Transcript
LEXINGTON™ PEDESTAL SINK VITREOUS CHINA LEXINGTON™ PEDESTAL SINK • Minimalistic styled pedestal sink • Made from vitreous china • Rear overflow • Supplied with mounting kit • Faucet ledge Shown with 8871.902 Amarilis faucet with Lexington handles (not included) ❏ 0178.514 Faucet holes on 8" (203mm) centers (Illustrated) ❏ 0178.536 Center Hole only Nominal Dimensions: 616 x 464 x 867mm (24-1/4" x 18-1/4" x 34-1/2") Separate Components: ❏ 0178.027 Pedestal top-8" (203mm) centers ❏ 0178.152 Pedestal top-center hole only ❏ 730500-400 Pedestal only Bowl sizes: 445mm (17-1/2") wide 276mm (10-7/8") front to back 143mm (5-5/8") deep Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2M for Vitreous China Fixtures 203mm (8) 70mm (2-3/4) 102mm (4) 197mm (7-3/4) FINISHED WALL 464mm (18-1/4) PEDESTAL ANCHOR SCREW HOLES (2)10mm (3/8) DIA. 565mm (22-1/4) 610mm (24-1/4) 187mm (7-3/8) 19mm (3/4) DIA. HOLES FOR ANCHOR BOLTS 254mm (10) 10mm (3/8) DRAIN CHASE *330mm *286mm (13) To Be Specified: ❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Silver ❏ Fawn Beige ❏ Black ❏ Faucet*: ❏ Faucet Finish: ❏ Supplies: ❏ 1-1/4" Trap: (11-1/4) 876mm (34-1/2) 178mm (7) 203mm (8) SUPPLIES AS REQUIRED 1-1/4 O.D. WASTE OPEN TO FLOOR 1-1/4 O.D. TAILPIECE FINISHED FLOOR * See faucet section for additional models available 178mm (7) NOTES: * DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE SUGGESTED. ▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED. ■ SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST BE TAKE FROM FIXTURE. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS. INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. © 2008 AS America Inc. J5 Revised 2/08
