Download Ariens 924117 - 1024 User's Manual
Transcript
Sno-Thro ® Parts Manual Models 924116 - 1028 924117 - 1024 924300 - 1024 924505 - 1332 924506 - 1336 924507 - 936 924508 - 1128 02494000A 8/01 Supersedes 02494000 Printed in USA THE MANUAL PRODUCT REGISTRATION Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance. For your safety and the safety of others always read, understand, and follow all DANGER, WARNING, and CAUTION messages found in manuals and on safety decals. A warranty registration card must be filled out, signed, and returned at time of purchase. This card activates the warranty. Claims meeting requirements during limited warranty period will be honored. YOUR SATISFACTION IS IMPORTANT Questions? Please follow these helpful steps: 1. Refer to the manuals supplied with your unit. They will guide you through safe and proper operation and maintenance. They contain specifications on your unit. If your questions are not answered in these manuals, go to step number two. 2. Contact Your Dealer. Our dealers will be happy to supply any service or advice required to keep your unit operating at peak efficiency. A factory trained staff is available to support your equipment needs. They stock genuine Ariens parts and lubricants manufactured with the same precision and skill as the original. If your questions are not resolved by the support staff, ask for the manager or owner. When contacting your Dealer supply your model and serial numbers. Hardware descriptions are given in decimals. Decimals to Fractions .063 1/16 .563 9/16 .125 1/8 .625 5/8 .188 3/16 .688 11/16 .250 1/4 .750 3/4 .313 5/16 .813 13/16 .375 3/8 .875 7/8 .438 7/16 .938 15/16 .500 1/2 1.00 1 SERVICE AND REPLACEMENT PARTS When ordering replacement parts or making service inquiries, know the Model and Serial numbers of your unit and engine. Numbers are located on the product registration card in the unit literature package. They are printed on a serial number label, located on the frame of your unit. • Record Unit Model and Serial numbers here: TO SPEED PARTS ORDERING: 1. 2. 3. 4. • Record Engine Model and Serial numbers here: UNAUTHORIZED REPLACEMENT PARTS Use only Ariens replacement parts. The replacement of any part on this vehicle with anything other than an Ariens authorized replacement part may adversely affect the performance, durability, or safety of this unit and may void the warranty. disclaims liability for any claims or damages, whether warranty, property damage, personal injury or death arising out of the use of unauthorized replacement parts. 2 Know the model and serial numbers of your unit. Know the part number required. Know the quantity required. Know the part description. MODELS TABLE OF CONTENTS Domestic DECALS Model 924116 (1028) 10 H.P. 28” Sno-Thro Serial No. 000101 and up Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ENGINE AND DRIVE Model 924117 (1024) 10 H.P. 24” Sno-Thro Serial No. 000101 and up Engine and Belt Drive . . . . . . . . . . . . . . . . . . . . . . . . 6 International MAIN FRAME Model 924300 (1024) 10 H.P. 24” Sno-Thro Serial No. 000101 and up Speed Selector and Frame . . . . . . . . . . . . . . . . . . . . 8 Wheels and Axle . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Reduction Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Friction Wheel Drive . . . . . . . . . . . . . . . . . . . . . . . . . 13 Global OPERATORS CONTROLS Model 924505 (1332) 13 H.P. 32” Sno-Thro Serial No. 000101 and up Handlebars Lever Controls, Panel and Dash . . . . . . 14 Cables and Controls. . . . . . . . . . . . . . . . . . . . . . . . . 16 Model 924506 (1336) 13 H.P. 36” Sno-Thro Serial No. 000101 and up BLOWER Model 924507 (936) 9 H.P. 36” Sno-Brush Serial No. 000101 and up Chute, Auger and Battery. . . . . . . . . . . . . . . . . . . . . Gear Case-Aluminum. . . . . . . . . . . . . . . . . . . . . . . . Gear Case-Cast Iron . . . . . . . . . . . . . . . . . . . . . . . . Discharge Chute Crank . . . . . . . . . . . . . . . . . . . . . . Electric Discharge Chute . . . . . . . . . . . . . . . . . . . . . Model 924508 (1128) 11 H.P. 28” Sno-Thro Serial No. 000101 and up 18 21 22 24 26 BRUSH Brush Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Brush Drive Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 ELECTRICAL SYSTEMS Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Continuity Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . 33 Wiring Diagrams. . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 3 © Copyright 2000, 2001 Ariens Company DECALS Model 924116, 117, 300, 505, 506, 508 2 1 3 6 4 5 7 PS0416 Item Part No. 1 2 3 4 5 6 7 08092200 08092300 08092400 08092500 08092700 08092800 08092900 08093000 08093100 07733900 07797600 08094000 07864400 08093900 Qty. