Le balai risque de se planter dans le sol et d’entraîner
la machine vers l’arrière lors d’utilisation sur terrain
accidenté.
El uso en terreno irregular puede hacer que la escobilla
se entierre y hacer que la unidad se desplace hacia
atrás.
07873100B
078644A
07797600
PS0871
Item Part No.
1
2
3
4
5
6
08092100
08092600
07733900
07797600
07873100
07864400
Qty.
1
1
1
1
1
1
Description
Decal- 936 Control
Decal- 936 Dash
Decal-Primer
Decal- Cast Iron Bore
Decal, Caution
Decal-Differential Lock
5
ENGINE AND BELT DRIVE
Model 924116, 117, 300, 505, 506, 507, 508
51
49
3
48
43
50
5
1
11
6
54
55
2
8
11
46
47
12
7
10
4
56
9
53
15
14
17
44
23
13
19
30
29
8
28
5
26
18
5 22
31
32
21 27
22
33
34
25
37
35
20
26
16
24
5
39
52
23
36
38
40
45
Item
1
2
3
4
5
6
7
8
9
Part No.
06529800
06310500
08262200
08260700
08260800
08261000
08261100
08261200
02410900
06435700
06308600
05947300
06005500
02489100
02435700
Qty.
1
1
1
1
1
1
1
1
1
5
2
2
4
1
1
Description
Nut-Locking-Center .31-18
Washer-Lock Internal .31
Engine, 10HP L Head Tecumseh - 120 Volt (116)
Engine, 10HP OHV Tecumseh- 120 Volt (117)
Engine, 10HP OHV Tecumseh- 12 Volt (300)
Engine, 11HP Tecumseh OHV 12 Volt (508)
Engine, 13HP Tecumseh 12 Volt (505, 506)
Engine, 9HP Tecumseh OHV (507)
Belt Finger
Washer-Flat-Steel .38 x .88 x .083
Washer-Locking .31 x .078
Bolt-Hex .31-24 x .75 Grade 5
Screw-Set .31-18 x .38
Engine Sheave (116, 117, 300, 505, 507, 508)
Engine Sheave (506)
6
41
42
PS0448
ENGINE AND BELT DRIVE
Model 924116, 117, 300, 505, 506, 507, 508
Item
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
Part No.
06601800
07412000
02489000
07238500
07238400
07238300
07236200
07325700
07211200
07236100
07005300
07307000
02438900
05947900
06529700
02423651
06529800
05947500
02434851
01213100
02457400
06437200
01103100
02453751
06530300
01026000
06436500
06707000
08309400
05503700
02442800
08317200
07412100
02435300
06707400
02434751
02435400
02411000
06530400
07411600
06306800
06533200
02483100
21533500
07531800
07532000
05502100
07533200
06436700
06529200
06307400
Qty.
1
2
1
1
1
1
1
1
1
1
3
1
1
2
2
1
2
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
3
3
1
1
1
1
1
1
1
1
1
3
3
Description
Key-Straight .25 x 1.75 x .25
Screw-Tap .25-20 x .50
Belt Cover
V-Belt (116)
V-Belt (117, 300, 508, 507)
V-Belt (505)
V-Belt (506)
Pulley-V 8.40 x 1.0 with Key
V-Belt -Traction Drive (116, 117, 300, 507, 508)
V-Belt -Traction Drive (505, 506)
Bolt-Serrated Round Head Slotted .31-18 x .75
Pulley-V 9.0 x 1.25
Hub (116, 117, 300, 505, 506, 508)
Bolt-Hex .25-20 x .50 Grade 5 (117, 300, 505, 506, 507, 508)
Nut-Locking-Center .25-20 (117, 300, 505, 506, 507, 508)
Belt Retainer (117, 300, 505, 506, 507, 508)
Nut-Locking Center .31-18
Bolt-Hex .31-18 x 1.25 Grade 5
Idler Arm
Bearing Spacer
Idler
Washer-Flat-Steel .34 x .69 x .065
Spacer
Idler Arm
Nut-Locking-Nylon .63-18
Wave Washer
Washer-Flat-Steel .38 x .81 x .023
Pin-Cotter .09 x 1.00
Spring-Tension .80 x .73 x 3.06
Bushing-Flange-Nylon .50 x .63 x .31 x .75
Activating Shaft
Spring-Tens .05 x .44 x 3.37
Screw-Tapping 10-24 x .38
Return Clip
Pin-Cotter .09 x .50
Bracket
Pin-Clevis
Belt Finger
Nut-Locking-Flange .31-18 (116, 117, 300, 506, 507, 508)
Screw-Tap .25-20 x .37
Washer-Lock-External .26 x .50 x .026 (300, 505, 506, 508)
Nut-Hex .25-20 (300, 505, 506, 508)
Cord-Extension-110V (116, 117)
Plug-Spark
Fuel Cap
Key, Push/Pull-Tecumseh (116, 117)
Bushing-Flange .50 x.63 x.50 x.75
Boot, Eyelet Terminal (300, 505, 506, 508)
Washer-Flat-Steel .32 x .63 x .062
Nut-Hex .31-18
Washer-Locking .31 x .097 Heavy
7
SPEED SELECTOR AND FRAME
Model 924116, 117, 300, 505, 506, 507, 508
1
2
4
5
6
3
14
11
12
9
10
13
15
16
28
18
27
17
23
20
7
21
26
22
8
19
24
25
24
PS0486
8
SPEED SELECTOR AND FRAME
Model 924116, 117, 300, 505, 506, 507, 508
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Part No.
07533500
02492551
05962900
08335700
06435900
06529600
06529800
07028500
06219800
06537500
06713500
02492800
02487700
02493000
06706900
06436500
01215100
02476300
02485359
02401800
02483500
05531500
05947500
07411600
07411500
02477159
06437200
06441900
06707300
Qty.
