Download Shuttle POS01

Product Specification
COM3,COM4 (RJ45):
J1 (RJ11:6P6C) Cash Drawer:
RXD
TXD
DSR
DTR
5
6
7
8
Pin Signal Name
1 Ground (GND)
Drawer kick-out
2
drive signal 1
RTS
DCD
CTS
RI
3
Power 12V/24V,
Default 24V
4
Drawer open/ close
signal (input)
5
Drawer kick-out
drive signal 2
6
Ground (GND)
5. Tear off the adhesive membrane, fold and fix the adhesive ribbon cable to the chassis rail.
6. Tighten the POS01 COM/LPT Port with four screws.
7. Please connect the power connectors to "CON6" and connect the ribbon cable to "CON3", then
slide two latches into the lock position.
Page 3 | 19 December 2014
www.shuttle.com
Shu t tl e Computer Han dels GmbH
Fritz- Strassmann-S t r. 5
25337 Elmshorn | Germany
Tel. +49 (0) 4121-47 68 60
Fax +49 (0) 4121-47 69 00
[email protected]
© 2015 by Shuttle Computer Handels GmbH (Germany). All information subject to change without notice. Pictures for illustration purposes only.
1
2
3
4