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Description Decal, 1332/1336 Control (505, 506) Decal, 1024/1128 Control (300, 508) Decal,1024 Control (117) Decal, Control 1028 (116) Decal, Front Panel- 1336 (506) Decal, Front Panel- 1332 (505) Decal, Front Panel- 1128 (508) Decal, Front Panel- 1024 (117, 300) Decal, Front Panel- 1028 (116) Decal, Primer Decal, Cast Iron Bore Decal, Danger Decal, Differential Lock Decal, Danger - Rotating Parts 4 DECALS Model 924507 2 1 CAUTION / PRUDENCE / CUIDADO 3 Read the operator’s manual. Lire le manuel d’utilisation. Leer el manual del operador. 5 Adjust brush height before operating. Régler la hauteur du balai avant l’utilisation. Ajustar la altura de la escobilla antes de ponerla en funcionamiento. Engage traction drive clutch before attachment clutch. Enclencher l’embrayage de traction avant l’embrayage de l’outil. Activar el embrague de la transmisión de dirección del tractor antes del embrague del accesorio. 6 4 Operating on irregular terrain could cause the brush to dig in and drive the machine rearward. Le balai risque de se planter dans le sol et d’entraîner la machine vers l’arrière lors d’utilisation sur terrain accidenté. El uso en terreno irregular puede hacer que la escobilla se entierre y hacer que la unidad se desplace hacia atrás. 07873100B 078644A 07797600 PS0871 Item Part No. 1 2 3 4 5 6 08092100 08092600 07733900 07797600 07873100 07864400 Qty. 1 1 1 1 1 1 Description Decal- 936 Control Decal- 936 Dash Decal-Primer Decal- Cast Iron Bore Decal, Caution Decal-Differential Lock 5 ENGINE AND BELT DRIVE Model 924116, 117, 300, 505, 506, 507, 508 51 49 3 48 43 50 5 1 11 6 54 55 2 8 11 46 47 12 7 10 4 56 9 53 15 14 17 44 23 13 19 30 29 8 28 5 26 18 5 22 31 32 21 27 22 33 34 25 37 35 20 26 16 24 5 39 52 23 36 38 40 45 Item 1 2 3 4 5 6 7 8 9 Part No. 06529800 06310500 08262200 08260700 08260800 08261000 08261100 08261200 02410900 06435700 06308600 05947300 06005500 02489100 02435700 Qty. 1 1 1 1 1 1 1 1 1 5 2 2 4 1 1 Description Nut-Locking-Center .31-18 Washer-Lock Internal .31 Engine, 10HP L Head Tecumseh - 120 Volt (116) Engine, 10HP OHV Tecumseh- 120 Volt (117) Engine, 10HP OHV Tecumseh- 12 Volt (300) Engine, 11HP Tecumseh OHV 12 Volt (508) Engine, 13HP Tecumseh 12 Volt (505, 506) Engine, 9HP Tecumseh OHV (507) Belt Finger Washer-Flat-Steel .38 x .88 x .083 Washer-Locking .31 x .078 Bolt-Hex .31-24 x .75 Grade 5 Screw-Set .31-18 x .38 Engine Sheave (116, 117, 300, 505, 507, 508) Engine Sheave (506) 6 41 42 PS0448 ENGINE AND BELT DRIVE Model 924116, 117, 300, 505, 506, 507, 508 Item 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 Part No. 06601800 07412000 02489000 07238500 07238400 07238300 07236200 07325700 07211200 07236100 07005300 07307000 02438900 05947900 06529700 02423651 06529800 05947500 02434851 01213100 02457400 06437200 01103100 02453751 06530300 01026000 06436500 06707000 08309400 05503700 02442800 08317200 07412100 02435300 06707400 02434751 02435400 02411000 06530400 07411600 06306800 06533200 02483100 21533500 07531800 07532000 05502100 07533200 06436700 06529200 06307400 Qty. 1 2 1 1 1 1 1 1 1 1 3 1 1 2 2 1 2 2 1 1 2 1 1 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 3 3 1 1 1 1 1 1 1 1 1 3 3 Description Key-Straight .25 x 1.75 x .25 Screw-Tap .25-20 x .50 Belt Cover V-Belt (116) V-Belt (117, 300, 508, 507) V-Belt (505) V-Belt (506) Pulley-V 8.40 x 1.0 with Key V-Belt -Traction Drive (116, 117, 300, 507, 508) V-Belt -Traction Drive (505, 506) Bolt-Serrated Round Head Slotted .31-18 x .75 Pulley-V 9.0 x 1.25 Hub (116, 117, 300, 505, 506, 508) Bolt-Hex .25-20 x .50 Grade 5 (117, 300, 505, 506, 507, 508) Nut-Locking-Center .25-20 (117, 300, 505, 506, 507, 508) Belt Retainer (117, 300, 505, 506, 507, 508) Nut-Locking Center .31-18 Bolt-Hex .31-18 x 1.25 Grade 5 Idler Arm Bearing Spacer Idler Washer-Flat-Steel .34 x .69 x .065 Spacer Idler Arm Nut-Locking-Nylon .63-18 Wave Washer Washer-Flat-Steel .38 x .81 x .023 Pin-Cotter .09 x 1.00 Spring-Tension .80 x .73 x 3.06 Bushing-Flange-Nylon .50 x .63 x .31 x .75 Activating Shaft Spring-Tens .05 x .44 x 3.37 Screw-Tapping 10-24 x .38 Return Clip Pin-Cotter .09 x .50 Bracket Pin-Clevis Belt Finger Nut-Locking-Flange .31-18 (116, 117, 300, 506, 507, 508) Screw-Tap .25-20 x .37 Washer-Lock-External .26 x .50 x .026 (300, 505, 506, 508) Nut-Hex .25-20 (300, 505, 506, 508) Cord-Extension-110V (116, 117) Plug-Spark Fuel Cap Key, Push/Pull-Tecumseh (116, 117) Bushing-Flange .50 x.63 x.50 x.75 Boot, Eyelet Terminal (300, 505, 506, 508) Washer-Flat-Steel .32 x .63 x .062 Nut-Hex .31-18 Washer-Locking .31 x .097 Heavy 7 SPEED SELECTOR AND FRAME Model 924116, 117, 300, 505, 506, 507, 508 1 2 4 5 6 3 14 11 12 9 10 13 15 16 28 18 27 17 23 20 7 21 26 22 8 19 24 25 24 PS0486 8 SPEED SELECTOR AND FRAME Model 924116, 117, 300, 