1
1
1
1
1
1
1
2
2
2
1
1
1
1
1
1
1
1
1
2
2
1
1
2
4
1
1
1
1
Description
Knob, Ball-Black 1-.41, .38-16
Lever, Shift-Weldment
Bolt-Hex .38-16 x 2.25 Grade 5
Spring-Compression .13 x .78 x 1.25
Washer-Flat-Steel .44 x 1.00 x .083
Nut-Locking-Center .38-16
Nut-Locking-Center .31-18
Bolt-Hex Flanged Whiz Lock Head .38-16 x .75
Bolt-Round Head Square Neck .25-20 x 1.00 Grade 5
Nut-Locking Wing .25-20
Pin-Hair Internal .08 x .18 x 1.18
Rod, Shift-Upper
Rod, Shift-Lower
Pivot, Rod
Pin-Cotter .09 x .75
Washer-Flat-Steel .38 x .81 x .023
Clevis Pin .37/.38 x .69
Arm, Shift
Main Frame
Bolt Strap (116, 117, 300, 507, 508)
Bolt Strap (505, 506)
Bushing-Sleeve .33 x .50 x .75
Bolt-Hex .31-18 x 1.25 Grade 5
Screw-Tapping .25-20 x .37 Hex Washer Head
Screw-Tapping .31-18 x .50 Hex Washer Head
Cover, Bottom
Washer-Flat-Steel .34 x .69 x .065
Washer-Flat-Steel .53 x 1.06 x .095
Pin-Cotter .12 x .75
9
WHEELS AND AXLE
Model 924116
1
12
3
13
8
14
10
2
8
11
7
9
6
5
33
10
8
4
11
13
PS0800
9
8
Model 924117, 300, 505, 506, 507, 508
18
16
27
19
3
14
23
28
22
21
29
20
15
31
30
26
25
35
37
32
24
36
34
17
38
39
33
PS0790
10
WHEELS AND AXLE
Model 924116, 117, 300, 505, 506, 507, 508
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
Part No.
Qty.
07150300 2
07150500 2
07121800 2
07121600 2
02483200 1
05718400 1
02439600 1
06600800 1
06436900 4
00301700 2
05409300 2
01014200 2
07053700 2
06529700 6
07103700 2
07108700 2
07107600 2
07107700 2
07121900 2
07121700 2
02437151 1
02440951 1
52405400 AR
52405500 AR
02437051 1
02441051 1
05505700 1
06307000 1
07012600 1
05502900 1
52405900 1
01037400 1
08300700 1
01037200 1
05948100 1
06530900 1
05803200 1
01037500 1
52405300 1
05803000 1
07412200 8
02457859 2
05417700 2
06437400 2
07028600 8
06530100 8
Description
Tire/Wheel Assembly 16 x 6.50 - 8 (116)
Wheel 6.50 x 8.00 (116)
Tire 4.80-8 (117, 300)
Tire 16 x 6.50-8 (116, 505, 506, 507, 508)
Shaft, Axle (116)
Ring, Retaining .88 x .05 (116)
Spur Gear (116)
Woodruff Key .25 x .88 x .38 (116)
Washer-Flat-Steel .88 x 1.25 x .062 (116)
Bearing Flange (116)
Bearing, Ball .88 x 1.75 x .50 (116)
Flange, Bearing (116)
Pin-Lock .31 x 1.75 (116)
Nut-Locking-Center .25-20 (116)
Tube 4.00 x 8 (117, 300)
Tube 6.50 x 8 (116, 505, 506, 507, 508)
Wheel 4.80-8 (117, 300)
Wheel 6.50-8 (505, 506, 507, 508)
Tire/Wheel Assembly #34-4.80/4.00 x 8 (117, 300)
Tire/Wheel Assembly #35-16 x 6.50 (505, 506, 507, 508)
Axle-Right Hand (505, 506)
Axle-Right Hand (117, 300, 507, 508)
Axle Assembly-Left Hand (Contains Items 19-23) (505, 506)
Axle Assembly-Left Hand (Contains Items 19-23) (117, 300, 507, 508)
Axle-Left Hand (505, 506)
Axle-Left Hand (117, 300, 507, 508)
Bushing-Sleeve .75 x .81 x .75 (117, 300, 505, 506, 507, 508)
Washer-Locking .25 x .05 (117, 300, 505, 506, 507, 508)
Fitting-Lube .25-28 x .26 (117, 300, 505, 506, 507, 508)
Bushing-Sleeve .56 x .63 x .63 (117, 300, 505, 506, 507, 508)
Lockout Hub Assembly (Contains Items 25-27, 30, 31) (117, 300, 505, 506, 507, 508)
Pin (117, 300, 505, 506, 507, 508)
Spring-Compression .03 x.34 x 1.06 (117, 300, 505, 506, 507, 508)
Lockout Hub (117, 300, 505, 506, 507, 508)
Screw-Cap .25-20 x 2.00 Grade 8 (117, 300, 505, 506, 507, 508)
Nut-Jam-Nylon .25-20 (117, 300, 505, 506, 507, 508)
Pin-Roll .09 x 1.00 (117, 300, 505, 506, 507, 508)
Knob (117, 300, 505, 506, 507, 508)
Differential Assembly (117, 300, 505, 506, 507, 508)
Pin Roll .19 x 1.50
Screw-Tap .50-20 x .62 Hex Head (117, 300, 505, 506, 507, 508)
Bearing Retainer (117, 300, 505, 506, 507, 508)
Bearing-Ball 1.13 x 2.19 x .63 (117, 300, 505, 506, 507, 508)
Washer-Flat-Steel 1.14 x 1.72 x .13
Bolt Serrated Neck Slotted .25-20 x .50
Nut-Locking-Flange .25-20
11
REDUCTION DRIVE
Model 924116, 117, 300, 505, 506, 507, 508
6
5
7
10
4
9
8
3
11
2
2
17
12
16
23
13
14
22
1
22
14
24
15
21
20
19
14
18
PS0463
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Part No.
02477300
06437200
02476800
05531600
06436600
00308500
05435200
02414100
06530600
06536400
05718300
07530500
06529800
06436100
02436700
02477700
07029700
05802900
05800900
52403200
02436800
05502600
06435700
06536100
Qty.