505, 506, 507, 508 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Part No. 07533500 02492551 05962900 08335700 06435900 06529600 06529800 07028500 06219800 06537500 06713500 02492800 02487700 02493000 06706900 06436500 01215100 02476300 02485359 02401800 02483500 05531500 05947500 07411600 07411500 02477159 06437200 06441900 06707300 Qty. 1 1 1 1 1 1 1 2 2 2 1 1 1 1 1 1 1 1 1 2 2 1 1 2 4 1 1 1 1 Description Knob, Ball-Black 1-.41, .38-16 Lever, Shift-Weldment Bolt-Hex .38-16 x 2.25 Grade 5 Spring-Compression .13 x .78 x 1.25 Washer-Flat-Steel .44 x 1.00 x .083 Nut-Locking-Center .38-16 Nut-Locking-Center .31-18 Bolt-Hex Flanged Whiz Lock Head .38-16 x .75 Bolt-Round Head Square Neck .25-20 x 1.00 Grade 5 Nut-Locking Wing .25-20 Pin-Hair Internal .08 x .18 x 1.18 Rod, Shift-Upper Rod, Shift-Lower Pivot, Rod Pin-Cotter .09 x .75 Washer-Flat-Steel .38 x .81 x .023 Clevis Pin .37/.38 x .69 Arm, Shift Main Frame Bolt Strap (116, 117, 300, 507, 508) Bolt Strap (505, 506) Bushing-Sleeve .33 x .50 x .75 Bolt-Hex .31-18 x 1.25 Grade 5 Screw-Tapping .25-20 x .37 Hex Washer Head Screw-Tapping .31-18 x .50 Hex Washer Head Cover, Bottom Washer-Flat-Steel .34 x .69 x .065 Washer-Flat-Steel .53 x 1.06 x .095 Pin-Cotter .12 x .75 9 WHEELS AND AXLE Model 924116 1 12 3 13 8 14 10 2 8 11 7 9 6 5 33 10 8 4 11 13 PS0800 9 8 Model 924117, 300, 505, 506, 507, 508 18 16 27 19 3 14 23 28 22 21 29 20 15 31 30 26 25 35 37 32 24 36 34 17 38 39 33 PS0790 10 WHEELS AND AXLE Model 924116, 117, 300, 505, 506, 507, 508 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 Part No. Qty. 07150300 2 07150500 2 07121800 2 07121600 2 02483200 1 05718400 1 02439600 1 06600800 1 06436900 4 00301700 2 05409300 2 01014200 2 07053700 2 06529700 6 07103700 2 07108700 2 07107600 2 07107700 2 07121900 2 07121700 2 02437151 1 02440951 1 52405400 AR 52405500 AR 02437051 1 02441051 1 05505700 1 06307000 1 07012600 1 05502900 1 52405900 1 01037400 1 08300700 1 01037200 1 05948100 1 06530900 1 05803200 1 01037500 1 52405300 1 05803000 1 07412200 8 02457859 2 05417700 2 06437400 2 07028600 8 06530100 8 Description Tire/Wheel Assembly 16 x 6.50 - 8 (116) Wheel 6.50 x 8.00 (116) Tire 4.80-8 (117, 300) Tire 16 x 6.50-8 (116, 505, 506, 507, 508) Shaft, Axle (116) Ring, Retaining .88 x .05 (116) Spur Gear (116) Woodruff Key .25 x .88 x .38 (116) Washer-Flat-Steel .88 x 1.25 x .062 (116) Bearing Flange (116) Bearing, Ball .88 x 1.75 x .50 (116) Flange, Bearing (116) Pin-Lock .31 x 1.75 (116) Nut-Locking-Center .25-20 (116) Tube 4.00 x 8 (117, 300) Tube 6.50 x 8 (116, 505, 506, 507, 508) Wheel 4.80-8 (117, 300) Wheel 6.50-8 (505, 506, 507, 508) Tire/Wheel Assembly #34-4.80/4.00 x 8 (117, 300) Tire/Wheel Assembly #35-16 x 6.50 (505, 506, 507, 508) Axle-Right Hand (505, 506) Axle-Right Hand (117, 300, 507, 508) Axle Assembly-Left Hand (Contains Items 19-23) (505, 506) Axle Assembly-Left Hand (Contains Items 19-23) (117, 300, 507, 508) Axle-Left Hand (505, 506) Axle-Left Hand (117, 300, 507, 508) Bushing-Sleeve .75 x .81 x .75 (117, 300, 505, 506, 507, 508) Washer-Locking .25 x .05 (117, 300, 505, 506, 507, 508) Fitting-Lube .25-28 x .26 (117, 300, 505, 506, 507, 508) Bushing-Sleeve .56 x .63 x .63 (117, 300, 505, 506, 507, 508) Lockout Hub Assembly (Contains Items 25-27, 30, 31) (117, 300, 505, 506, 507, 508) Pin (117, 300, 505, 506, 507, 508) Spring-Compression .03 x.34 x 1.06 (117, 300, 505, 506, 507, 508) Lockout Hub (117, 300, 505, 506, 507, 508) Screw-Cap .25-20 x 2.00 Grade 8 (117, 300, 505, 506, 507, 508) Nut-Jam-Nylon .25-20 (117, 300, 505, 506, 507, 508) Pin-Roll .09 x 1.00 (117, 300, 505, 506, 507, 508) Knob (117, 300, 505, 506, 507, 508) Differential Assembly (117, 300, 505, 506, 507, 508) Pin Roll .19 x 1.50 Screw-Tap .50-20 x .62 Hex Head (117, 300, 505, 506, 507, 508) Bearing Retainer (117, 300, 505, 506, 507, 508) Bearing-Ball 1.13 x 2.19 x .63 (117, 300, 505, 506, 507, 508) Washer-Flat-Steel 1.14 x 1.72 x .13 Bolt Serrated Neck Slotted .25-20 x .50 Nut-Locking-Flange .25-20 11 REDUCTION DRIVE Model 924116, 117, 300, 505, 506, 507, 508 6 5 7 10 4 9 8 3 11 2 2 17 12 16 23 13 14 22 1 22 14 24 15 21 20 19 14 18 PS0463 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Part No. 02477300 06437200 02476800 05531600 06436600 00308500 05435200 02414100 06530600 06536400 05718300 07530500 06529800 06436100 02436700 02477700 07029700 05802900 05800900 52403200 02436800 05502600 06435700 06536100 Qty. 1 2 1 1 1 1 1 1 4 1 1 1 1 6 1 1 1 1 1 1 1 2 2 1 Description Hex Shaft Washer-Flat-Steel .34 x .69 x .065 Hex Shaft Spacer .45 x .75 x 1.60 Washer-Flat-Steel .51 x .88 x .072 Bearing Flange Bearing-Ball .44 x 1.38 x .44 Bearing Flange Nut-Locking Dual Face 10-24 Nut-Locking-Center .44-14 Ring-Retaining External .31 x .025 Idler Nut-Locking-Center .31-18 