1
2
1
1
1
1
1
1
4
1
1
1
1
6
1
1
1
1
1
1
1
2
2
1
Description
Hex Shaft
Washer-Flat-Steel .34 x .69 x .065
Hex Shaft
Spacer .45 x .75 x 1.60
Washer-Flat-Steel .51 x .88 x .072
Bearing Flange
Bearing-Ball .44 x 1.38 x .44
Bearing Flange
Nut-Locking Dual Face 10-24
Nut-Locking-Center .44-14
Ring-Retaining External .31 x .025
Idler
Nut-Locking-Center .31-18
Washer-Flat-Steel .630 x 1.01 x .062
Pinion Shaft
Roller Chain #41-34 Pitches
Drive Fitting-Hydraulic
Pin Roll .16 x 1.00
Pin, Roll .13 x 1.00
Pinion and Sprocket Assembly (Contains Items 21, 22)
Pinion and Sprocket
Bushing-Flange .63 x .75 x .50 x .88
Washer-Flat-Steel .38 x .88 x .083
Nut, Jam .31-18
12
FRICTION WHEEL DRIVE
Model 924116, 117, 300, 505, 506, 507, 508
13
12
7
14
11
7
3
9
5
8
2
6
10
16
4
18 19
24
1
20 22
15
17
25
23
1
21
26
20
PS0452
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Part No.
Qty.
07411500 8
02445500 1
00300300 1
02445400 1
05702100 1
06436900 1
05502600 2
05512600 1
06530500 1
05409300 1
02444500 1
52404600 AR
02477000 1
05802900 2
01054600 1
02407100 1
02407600 1
06600600 1
02458200 1
05435100 2
02415500 1
00303400 1
06437200 1
06308600 1
05946900 1
02458100 1
Description
Screw-Tapping .31-18 x .50
Spindle Hub
Friction Disc
Disc Hub
Ring-Retaining-Internal 1.75 x .062
Washer-Flat-Steel .88 x 1.25 x .062
Bushing-Flange .63 x .750 x .50 x .88
Bushing-Sleeve .88 x 1.25 x .53
Nut-Locking-Nylon .88-14
Bearing-Ball .88 x 1.75 x .50
Carrier
Friction Wheel Assembly (Contains 1-11)
Carrier Shaft
Pin-Roll .16 x 1.00
Drive Plate
Drive Disc Spacer 1.30 x .76 x .19
Spindle
Key-Woodruff .13 x .50 x .20
Housing Mount
Bearing .63 x 1.38 x .43
Bearing Spacer
Roller
Washer-Flat-Steel .34 x .69 x .065
Washer-Lock .31 x .078
Bolt-Hex .31-18 x 1.00 Grade 5
Spindle Housing
13
HANDLEBARS, LEVER CONTROLS, PANEL AND DASH
Model 924116, 117, 300, 505, 506, 507, 508
14
14
13
2
9
17
16
15
Rear View
13
17
16
17
16
3
1
20
18
11
22
7
10
8
12
25 26
6
27
24
7
19
5
4
28
21
23
PS0813
14
HANDLEBARS, LEVER CONTROLS, PANEL AND DASH
Model 924116, 117, 300, 505, 506, 507, 508
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Part No.
Qty.
Description
52415100
52415200
02491651
06212100
06529800
06220100
06529700
02491851
07511800
02486451
05952500
06529700
02493100
02493200
06437200
02492100
05803400
52415300
52415400
52415500
52415600
52415700
52415800
52415900
07511200
02485000
07416700
06214300
06221600
06446800
06307400
06439400
07531700
07028500
1
1
1
2
2
2
7
1
2
1
2
2
1
1
4
2
4
AR
AR
AR
AR
AR
AR
AR
1
1
3
5
4
4
4
4
4
4
Handlebar, Upper Right Hand (Includes Hand Warmer)
Handlebar, Upper Left Hand (Includes Hand Warmer)
Panel, Sub-Weldment
Bolt-Round Head Square Neck .31-18 x 1.50 Grade 5
Nut-Locking-Center .31-18
Bolt-Round Head Square Neck .25-20 x 1.25
Nut-Locking-Center .25-20
Handlebar, Lower
Bumper
Bracket, Cable Support (116, 505, 506)
Bolt-Hex .25-20 x 1.50 Grade 5 (116, 505, 506)
Nut-Locking-Center .25-20 (116, 505, 506)
Lever, Right Hand-Coated
Lever, Left Hand-Coated
Washer-Flat-Steel .34 x .69 x .065
Cam, Interlock
Pin-Roll .125 x .75
Panel with Decal - 936 (507)
Panel with Decal - 1024 (117)
Panel with Decal - 1028 (116)
Panel with Decal - 1332 (505)
Panel with Decal - 1024 (300)
Panel with Decal - 1128 (508)
Panel with Decal - 1336 (506)
Bushing, Snap (116, 117, 300, 508)
Headlamp, Oval with 1156 Bulb
Screw-Tapping 10-16 x .75 Hi-Lo
Bolt-Round Head Square Short Neck.25-20 x .50
Bolt-Round Head Square Neck .31-18 x 2.25
Washer, Saddle-.32 x .94 x .062
Washer-Locking .31 x .097 Heavy
Washer-Flat-Steel .33 x .88 x .062
Knob- Wing .31-18
Bolt-Screw Hex Flanged Whiz Lock Head .38-16 x .75
15
CABLES AND CONTROLS
Model 924116, 117, 300, 505, 506, 507, 508
11
12
13
11
9
1
10
1
12
13
5
4
6
4
8
10
5
8
3
3
2
7
Rear View
15
7
8
6
9
2
13
12
18
24
19
20
14
26
25
22
21
23
16
27
17
29
28
30
32
16
31
PS0880
CABLES AND CONTROLS
Model 924116, 117, 300, 505, 506, 507, 508
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Part No.
08337100
02492200
05970400
05957800
06529600
06436200
08320900
02463900
01123800
02492300
08337000
07533500
06437300
06437300
06707400
06707400
06947500
06947400
02485551
05802600
06530200
01054200
02422700
05947000
02422800
06529800
02408600
06005500
02213500
52404700
06707400
06707000
02406900
08309400
02427200
Qty.
2
1
1
1
1
1
1
1
2
1
1
1
2
3
2
3
1
1
1
1
1
1
1
1
1
3
1
1
1
1
1
2
1
1
1
Description
Spring-Tension .056 x .50 x 3.76
Arm, Interlock
Bolt-Hex .38-16 x 4.50 Grade 5 (116, 505, 506)
Bolt-Hex .38-16X3.00 Grade 5 (117, 300, 507, 508)
Nut-Locking-Center .38-16
Washer-Flat-Steel .41 x .81 x .065 (116, 505, 506)
Spring-Compression .19 x .56 x 1.62 (116, 505, 506)
Pressure Flange (116, 505, 506)
Washer, Friction (116, 505, 506)
Lever, Deflector (116, 505, 506)
Spring-Tension .05 x .44 x 38 x 1.45
Knob, Ball-Black 1-.41, .38-16 (116, 505, 506)
Washer-Flat-Steel .28 x .62 x .065 (117, 300, 507, 508)
Washer-Flat-Steel .28 x .62 x .065 (116, 505, 506)
Pin-Cotter .09 x .50 (117, 300, 507, 508)
Pin-Cotter .09 x .50 (116, 505, 506)
Cable, Auger
Cable, Traction
Lever, Clutch
Pin-Roll .16 x .88
Nut-Locking-Nylon .31-18
Spacer, Adapter
Adapter
Bolt-Hex .31-18 x .75 Grade 5
Yoke, Clutch Engagement
Nut-Locking-Center .31-18
Spacer 1.00 x .64 x .38
Screw-Set .31-18 x .38 Socket Head
Rod Adapter
Spring Assembly
Pin-Cotter .09 x .50
Pin-Cotter .09 x 1.00
Rod, Fork Pivot
Spring-Tension .08 x .73 x 3.06 Weldment
Clutch Fork
17
CHUTE, AUGER AND BATTERY
Model 924116, 117, 300, 505, 506, 508
56
15
17
55
12
58
54
14
60
7 18
7
17
15
16
30
22
43
20
6
5
1
46
45
8
51
36 53
48 47 52
49
22
21 13
36
11
50
2
13
31
36 44
42
57
24
37
32 34
38
59
40
30
29
25
33
19
10
3
4
35
10
41
26
39
9
25
23
35
28
27
PS0437
18
CHUTE, AUGER AND BATTERY
Model 924116, 117, 300, 505, 506, 508
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Part No.
Qty.
Description
04912900
1
A/R
1
1
2
6
2
2
1
4
10
1
1
4
1
2
1
2
1
2
1
1
1
1
1
1
2
2
4
5
5
7
6
1
1
1
1
1
7
9
8
4
1
1
1
1
1
1
1
1
1
1
Cover, Battery (300, 505, 506, 508)
Battery Recommend 340 to 350 CCA at 0° F. Size U1R or U1L (300, 505, 506, 508)
Battery Tray (506)
Battery Tray (300, 508, 505)
Bolt-Round Head Square Neck .25-20 x 7.00 (300, 505, 506, 508)
Washer-Flat-Steel .28 x .62 x .065 (300, 505, 506, 508)
Wing Nut-Locking .25-20 (300, 505, 506, 508)
Washer-Flat-Steel .41 x .81 x .065 (300, 505, 506, 508)
Solenoid (300, 505, 506, 508)
Bolt-Hex .25-20 x .75 Grade 5 (300, 505, 506, 508)
Nut-Lock-Flange .25-20
Cover, Solenoid (300, 505, 506, 508)
Rod, Chute (116, 505, 506)
Washer-Flat-Steel .44 x 1.00 x .083
Spring, Compression (116, 505, 506)
Washer-Flat-Steel .28 x .62 x .065 (116, 505, 506)
Wave Washer (117, 300, 508)
Ring, Retaining-External .22 x .035 (116, 505, 506)
Washer-Plastic .39 x .88 x .062 (117, 300, 508)
Screw-Tapping .25-20 x .50 Hex Washer Head (300, 505, 506, 508)
Blower Housing w/Decal 28" (116)
Blower Housing w/Decal 24" (117)
Blower Housing w/Decal 24" (300)
Blower Housing w/Decal 28" (508)
Blower Housing w/Decal 32" (505)
Blower Housing w/Decal 36" (506)
Runner, Skid Shoe-1/2" Flange (117, 300, 508, 505, 506)
Runner, Double Flange (116)
Nut-Locking .38-16 (116, 505, 506)
Nut-Locking .38-16 (117, 300, 508)
Washer-Flat-Steel .38 x .88 x .083 (116, 117, 300, 508)
Washer-Flat-Steel .38 x .88 x .083 (505)
Washer-Flat-Steel .38 x .88 x .083 (506)
Scraper Blade 28" (116)
Scraper Blade 24" (117, 300)
Scraper Blade 28" (508)
Scraper Blade 32" (505)
Scraper Blade 36" (506)
Nut-Locking-Center .31-18 (116, 117, 300, 508)
Nut-Locking-Center .31-18 (505)
Nut-Locking-Center .31-18 (506)
Fitting-Lube .25-28 x .256
Rake, Left Hand - 28" (16" O.D.) (508) (Includes Item 26)
Rake, Right Hand - 28" (16" O.D.) (508) (Includes Item 26)
Rake, Right Hand - 24" (16" O.D.) (117, 300) (Includes Item 26)
Rake, Left Hand - 24" (16" O.D.) (117, 300) (Includes Item 26)
Rake, Left Hand - 28" (15" O.D.) (116) (Includes Item 26)
Rake, Right Hand - 28" (15" O.D.) (116) (Includes Item 26)
Rake, Left Hand - 32" (16" O.D.) (505) (Includes Item 26)
Rake, Right Hand - 32" (16" O.D.) (505) (Includes Item 26)
Rake, Left Hand - 36" (16" O.D.) (506) (Includes Item 26)
Rake, Right Hand - 36" (16" O.D.) (506) (Includes Item 26)
02484559
02488659
06220400
06437300
06537500
06436200
03679000
05946800
06530100
02484459
02479800
06435900
08335200
06437300
01320200
05718500
06416800
07412000
52414200
52414300
52414400
52414500
52414600
52414700
02483059
02483859
06529600
06529600
06435700
06435700
06435700
02479159
01016459
00620159
00620859
03519259
06529800
06529800
06529800
07012600
52410700
52410800
52413600
52413500
52411800
52411900
52412200
52412300
52412500
52412600
19
AUGER AND BATTERY
Model 924116, 117, 300, 505, 506, 508
Item
Part No.