Washer-Flat-Steel .630 x 1.01 x .062 Pinion Shaft Roller Chain #41-34 Pitches Drive Fitting-Hydraulic Pin Roll .16 x 1.00 Pin, Roll .13 x 1.00 Pinion and Sprocket Assembly (Contains Items 21, 22) Pinion and Sprocket Bushing-Flange .63 x .75 x .50 x .88 Washer-Flat-Steel .38 x .88 x .083 Nut, Jam .31-18 12 FRICTION WHEEL DRIVE Model 924116, 117, 300, 505, 506, 507, 508 13 12 7 14 11 7 3 9 5 8 2 6 10 16 4 18 19 24 1 20 22 15 17 25 23 1 21 26 20 PS0452 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Part No. Qty. 07411500 8 02445500 1 00300300 1 02445400 1 05702100 1 06436900 1 05502600 2 05512600 1 06530500 1 05409300 1 02444500 1 52404600 AR 02477000 1 05802900 2 01054600 1 02407100 1 02407600 1 06600600 1 02458200 1 05435100 2 02415500 1 00303400 1 06437200 1 06308600 1 05946900 1 02458100 1 Description Screw-Tapping .31-18 x .50 Spindle Hub Friction Disc Disc Hub Ring-Retaining-Internal 1.75 x .062 Washer-Flat-Steel .88 x 1.25 x .062 Bushing-Flange .63 x .750 x .50 x .88 Bushing-Sleeve .88 x 1.25 x .53 Nut-Locking-Nylon .88-14 Bearing-Ball .88 x 1.75 x .50 Carrier Friction Wheel Assembly (Contains 1-11) Carrier Shaft Pin-Roll .16 x 1.00 Drive Plate Drive Disc Spacer 1.30 x .76 x .19 Spindle Key-Woodruff .13 x .50 x .20 Housing Mount Bearing .63 x 1.38 x .43 Bearing Spacer Roller Washer-Flat-Steel .34 x .69 x .065 Washer-Lock .31 x .078 Bolt-Hex .31-18 x 1.00 Grade 5 Spindle Housing 13 HANDLEBARS, LEVER CONTROLS, PANEL AND DASH Model 924116, 117, 300, 505, 506, 507, 508 14 14 13 2 9 17 16 15 Rear View 13 17 16 17 16 3 1 20 18 11 22 7 10 8 12 25 26 6 27 24 7 19 5 4 28 21 23 PS0813 14 HANDLEBARS, LEVER CONTROLS, PANEL AND DASH Model 924116, 117, 300, 505, 506, 507, 508 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Part No. Qty. Description 52415100 52415200 02491651 06212100 06529800 06220100 06529700 02491851 07511800 02486451 05952500 06529700 02493100 02493200 06437200 02492100 05803400 52415300 52415400 52415500 52415600 52415700 52415800 52415900 07511200 02485000 07416700 06214300 06221600 06446800 06307400 06439400 07531700 07028500 1 1 1 2 2 2 7 1 2 1 2 2 1 1 4 2 4 AR AR AR AR AR AR AR 1 1 3 5 4 4 4 4 4 4 Handlebar, Upper Right Hand (Includes Hand Warmer) Handlebar, Upper Left Hand (Includes Hand Warmer) Panel, Sub-Weldment Bolt-Round Head Square Neck .31-18 x 1.50 Grade 5 Nut-Locking-Center .31-18 Bolt-Round Head Square Neck .25-20 x 1.25 Nut-Locking-Center .25-20 Handlebar, Lower Bumper Bracket, Cable Support (116, 505, 506) Bolt-Hex .25-20 x 1.50 Grade 5 (116, 505, 506) Nut-Locking-Center .25-20 (116, 505, 506) Lever, Right Hand-Coated Lever, Left Hand-Coated Washer-Flat-Steel .34 x .69 x .065 Cam, Interlock Pin-Roll .125 x .75 Panel with Decal - 936 (507) Panel with Decal - 1024 (117) Panel with Decal - 1028 (116) Panel with Decal - 1332 (505) Panel with Decal - 1024 (300) Panel with Decal - 1128 (508) Panel with Decal - 1336 (506) Bushing, Snap (116, 117, 300, 508) Headlamp, Oval with 1156 Bulb Screw-Tapping 10-16 x .75 Hi-Lo Bolt-Round Head Square Short Neck.25-20 x .50 Bolt-Round Head Square Neck .31-18 x 2.25 Washer, Saddle-.32 x .94 x .062 Washer-Locking .31 x .097 Heavy Washer-Flat-Steel .33 x .88 x .062 Knob- Wing .31-18 Bolt-Screw Hex Flanged Whiz Lock Head .38-16 x .75 15 CABLES AND CONTROLS Model 924116, 117, 300, 505, 506, 507, 508 11 12 13 11 9 1 10 1 12 13 5 4 6 4 8 10 5 8 3 3 2 7 Rear View 15 7 8 6 9 2 13 12 18 24 19 20 14 26 25 22 21 23 16 27 17 29 28 30 32 16 31 PS0880 CABLES AND CONTROLS Model 924116, 117, 300, 505, 506, 507, 508 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 Part No. 08337100 02492200 05970400 05957800 06529600 06436200 08320900 02463900 01123800 02492300 08337000 07533500 06437300 06437300 06707400 06707400 06947500 06947400 02485551 05802600 06530200 01054200 02422700 05947000 02422800 06529800 02408600 06005500 02213500 52404700 06707400 06707000 02406900 08309400 02427200 Qty. 2 1 1 1 1 1 1 1 2 1 1 1 2 3 2 3 1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 2 1 1 1 Description Spring-Tension .056 x .50 x 3.76 Arm, Interlock Bolt-Hex .38-16 x 4.50 Grade 5 (116, 505, 506) Bolt-Hex .38-16X3.00 Grade 5 (117, 300, 507, 508) Nut-Locking-Center .38-16 Washer-Flat-Steel .41 x .81 x .065 (116, 505, 506) Spring-Compression .19 x .56 x 1.62 (116, 505, 506) Pressure Flange (116, 505, 506) Washer, Friction (116, 505, 506) Lever, Deflector (116, 505, 506) Spring-Tension .05 x .44 x 38 x 1.45 Knob, Ball-Black 1-.41, .38-16 (116, 505, 506) Washer-Flat-Steel .28 x .62 x .065 (117, 300, 507, 508) Washer-Flat-Steel .28 x .62 x .065 (116, 505, 506) Pin-Cotter .09 x .50 (117, 300, 507, 508) Pin-Cotter .09 x .50 (116, 505, 506) Cable, Auger Cable, Traction Lever, Clutch Pin-Roll .16 x .88 Nut-Locking-Nylon .31-18 Spacer, Adapter Adapter Bolt-Hex .31-18 x .75 Grade 5 Yoke, Clutch Engagement Nut-Locking-Center .31-18 Spacer 1.00 x .64 x .38 Screw-Set .31-18 x .38 Socket Head Rod Adapter Spring Assembly Pin-Cotter .09 x .50 Pin-Cotter .09 x 1.00 Rod, Fork Pivot Spring-Tension .08 x .73 x 3.06 Weldment Clutch Fork 17 CHUTE, AUGER AND BATTERY Model 924116, 117, 300, 505, 506, 508 56 15 17 55 12 58 54 14 60 7 18 7 17 15 16 30 22 43 20 6 5 1 46 45 8 51 36 53 48 47 52 49 22 21 13 36 11 50 2 13 31 36 44 42 57 24 37 32 34 38 59 40 30 29 25 33 19 10 3 4 35 10 41 26 39 9 25 23 35 28 27 PS0437 18 CHUTE, AUGER AND BATTERY Model 924116, 117, 300, 505, 506, 508 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Part No. Qty. Description 04912900 1 A/R 1 1 2 6 2 2 1 4 10 1 1 4 1 2 1 2 1 2 1 1 1 1 1 1 2 2 4 5 5 7 6 1 1 1 1 1 7 9 8 4 1 1 1 1 1 1 1 1 1 1 Cover, Battery (300, 505, 506, 508) Battery Recommend 340 to 350 CCA at 0° F. Size U1R or U1L (300, 505, 506, 508) Battery Tray (506) Battery Tray (300, 508, 505) Bolt-Round Head Square Neck .25-20 x 7.00 (300, 505, 506, 508) Washer-Flat-Steel .28 x .62 x .065 (300, 505, 506, 508) Wing Nut-Locking .25-20 (300, 505, 506, 508) Washer-Flat-Steel .41 x .81 x .065 (300, 505, 506, 508) Solenoid (300, 505, 506, 508) Bolt-Hex .25-20 x .75 Grade 5 (300, 505, 506, 508) Nut-Lock-Flange .25-20 Cover, Solenoid (300, 505, 506, 508) Rod, Chute (116, 505, 506) Washer-Flat-Steel .44 x 1.00 x .083 Spring, Compression (116, 505, 506) Washer-Flat-Steel .28 x .62 x .065 (116, 505, 506) Wave Washer (117, 300, 508) Ring, Retaining-External .22 x .035 (116, 505, 506) Washer-Plastic .39 x .88 x .062 (117, 300, 508) Screw-Tapping .25-20 x .50 Hex Washer Head (300, 505, 506, 508) Blower Housing w/Decal 28" (116) Blower Housing w/Decal 24" (117) Blower Housing w/Decal 24" (300) Blower Housing w/Decal 28" (508) Blower Housing w/Decal 32" (505) Blower Housing w/Decal 36" (506) Runner, Skid Shoe-1/2" Flange (117, 300, 508, 505, 506) Runner, Double Flange (116) Nut-Locking .38-16 (116, 505, 506) Nut-Locking .38-16 (117, 300, 508) Washer-Flat-Steel .38 x .88 x .083 (116, 117, 300, 508) Washer-Flat-Steel .38 x .88 x .083 (505) Washer-Flat-Steel .38 x .88 x .083 (506) Scraper Blade 28" (116) Scraper Blade 24" (117, 300) Scraper Blade 28" (508) Scraper Blade 32" (505) Scraper Blade 36" (506) Nut-Locking-Center .31-18 (116, 117, 300, 508) Nut-Locking-Center .31-18 (505) Nut-Locking-Center .31-18 (506) Fitting-Lube .25-28 x .256 Rake, Left Hand - 28" (16" O.D.) (508) (Includes Item 26) Rake, Right Hand - 28" (16" O.D.) (508) (Includes Item 26) Rake, Right Hand - 24" (16" O.D.) (117, 300) (Includes Item 26) Rake, Left Hand - 24" (16" O.D.) (117, 300) (Includes Item 26) Rake, Left Hand - 28" (15" O.D.) (116) (Includes Item 26) Rake, Right Hand - 28" (15" O.D.) (116) (Includes Item 26) Rake, Left Hand - 32" (16" O.D.) (505) (Includes Item 26) Rake, Right Hand - 32" (16" O.D.) (505) (Includes Item 26) Rake, Left Hand - 36" (16" O.D.) (506) (Includes Item 26) Rake, Right Hand - 36" (16" O.D.) (506) (Includes Item 26) 02484559 02488659 06220400 06437300 06537500 06436200 03679000 05946800 06530100 02484459 02479800 06435900 08335200 06437300 01320200 05718500 06416800 07412000 52414200 52414300 52414400 52414500 52414600 52414700 02483059 02483859 06529600 06529600 06435700 06435700 06435700 02479159 01016459 00620159 00620859 03519259 06529800 06529800 06529800 07012600 52410700 52410800 52413600 52413500 52411800 52411900 52412200 52412300 52412500 52412600 19 AUGER AND BATTERY Model 924116, 117, 300, 505, 506, 508 Item Part No. 28 51001500 29 00301700 03086200 30 06211800 06211800 31 06212000 32 05418200 05406300 33 07028600 34 06212200 06212200 06212200 35 06436300 36 06529700 37 02437451 38 05503500 39 06436400 40 06306600 41 05947100 42 08316400 43 06441100 44 02440551 45 02448100 46 06707500 47 05946800 48 52404800 49 02217800 50 06806700 51 07028500 52 07002600 53 01014200 03086100 54 06437200 55 06945400 56 52411000 52414800 57 05947900 58 06908200 59 07533200 60 52410900 61 06308400 Qty. 2 1 1 2 3 3 1 1 6 5 7 6 4 6 2 2 2 2 2 1 1 1 1 1 1 1 1 2 2 2 1 1 1 1 1 1 2 1 2 1 2 Description Shear Bolt Service Assembly (Includes Item 25) Bearing Flange (116,117, 300, 508, 505) Bearing Flange (506) Bolt-Round Head Square Neck .38-16 x .75 (116, 505, 506) Bolt-Round Head Square Neck .38-16 x .75 (117, 300, 508) Bolt-Round Head Square Neck .38-16 x 1.00 Bearing-Ball 1.0 x 2.0 x .56 (506) Bearing-Ball .75 x 1.75 x .50 (116, 117, 300, 505, 508) Bolt-Serrated-Neck-Slotted .25-20 x .50 Bolt-Round Head Square Neck .312-18 x .62 (116, 117, 300, 505, 508) Bolt-Round Head Square Neck .312-18 x .62 (505) Bolt-Round Head Square Neck .312-18 x .62 (506) Washer-Flat Steel 1.01 x 1.51 x .062 Nut-Locking-Center .25-20 Bearing Support Bushing-Flange 1.00 x 1.12 x .62 x 1.50 Washer-Flat-Steel .51 x 1.44 x .13 Washer-Lock .50 x .151 Bolt-Hex .50-13 x 1.00 Grade 5 Spring-Tension .06 x .56 x 8.00 Washer-Flat-Steel .52 x .83 x .062 (117, 300, 508) Arm Extension (116) Clevis Pin Pin-Cotter .06 x .75 Bolt-Hex .25-20 x .75 (116) Brake Arm Assembly (Contains Items 49, 50) Brake Lining Rivet-Tubular .19 x .44 Bolt-Hex Flanged Whizloc Head .38-16 x .75 Nut-Retainer .38-16 Bearing Flange (116, 117, 300, 505, 508) Bearing Flange (506) Washer-Flat-Steel .34 x .69 x .065 (116, 505, 506) Cable, Control (116, 505, 506) Chute, Discharge with Remote (116) Chute- Electric (505, 506) Bolt-Hex .25-20 x .50 Grade 5 Clamp-Cushioned (116, 505, 506) Boot, Eyelet Terminal (300, 505, 506, 508) Chute, Discharge without Remote (117, 300, 508) Washer-Locking .25 x.06 Regular 20 GEAR CASE-ALUMINUM Model 924116 8 2 4 5 7 10 12 3 11 24 6 1 13 14 15 13 26 16 11 17 25 21 9 21 22 18 19 23 17 20 19 PS0692 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Part No. Qty. 05803700 2 02477251 1 05618900 1 05511200 1 03210300 1 05804500 1 06600100 1 52413400 AR 07412900 1 06219700 2 05618800 2 02470600 1 05530100 2 52402600 1 00925700 1 02470700 1 06530100 4 07413000 2 05803000 2 05806900 1 06416600 2 05520600 1 02479300 1 06219800 2 06442500 1 00008000 1 Description Pin-Roll .25 x 1.75 Impeller-.75 I.D.x 12" O.D. Seal, Oil .75 x 1.38 x .31 Bushing-Flange .75 x 1.00 x .75 x 1.25 Thrust Collar Pin-Groove .19 x 1.25 Key-Woodruff .19 x .88 x .38 Case, Gear-Large Bore-28" (Contains Items 3-6, 9-18, 20-25) Screw-Tapping .38-16 x .50 Bolt-Round Head Square Neck .25-20 x 1.25 Grade 5 Seal 1.00 x 1.38 LS Case Half Left Hand Large Bore Bushing-Flanged 1.00 x 1.12 x 1.50 x .50 Worm Shaft and and Gear Assembly Locktite Gasket 518 850 cc Cartridge LS Case Half Right Hand Large Bore Nut-Locking-Flange .25-20 Screw-Tapping 10-24 x .75 Pin-Roll .19 x 1.50 Pin-Groove .31 x 1.44 Washer-Flat-Steel 1.01 x 1.54 x .062 Bushing-Flange .50 x 1 x .75 Rake Shaft 28" Bolt-Round Head Square Neck .25-20 x 1.00 Washer-Fiber .44 x .66 x .032 Ariens 16 Oz. Bottle of L2 Lube (2 oz. capacity) 21 GEAR CASE-CAST IRON Model 924117, 300, 505, 506, 508 2 1 3 31 1 5 30 4 7 9 11 6 9 8 12 29 10 13 14 15 8 19 27 11 28 26 26 18 17 16 27 25 20 23 21 22 19 13 24 PS0472 22 GEAR CASE-CAST IRON Model 924117, 300, 505, 506, 508 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Part No. Qty. 05801500 2 02476951 1 00643151 1 06600100 1 02437500 1 02406200 1 06601300 1 02401500 1 05606100 1 05404400 2 05404500 2 00200500 2 52400900 1 05707500 1 05607000 2 00113800 1 00403700 1 05947000 1 06307400 1 06437500 1 06600800 2 02472100 1 02459600 1 02406500 1 03519500 1 05803000 2 05946800 4 06306800 4 02401300 1 00200800 1 05505900 2 06408700 2 02406400 1 02400200 1 52408000 AR 52403500 AR 00008000 1 Description Pin-Roll .31 x 1.75 Impeller -1.00 I.D. x 14" O.D. (506) Impeller -1.00 I.D. x 12" O.D. (117, 300, 508, 505) Key-Woodruff .19 x .88 x .38 Worm Shaft-1.00” Diameter (506) Worm Shaft-1.00” Diameter (117, 300, 508, 505) Key-Square .19 x 1.00 x .19 Adjustment Plug Seal 1.00 x 1.31 x .15 Bearing-Cup 1.78 x .48 Bearing-Cone .75 x .61 Bearing Spacer 1.12 x 1.52 x .5 Worm and Gear Service Assembly Ring-Retaining-Internal 1.78 x .062 Seal 1.63 x 2.13 x .25 Pipe Plug Dust Cap Bolt-Hex .31-18 x .75 Grade 5 Washer-Lock .31 x .10 Washer-Flat-Steel .33 x 1.00 x .09 Key-Woodruff .25 x .88 x .38 Rake Shaft 24" 1.00 Diameter (117, 300) Rake Shaft 28" 1.00 Diameter (508) Rake Shaft 32" 1.00 Diameter (505) Rake Shaft 36" 1.00 Diameter (506) Pin-Roll .19 x 1.50 Bolt-Hex .25-20 x .75 Grade 5 Washer-Lock-External .26 x .50 x .026 Gear Case Cover Gasket Bushing-Flange 1.63 x 1.87 x 1.68 x 2.25 Washer-Flat-Steel 1.63 x 2.50 x .01 Gear Case Shaft Gear Case- Cast Iron Gear Case- Cast Iron (117, 300, 505, 508) Gear Case, 32"- Cast Iron (506) Ariens 16 oz. Bottle of L2 Lube (5 oz. capacity) 23 DISCHARGE CHUTE CRANK Model 924116, 117, 300, 508 4 1 2 5 3 6 24 23 4 21 11 6 30 29 10 12 22 9 8 31 7 43 32 13 924117, 300, 508 14 34 36 38 28 39 15 16 17 35 18 37 33 924116 25 34 28 26 19 20 16 27 41 40 42 PS0604 24 DISCHARGE CHUTE CRANK Model 924116, 117, 300, 508 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 Part No. 01019800 07508300 02490700 07412000 03223000 06714500 03222900 06224400 53204400 06436100 03220551 03224300 03220751 06439300 01123800 02480351 03219000 08320900 06436200 06529600 02492451 05947900 06437300 06529700 05947500 06307400 06437200 06435800 02479700 02470400 06308400 06533200 06215700 06529800 06437300 02480751 02480900 05946800 06308400 05947000 03233600 02480251 06219900 Qty. 1 1 1 4 1 3 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 2 2 2 2 2 2 2 1 1 1 1 2 2 4 1 4 4 4 2 2 1 1 Description Cap, .38 Rod Knob Crank, Chute Screw .25-20 x .50 Hex Washer Head Self Tapping Cover, Gear Pin-Spring Clip Gear, Chute Bolt-Round Head Square Neck .38-16 x 2.50 Grade 5 Pinion Gear w/Bracket (Contains Items 10-12) Washer-Flat-Steel .63 x 1.01 x .062 Bracket, Gear Push Nut Gear Strap Washer-Flat-Steel .38 x 1.50 x .062 Friction Washer Bracket, Chute Support Friction Plate Spring-Compression .19 x .56 x 1.62 Washer-Flat-Steel .41 x .81 x .065 Nut-Locking-Center .38-16 Bracket, Chute Crank Support Bolt-Hex .25-20 x .50 Grade 5 Washer-Flat-Steel .281 x .62 x .065 Nut-Locking-Center .25-20 Bolt-Hex .31-18 x 1.25 Grade 5 (116) Washer-Locking .31 x .08 Regular (116) Washer-Flat-Steel .34 x .69 x .065 (116) Washer-Flat-Steel .31 x .73 x .065 Pin, Connector Universal Joint Washer-Locking .25 x .062 Nut-Hex .25-20 Bolt-Round Head Square Neck .31-18 x .75 Nut-Locking-Center .31-18 Washer-Flat-Steel .28 x .62 x .065 (117, 300, 508) Bracket, Engine (117, 300, 508) Spacer, Tube (117, 300, 508) Bolt-Hex .25-20 x .75 Grade 5 (117, 300, 508) Washer-Locking .25 x .06 x .065 (117, 300, 508) Bolt-Hex .31-18 x .75 Grade 5 (116) Spacer, Tube (116) Bracket, Engine (116) Bolt-Round Head Square Neck .25-20 x .75 Grade 5 25 ELECTRIC DISCHARGE CHUTE Model 924505, 506 2 1 4 3 5 8 6 7 3 9 13 10 12 11 PS0860 26 ELECTRIC DISCHARGE CHUTE Model 924505, 506 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 Part No. 02486959 06530100 07411900 02487100 05947400 02488251 52416500 06437300 02487000 02486800 07414400 06529700 02485159 Qty. 2 6 3 1 1 1 1 1 3 1 2 1 1 Description Ring, Cover Nut-Locking-Flange .25-20 Screw-Tapping 12-24 x .50 Hex Washer Head Cover, Motor Bolt-Hex .25-20 x 1.25 Grade 5 Bracket, Electric Motor Motor, Electric Right Hand- Chute Washer-Flat-Steel .28 x .62 x .065 Clamp, Chute Gear, Chute Screw-Tapping .31-18 x.75 Hex Washer Head Nut-Locking-Center .25-20 Housing, Blower-32" E 27 BRUSH HEAD Model 924507 20 33 20 4 15 31 9 23 32 34 25 23 36 20 2 19 18 19 23 25 3 23 23 30 24 23 35 28 7 11 7 14 1 12 10 13 10 8 27 12 14 5 21 12 16 26 22 6 29 23 37 24 23 17 8 PS0592 28 BRUSH HEAD Model 924507 Item Part No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 Qty. 01061300 1 01060900 1 02468300 1 05946800 2 05946900 4 05963700 2 05957900 2 05947000 16 06437300 2 06435800 8 06308400 2 06308600 20 06533200 2 06529200 20 02468400 1 02468500 2 07109400 2 02468600 1 06529600 2 02468700 5 02468800 2 00547800 2 02411300 8 05423400 2 05409700 2 01062900 1 02469000 1 02469100 1 02469200 2 02469300 1 02469400 1 02469500 1 02469600 1 02469700 1 02469800 1 02469900 1 02470000 1 Description Chain Tightener Sprocket Chain, Assembly #40 x 106 Bolt-Hex .25-20 x .75 Grade 5 Bolt-Hex .31-18 x 1.00 Grade 5 Bolt-Hex .31-18 x 2.25 Grade 5 Bolt-Hex .38-16 x 1.50 Grade 5 Bolt-Hex .31-18 x .75 Grade 5 Washer-Flat-Steel .28 x .62 x .065 Washer-Flat-Steel .31 x .73 x .065 Washer-Lock .25 x .062 Regular Washer-Lock .31 x .078 Regular Nut-Hex .25-20 Nut-Hex .31-18 Pin, Spring Lok .19 x 1.25 Nut, Lok Stamped .31-18 Wheel, 5 inch Diameter Spring, Tension .50 x 3.00 Nut-Locking-Center .38-16 Screw, Gear 10.9 M6 x 1-20 Lanyard .06 Cable 1.25 x 6 Pin, Hitch .38 x 2 Flange, Spherical 2 inch Bearing 1.00 Bore, Spherical Bearing-Ball .84 Hex x 52 MM x 1.07 Retainer Plate Weldment, Core Arm, Idler Weldment, Caster Leg Bushing .62 x 12 Gauge x .75 Shield, Chain Shield Chain Top Weldment, Head Shield, Input Weldment, Broom Frame Shaft, Hex 20.5 with Hole Set, 24 Section 29 BRUSH DRIVE UNIT Model 924507 21 6 1 23 2 8 21 7 3 4 17 5 10 2 9 36 12 32 26 35 4 10 2 31 34 24 3 10 46 32 28 27 1 25 11 15 13 14 30 33 15 16 20 22 19 18 29 14 42 44 41 40 43 37 38 39 41 45 PS0581 30 BRUSH DRIVE UNIT Model 924507 Item Part No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 05947500 02404800 06307200 02404900 02471751 02470900 00597000 02470151 02405051 06529800 06215700 02471851 06418500 05409700 02429600 02447600 06436800 02429100 02495500 05803000 05961100 01062000 06436200 06529600 02429451 07028500 07002600 05959400 05805600 06529600 02400400 06600300 05958000 02429800 06001100 01207800 02429551 06308800 06529400 50202100 06005500 07005300 06530400 07307000 07210800 06435700 Qty. 4 4 4 2 1 1 1 1 1 4 4 1 2 2 4 1 1 1 1 1 3 1 1 3 1 2 2 4 1 4 1 2 2 1 2 1 1 2 2 1 2 3 3 1 1 4 Description Bolt-Hex .31-18 x 1.25 Grade 5 Retainer Washer-Locking-Internal .313 x .030 Pivot, Center Plate, Top Mount T-Lock Handle Washer-Cupped Serrated .38 Guard, Shaft Frame, Adapter Nut-Locking-Top .31-18 Bolt-Round Head Square Neck .31-18 x .75 Grade 5 Plate, Bottom Mount Washer-Flat-Steel 1.02 x 1.50 x .125 Bearing, Ball Flange, Bearing Spacer 1.01 x 1.31 x .50 Washer-Flat-Steel .39 x .88 x .18 Shaft Joint, Universal Pin-Roll .19 x 1.50 Bolt-Hex .38-16 x 3.25 Grade 5 Sprocket Washer-Flat-Steel .41 x .81 x .065 Nut-Locking-Center .38-16 Plate, Mounting Bolt, Hex Flanged