28 51001500
29 00301700
03086200
30 06211800
06211800
31 06212000
32 05418200
05406300
33 07028600
34 06212200
06212200
06212200
35 06436300
36 06529700
37 02437451
38 05503500
39 06436400
40 06306600
41 05947100
42 08316400
43 06441100
44 02440551
45 02448100
46 06707500
47 05946800
48 52404800
49 02217800
50 06806700
51 07028500
52 07002600
53 01014200
03086100
54 06437200
55 06945400
56 52411000
52414800
57 05947900
58 06908200
59 07533200
60 52410900
61 06308400
Qty.
2
1
1
2
3
3
1
1
6
5
7
6
4
6
2
2
2
2
2
1
1
1
1
1
1
1
1
2
2
2
1
1
1
1
1
1
2
1
2
1
2
Description
Shear Bolt Service Assembly (Includes Item 25)
Bearing Flange (116,117, 300, 508, 505)
Bearing Flange (506)
Bolt-Round Head Square Neck .38-16 x .75 (116, 505, 506)
Bolt-Round Head Square Neck .38-16 x .75 (117, 300, 508)
Bolt-Round Head Square Neck .38-16 x 1.00
Bearing-Ball 1.0 x 2.0 x .56 (506)
Bearing-Ball .75 x 1.75 x .50 (116, 117, 300, 505, 508)
Bolt-Serrated-Neck-Slotted .25-20 x .50
Bolt-Round Head Square Neck .312-18 x .62 (116, 117, 300, 505, 508)
Bolt-Round Head Square Neck .312-18 x .62 (505)
Bolt-Round Head Square Neck .312-18 x .62 (506)
Washer-Flat Steel 1.01 x 1.51 x .062
Nut-Locking-Center .25-20
Bearing Support
Bushing-Flange 1.00 x 1.12 x .62 x 1.50
Washer-Flat-Steel .51 x 1.44 x .13
Washer-Lock .50 x .151
Bolt-Hex .50-13 x 1.00 Grade 5
Spring-Tension .06 x .56 x 8.00
Washer-Flat-Steel .52 x .83 x .062 (117, 300, 508)
Arm Extension (116)
Clevis Pin
Pin-Cotter .06 x .75
Bolt-Hex .25-20 x .75 (116)
Brake Arm Assembly (Contains Items 49, 50)
Brake Lining
Rivet-Tubular .19 x .44
Bolt-Hex Flanged Whizloc Head .38-16 x .75
Nut-Retainer .38-16
Bearing Flange (116, 117, 300, 505, 508)
Bearing Flange (506)
Washer-Flat-Steel .34 x .69 x .065 (116, 505, 506)
Cable, Control (116, 505, 506)
Chute, Discharge with Remote (116)
Chute- Electric (505, 506)
Bolt-Hex .25-20 x .50 Grade 5
Clamp-Cushioned (116, 505, 506)
Boot, Eyelet Terminal (300, 505, 506, 508)
Chute, Discharge without Remote (117, 300, 508)
Washer-Locking .25 x.06 Regular
20
GEAR CASE-ALUMINUM
Model 924116
8
2
4
5
7
10
12
3
11
24
6
1
13
14
15
13
26
16
11
17
25
21
9
21
22
18
19
23
17
20
19
PS0692
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Part No.
Qty.
05803700 2
02477251 1
05618900 1
05511200 1
03210300 1
05804500 1
06600100 1
52413400 AR
07412900 1
06219700 2
05618800 2
02470600 1
05530100 2
52402600 1
00925700 1
02470700 1
06530100 4
07413000 2
05803000 2
05806900 1
06416600 2
05520600 1
02479300 1
06219800 2
06442500 1
00008000 1
Description
Pin-Roll .25 x 1.75
Impeller-.75 I.D.x 12" O.D.
Seal, Oil .75 x 1.38 x .31
Bushing-Flange .75 x 1.00 x .75 x 1.25
Thrust Collar
Pin-Groove .19 x 1.25
Key-Woodruff .19 x .88 x .38
Case, Gear-Large Bore-28" (Contains Items 3-6, 9-18, 20-25)
Screw-Tapping .38-16 x .50
Bolt-Round Head Square Neck .25-20 x 1.25 Grade 5
Seal 1.00 x 1.38
LS Case Half Left Hand Large Bore
Bushing-Flanged 1.00 x 1.12 x 1.50 x .50
Worm Shaft and and Gear Assembly
Locktite Gasket 518 850 cc Cartridge
LS Case Half Right Hand Large Bore
Nut-Locking-Flange .25-20
Screw-Tapping 10-24 x .75
Pin-Roll .19 x 1.50
Pin-Groove .31 x 1.44
Washer-Flat-Steel 1.01 x 1.54 x .062
Bushing-Flange .50 x 1 x .75
Rake Shaft 28"
Bolt-Round Head Square Neck .25-20 x 1.00
Washer-Fiber .44 x .66 x .032
Ariens 16 Oz. Bottle of L2 Lube (2 oz. capacity)
21
GEAR CASE-CAST IRON
Model 924117, 300, 505, 506, 508
2
1
3
31
1
5
30
4
7
9
11
6
9
8
12
29
10
13
14
15
8
19
27
11
28
26
26
18
17 16
27
25
20
23
21
22
19
13
24
PS0472
22
GEAR CASE-CAST IRON
Model 924117, 300, 505, 506, 508
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
Part No.
Qty.