Whizloc Head .38-16 x .75 Nut-Retainer .38-16 Bolt-Hex .38-16 x .75 Grade 5 Pin-Roll .19 x 1.75 Nut-Locking-Center .38-16 Gear Box Assembly Key-Woodruff .19 x .75 x .31 SAE 9 Bolt-Hex .38-16 x 1.25 Grade 5 Sprocket Screw-Set .25-20 x .25 Socket Head Cup Point Chain Plate, Stiffener Washer-Lock .38 x .094 Nut-Hex .38-16 Hub Assembly Screw-Set .31-18 x .38 Socket Head Cup Point Bolt-Serrated Round Head Slotted .31-18 x .75 Nut-Locking-Flanged .31-18 Pulley-V 9.00 x 1.25 V-Belt Washer-Flat-Steel .38 x .88 x .083 31 ELECTRICAL Model 924116, 117, 300, 505, 506, 507, 508 14 5 1 8 9 2 3 10 13 4 12 13 14 8 9 11 6 7 PS0891 tem 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Part No. Qty. 02460700 1 07517700 1 06517300 1 02739600 1 52709300 1 02494400 1 02494300 1 02494200 1 07517300 3 07517300 1 06403800 2 06403800 1 06310900 2 06310900 1 02485700 1 02485600 1 00524700 1 07532900 2 09207600 AR Description Key- with Cap (300, 505, 506, 508) Cap- Ignition Switch (300, 505, 506, 508) Nut-Panel .63-32 (300, 505, 506, 508) Ignition Switch Assembly (300, 505, 506, 508) Switch Assembly (Includes Items 1 thru 4) (300, 505, 506, 508) Harness, Wiring-Light and Hand Warmer (116, 117, 507) Harness, Wiring-Light and Hand Warmer 12V (300, 508) Harness, Wiring-Light and Hand Warmer Chute (505, 506) Cable Tie (300, 505, 506, 508) Cable Tie (116, 117, 507) Washer-Flat-Steel .51 x .88 x .024 (505, 506) Washer-Flat-Steel .51 x .88 x .024 (116, 117, 300, 507, 508) Washer-Locking-Internal .56 x .04 (505, 506) Washer-Locking-Internal .56 x .04 (116, 117, 300, 507, 508) Switch, On/Off Hand Warmer Switch, Chute Rotation (505, 506) 15 AMP Fuse Hand Warmer with Terminal (Recommend Fast Drying Epoxy for Installation) Boot, Switch (Optional) 32 CONTINUITY DIAGRAM Model 924300, 505, 506, 508 The diagrams below show the various states of connection for electrical components. The solid lines on switches show continuity. NOTE: All switches are viewed from the rear. Key Switch Hand Warmer Switch (02739600) (02485700) S G R B A M S G OFF R B A M S G RUN R M B A START HAND WARMER OFF Chute Motor Switch (Models 505, 506) Solenoid (Top View) (02485600) (03679000) NOT ENERGIZED HAND WARMER ON ENERGIZED LEVER LEFT CHUTE LEFT LEVER RIGHT CHUTE RIGHT PS0841 33 CONTINUITY AND WIRING DIAGRAMS Model 924116, 117, 507 HEAD LIGHT 1 1 2 2 BLACK HAND WARMER SWITCH 3 A.C. LIGHTING ENGINE YELLOW YELLOW BROWN/ORANGE BROWN/ORANGE YELLOW 4 D.C. CHARGE RED 1 1 2 2 RIGHT HAND WARMERS 1 1 2 2 LEFT BLACK PS0830 Item Part No. 1 2 3 4 Qty. 02485000 07532900 02488800 02485700 1 2 1 1 Description Headlamp, Oval with 1156 Bulb Warmer, Hand - with Terminal (Recommend Fast Drying Epoxy for Installation) Wire Harness-Hand Warmers and Light Switch, On/Off Hand Warmer The diagrams below show the various states of connection for electrical components. The solid lines on switches show continuity. NOTE: All switches are viewed from the rear. Hand Warmer Switch (02485700) HAND WARMER OFF HAND WARMER ON PS0820 34 WIRING DIAGRAM Model 924300, 508 HEAD LIGHT 1 1 2 8 BLACK 2 HAND WARMER SWITCH BROWN/ORANGE 5 A.C. LIGHTING YELLOW YELLOW ENGINE BROWN/ORANGE YELLOW D.C. CHARGE PURPLE RED MAGNETO 1 1 2 2 RIGHT HAND WARMERS 1 LEFT 2 WHITE / BLACK 1 2 M STARTER BLACK 2 BLACK RED 3 G A BATTERY RED R BLACK B RED 4 7 A B RED FUSE 15 AMP A 6 S COIL 2 KEY SWITCH COIL 1 BROWN STARTER SOLENOID BLACK Item Part No. 1 2 3 4 5 6 7 8 PS0672 Qty. 02485000 AR 07532900 2 AR 03679000 1 02494300 1 52709300 1 00524700 1 02485700 1 Description Headlamp, Oval with 1156 Bulb Warmer, Hand - with Terminal (Recommend Fast Drying Epoxy for Installation) Battery Recommend 340 to 350 CCA at 0° F. Size U1R or U1L Solenoid Wire Harness 12 Volt Switch Assembly 15 AMP Fuse Switch, On/Off Hand Warmer 35 WIRING DIAGRAM Model 924505, 506 HEAD LIGHT 1 1 2 2 BLACK BROWN/ORANGE A.C. LIGHTING 5 YELLOW YELLOW BROWN/ORANGE YELLOW ENGINE 8 HAND WARMER SWITCH D.C. CHARGE PURPLE RED MAGNETO WHITE / BLACK 1 1 2 2 RIGHT HAND WARMERS 1 1 2 2 LEFT M STARTER 2 BLACK 3 RED G A BATTERY CHUTE MOTOR SWITCH BLACK RED PURPLE 2 9 1 CHUTE MOTOR 4 R BLACK 5 7 B RED 4 A FUSE 15 AMP 3 6 B BLACK/VIOLET A VIOLET B RED A BLACK S COIL 2 COIL 1 BROWN 10 KEY SWITCH 6 STARTER SOLENOID BLACK Item Part No. 1 2 3 4 5 6 7 8 9 10 PS0850 Qty. 02485000 AR 07532900 2 AR 03679000 1 02488700 1 52709300 1 00524700 1 02485700 1 02485600 1 52416500 1 Description Headlamp, Oval with 1156 Bulb Warmer, Hand - with Terminal Recommend Fast Drying Epoxy for Installation Battery Recommend 340 to 350 CCA at 0° F. Size U1R or U1L Solenoid Wire Harness 12 Volt Switch Assembly 15 AMP Fuse Switch, Hand Warmer Switch, Chute Motor Motor, Electric Right Hand- Chute 36 Ariens Company 655 West Ryan Street P.O. Box 157 Brillion, WI 54110-0157 920-756-2141 Fax 920-756-2407 www.ariens.com