05801500 2
02476951 1
00643151 1
06600100 1
02437500 1
02406200 1
06601300 1
02401500 1
05606100 1
05404400 2
05404500 2
00200500 2
52400900 1
05707500 1
05607000 2
00113800 1
00403700 1
05947000 1
06307400 1
06437500 1
06600800 2
02472100 1
02459600 1
02406500 1
03519500 1
05803000 2
05946800 4
06306800 4
02401300 1
00200800 1
05505900 2
06408700 2
02406400 1
02400200 1
52408000 AR
52403500 AR
00008000 1
Description
Pin-Roll .31 x 1.75
Impeller -1.00 I.D. x 14" O.D. (506)
Impeller -1.00 I.D. x 12" O.D. (117, 300, 508, 505)
Key-Woodruff .19 x .88 x .38
Worm Shaft-1.00” Diameter (506)
Worm Shaft-1.00” Diameter (117, 300, 508, 505)
Key-Square .19 x 1.00 x .19
Adjustment Plug
Seal 1.00 x 1.31 x .15
Bearing-Cup 1.78 x .48
Bearing-Cone .75 x .61
Bearing Spacer 1.12 x 1.52 x .5
Worm and Gear Service Assembly
Ring-Retaining-Internal 1.78 x .062
Seal 1.63 x 2.13 x .25
Pipe Plug
Dust Cap
Bolt-Hex .31-18 x .75 Grade 5
Washer-Lock .31 x .10
Washer-Flat-Steel .33 x 1.00 x .09
Key-Woodruff .25 x .88 x .38
Rake Shaft 24" 1.00 Diameter (117, 300)
Rake Shaft 28" 1.00 Diameter (508)
Rake Shaft 32" 1.00 Diameter (505)
Rake Shaft 36" 1.00 Diameter (506)
Pin-Roll .19 x 1.50
Bolt-Hex .25-20 x .75 Grade 5
Washer-Lock-External .26 x .50 x .026
Gear Case Cover
Gasket
Bushing-Flange 1.63 x 1.87 x 1.68 x 2.25
Washer-Flat-Steel 1.63 x 2.50 x .01
Gear Case Shaft
Gear Case- Cast Iron
Gear Case- Cast Iron (117, 300, 505, 508)
Gear Case, 32"- Cast Iron (506)
Ariens 16 oz. Bottle of L2 Lube (5 oz. capacity)
23
DISCHARGE CHUTE CRANK
Model 924116, 117, 300, 508
4
1
2
5
3
6
24
23
4
21
11
6
30
29
10
12
22
9
8
31
7
43
32
13
924117, 300, 508
14
34
36
38
28
39
15
16
17
35
18
37
33
924116
25
34
28
26
19
20
16
27
41
40
42
PS0604
24
DISCHARGE CHUTE CRANK
Model 924116, 117, 300, 508
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
Part No.
01019800
07508300
02490700
07412000
03223000
06714500
03222900
06224400
53204400
06436100
03220551
03224300
03220751
06439300
01123800
02480351
03219000
08320900
06436200
06529600
02492451
05947900
06437300
06529700
05947500
06307400
06437200
06435800
02479700
02470400
06308400
06533200
06215700
06529800
06437300
02480751
02480900
05946800
06308400
05947000
03233600
02480251
06219900
Qty.
1
1
1
4
1
3
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
2
2
2
2
2
2
2
1
1
1
1
2
2
4
1
4
4
4
2
2
1
1
Description
Cap, .38 Rod
Knob
Crank, Chute
Screw .25-20 x .50 Hex Washer Head Self Tapping
Cover, Gear
Pin-Spring Clip
Gear, Chute
Bolt-Round Head Square Neck .38-16 x 2.50 Grade 5
Pinion Gear w/Bracket (Contains Items 10-12)
Washer-Flat-Steel .63 x 1.01 x .062
Bracket, Gear
Push Nut
Gear Strap
Washer-Flat-Steel .38 x 1.50 x .062
Friction Washer
Bracket, Chute Support
Friction Plate
Spring-Compression .19 x .56 x 1.62
Washer-Flat-Steel .41 x .81 x .065
Nut-Locking-Center .38-16
Bracket, Chute Crank Support
Bolt-Hex .25-20 x .50 Grade 5
Washer-Flat-Steel .281 x .62 x .065
Nut-Locking-Center .25-20
Bolt-Hex .31-18 x 1.25 Grade 5 (116)
Washer-Locking .31 x .08 Regular (116)
Washer-Flat-Steel .34 x .69 x .065 (116)
Washer-Flat-Steel .31 x .73 x .065
Pin, Connector
Universal Joint
Washer-Locking .25 x .062
Nut-Hex .25-20
Bolt-Round Head Square Neck .31-18 x .75
Nut-Locking-Center .31-18
Washer-Flat-Steel .28 x .62 x .065 (117, 300, 508)
Bracket, Engine (117, 300, 508)
Spacer, Tube (117, 300, 508)
Bolt-Hex .25-20 x .75 Grade 5 (117, 300, 508)
Washer-Locking .25 x .06 x .065 (117, 300, 508)
Bolt-Hex .31-18 x .75 Grade 5 (116)
Spacer, Tube (116)
Bracket, Engine (116)
Bolt-Round Head Square Neck .25-20 x .75 Grade 5
25
ELECTRIC DISCHARGE CHUTE
Model 924505, 506
2
1
4
3
5
8
6
7
3
9
13
10
12
11
PS0860
26
ELECTRIC DISCHARGE CHUTE
Model 924505, 506
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
Part No.
02486959
06530100
07411900
02487100
05947400
02488251
52416500
06437300
02487000
02486800
07414400
06529700
02485159
Qty.
2
6
3
1
1
1
1
1
3
1
2
1
1
Description
Ring, Cover
Nut-Locking-Flange .25-20
Screw-Tapping 12-24 x .50 Hex Washer Head
Cover, Motor
Bolt-Hex .25-20 x 1.25 Grade 5
Bracket, Electric Motor
Motor, Electric Right Hand- Chute
Washer-Flat-Steel .28 x .62 x .065
Clamp, Chute
Gear, Chute
Screw-Tapping .31-18 x.75 Hex Washer Head
Nut-Locking-Center .25-20
Housing, Blower-32" E
27
BRUSH HEAD
Model 924507
20
33
20
4
15
31
9
23
32
34
25
23
36
20
2
19
18 19
23
25
3
23
23
30
24
23
35
28
7
11
7
14
1
12
10
13
10
8
27
12
14
5
21
12
16
26
22
6
29
23
37
24
23
17
8
PS0592
28
BRUSH HEAD
Model 924507
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
Qty.
01061300 1
01060900 1
02468300 1
05946800 2
05946900 4
05963700 2
05957900 2
05947000 16
06437300 2
06435800 8
06308400 2
06308600 20
06533200 2
06529200 20
02468400 1
02468500 2
07109400 2
02468600 1
06529600 2
02468700 5
02468800 2
00547800 2
02411300 8
05423400 2
05409700 2
01062900 1
02469000 1
02469100 1
02469200 2
02469300 1
02469400 1
02469500 1
02469600 1
02469700 1
02469800 1
02469900 1
02470000 1
Description
Chain Tightener
Sprocket
Chain, Assembly #40 x 106
Bolt-Hex .25-20 x .75 Grade 5
Bolt-Hex .31-18 x 1.00 Grade 5
Bolt-Hex .31-18 x 2.25 Grade 5
Bolt-Hex .38-16 x 1.50 Grade 5
Bolt-Hex .31-18 x .75 Grade 5
Washer-Flat-Steel .28 x .62 x .065
Washer-Flat-Steel .31 x .73 x .065
Washer-Lock .25 x .062 Regular
Washer-Lock .31 x .078 Regular
Nut-Hex .25-20
Nut-Hex .31-18
Pin, Spring Lok .19 x 1.25
Nut, Lok Stamped .31-18
Wheel, 5 inch Diameter
Spring, Tension .50 x 3.00
Nut-Locking-Center .38-16
Screw, Gear 10.9 M6 x 1-20
Lanyard .06 Cable 1.25 x 6
Pin, Hitch .38 x 2
Flange, Spherical 2 inch
Bearing 1.00 Bore, Spherical
Bearing-Ball .84 Hex x 52 MM x 1.07
Retainer Plate
Weldment, Core
Arm, Idler
Weldment, Caster Leg
Bushing .62 x 12 Gauge x .75
Shield, Chain
Shield Chain Top
Weldment, Head
Shield, Input
Weldment, Broom Frame
Shaft, Hex 20.5 with Hole
Set, 24 Section
29
BRUSH DRIVE UNIT
Model 924507
21
6
1
23
2
8
21
7
3
4
17
5
10
2
9
36
12
32
26
35
4
10
2
31
34
24
3
10 46
32
28
27
1
25
11
15
13
14
30 33
15
16
20
22
19
18
29
14
42
44
41
40
43
37
38
39
41
45
PS0581
30
BRUSH DRIVE UNIT
Model 924507
Item Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
05947500
02404800
06307200
02404900
02471751
02470900
00597000
02470151
02405051
06529800
06215700
02471851
06418500
05409700
02429600
02447600
06436800
02429100
02495500
05803000
05961100
01062000
06436200
06529600
02429451
07028500
07002600
05959400
05805600
06529600
02400400
06600300
05958000
02429800
06001100
01207800
02429551
06308800
06529400
50202100
06005500
07005300
06530400
07307000
07210800
06435700
Qty.
4
4
4
2
1
1
1
1
1
4
4
1
2
2
4
1
1
1
1
1
3
1
1
3
1
2
2
4
1
4
1
2
2
1
2
1
1
2
2
1
2
3
3
1
1
4
Description
Bolt-Hex .31-18 x 1.25 Grade 5
Retainer
Washer-Locking-Internal .313 x .030
Pivot, Center
Plate, Top Mount
T-Lock Handle
Washer-Cupped Serrated .38
Guard, Shaft
Frame, Adapter
Nut-Locking-Top .31-18
Bolt-Round Head Square Neck .31-18 x .75 Grade 5
Plate, Bottom Mount
Washer-Flat-Steel 1.02 x 1.50 x .125
Bearing, Ball
Flange, Bearing
Spacer 1.01 x 1.31 x .50
Washer-Flat-Steel .39 x .88 x .18
Shaft
Joint, Universal
Pin-Roll .19 x 1.50
Bolt-Hex .38-16 x 3.25 Grade 5
Sprocket
Washer-Flat-Steel .41 x .81 x .065
Nut-Locking-Center .38-16
Plate, Mounting
Bolt, Hex Flanged Whizloc Head .38-16 x .75
Nut-Retainer .38-16
Bolt-Hex .38-16 x .75 Grade 5
Pin-Roll .19 x 1.75
Nut-Locking-Center .38-16
Gear Box Assembly
Key-Woodruff .19 x .75 x .31 SAE 9
Bolt-Hex .38-16 x 1.25 Grade 5
Sprocket
Screw-Set .25-20 x .25 Socket Head Cup Point
Chain
Plate, Stiffener
Washer-Lock .38 x .094
Nut-Hex .38-16
Hub Assembly
Screw-Set .31-18 x .38 Socket Head Cup Point
Bolt-Serrated Round Head Slotted .31-18 x .75
Nut-Locking-Flanged .31-18
Pulley-V 9.00 x 1.25
V-Belt
Washer-Flat-Steel .38 x .88 x .083
31
ELECTRICAL
Model 924116, 117, 300, 505, 506, 507, 508
14
5
1
8
9
2
3
10
13
4
12
13
14
8
9
11
6
7
PS0891
tem
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Part No.
Qty.
02460700 1
07517700 1
06517300 1
02739600 1
52709300 1
02494400 1
02494300 1
02494200 1
07517300 3
07517300 1
06403800 2
06403800 1
06310900 2
06310900 1
02485700 1
02485600 1
00524700 1
07532900 2
09207600 AR
Description
Key- with Cap (300, 505, 506, 508)
Cap- Ignition Switch (300, 505, 506, 508)
Nut-Panel .63-32 (300, 505, 506, 508)
Ignition Switch Assembly (300, 505, 506, 508)
Switch Assembly (Includes Items 1 thru 4) (300, 505, 506, 508)
Harness, Wiring-Light and Hand Warmer (116, 117, 507)
Harness, Wiring-Light and Hand Warmer 12V (300, 508)
Harness, Wiring-Light and Hand Warmer Chute (505, 506)
Cable Tie (300, 505, 506, 508)
Cable Tie (116, 117, 507)
Washer-Flat-Steel .51 x .88 x .024 (505, 506)
Washer-Flat-Steel .51 x .88 x .024 (116, 117, 300, 507, 508)
Washer-Locking-Internal .56 x .04 (505, 506)
Washer-Locking-Internal .56 x .04 (116, 117, 300, 507, 508)
Switch, On/Off Hand Warmer
Switch, Chute Rotation (505, 506)
15 AMP Fuse
Hand Warmer with Terminal (Recommend Fast Drying Epoxy for Installation)
Boot, Switch (Optional)
32
CONTINUITY DIAGRAM
Model 924300, 505, 506, 508
The diagrams below show the various states of connection for electrical components.
The solid lines on switches show continuity.
NOTE: All switches are viewed from the rear.
Key Switch
Hand Warmer Switch
(02739600)
(02485700)
S
G
R
B
A
M
S
G
OFF
R
B
A
M
S
G
RUN
R
M
B
A
START
HAND WARMER
OFF
Chute Motor Switch (Models 505, 506)
Solenoid (Top View)
(02485600)
(03679000)
NOT ENERGIZED
HAND WARMER
ON
ENERGIZED
LEVER LEFT
CHUTE LEFT
LEVER RIGHT
CHUTE RIGHT
PS0841
33
CONTINUITY AND WIRING DIAGRAMS
Model 924116, 117, 507
HEAD LIGHT
1
1
2
2
BLACK
HAND WARMER
SWITCH
3
A.C. LIGHTING
ENGINE
YELLOW
YELLOW
BROWN/ORANGE
BROWN/ORANGE
YELLOW
4
D.C. CHARGE
RED
1
1
2
2
RIGHT
HAND
WARMERS
1
1
2
2
LEFT
BLACK
PS0830
Item Part No.
1
2
3
4
Qty.
02485000
07532900
02488800
02485700
1
2
1
1
Description
Headlamp, Oval with 1156 Bulb
Warmer, Hand - with Terminal (Recommend Fast Drying Epoxy for Installation)
Wire Harness-Hand Warmers and Light
Switch, On/Off Hand Warmer
The diagrams below show the various states of connection for electrical components.
The solid lines on switches show continuity.
NOTE: All switches are viewed from the rear.
Hand Warmer Switch
(02485700)
HAND WARMER
OFF
HAND WARMER
ON
PS0820
34
WIRING DIAGRAM
Model 924300, 508
HEAD LIGHT
1
1
2
8
BLACK
2
HAND WARMER
SWITCH
BROWN/ORANGE
5
A.C. LIGHTING
YELLOW
YELLOW
ENGINE
BROWN/ORANGE
YELLOW
D.C. CHARGE
PURPLE
RED
MAGNETO
1
1
2
2
RIGHT
HAND
WARMERS
1
LEFT
2
WHITE / BLACK
1
2
M
STARTER
BLACK
2
BLACK
RED
3
G
A
BATTERY
RED
R
BLACK
B
RED
4
7
A
B
RED
FUSE
15 AMP
A
6
S
COIL 2
KEY
SWITCH
COIL 1
BROWN
STARTER
SOLENOID
BLACK
Item Part No.
1
2
3
4
5
6
7
8
PS0672
Qty.
02485000 AR
07532900 2
AR
03679000 1
02494300 1
52709300 1
00524700 1
02485700 1
Description
Headlamp, Oval with 1156 Bulb
Warmer, Hand - with Terminal (Recommend Fast Drying Epoxy for Installation)
Battery Recommend 340 to 350 CCA at 0° F. Size U1R or U1L
Solenoid
Wire Harness 12 Volt
Switch Assembly
15 AMP Fuse
Switch, On/Off Hand Warmer
35
WIRING DIAGRAM
Model 924505, 506
HEAD LIGHT
1
1
2
2
BLACK
BROWN/ORANGE
A.C. LIGHTING
5
YELLOW
YELLOW
BROWN/ORANGE
YELLOW
ENGINE
8
HAND WARMER
SWITCH
D.C. CHARGE
PURPLE
RED
MAGNETO
WHITE / BLACK
1
1
2
2
RIGHT
HAND
WARMERS
1
1
2
2
LEFT
M
STARTER
2
BLACK
3
RED
G
A
BATTERY
CHUTE MOTOR
SWITCH
BLACK
RED
PURPLE
2
9
1
CHUTE MOTOR
4
R
BLACK
5
7
B
RED
4
A
FUSE
15 AMP
3
6
B
BLACK/VIOLET
A
VIOLET
B
RED
A
BLACK
S
COIL 2
COIL 1
BROWN
10
KEY
SWITCH
6
STARTER
SOLENOID
BLACK
Item Part No.
1
2
3
4
5
6
7
8
9
10
PS0850
Qty.
02485000 AR
07532900 2
AR
03679000 1
02488700 1
52709300 1
00524700 1
02485700 1
02485600 1
52416500 1
Description
Headlamp, Oval with 1156 Bulb
Warmer, Hand - with Terminal Recommend Fast Drying Epoxy for Installation
Battery Recommend 340 to 350 CCA at 0° F. Size U1R or U1L
Solenoid
Wire Harness 12 Volt
Switch Assembly
15 AMP Fuse
Switch, Hand Warmer
Switch, Chute Motor
Motor, Electric Right Hand- Chute
36
Ariens Company
655 West Ryan Street
P.O. Box 157
Brillion, WI 54110-0157
920-756-2141
Fax 920-756-2407
www.ariens.com