Download Eminent EM4431 network switch
Transcript
3 | ENGLISH 2.0 Front and rear panel description 2.1 Front panel Figure 1-1 shows the front panel of the switch. Ports : These ports are connection points for PCs and other network devices, such as additional switches. 2.1.1 LED Indicator description You can see the switch’s work status by LED indicators. The following table shows these indicators function: LED PWR Status Description ON Power is supplied OFF No power A valid link is established ON Link Blinking OFF ON Data packets received No link is established There is a PoE PD (Powered Device) connected to the port, which supply power successfully. PoE OFF MAX 1(1-4 Ports) ON OFF MAX 2(5-8 Ports) ON OFF No PD port connect to the port, or the power is not enough to supply PoE device to work When the power output to PDs has reached or exceeded the maximum power. No additional PDs connected will be powered. When the system is using less than 55W or Higher than 70W When the power output to PDs has reached or exceeded the maximum power. No additional PDs connected will be powered. When the system is using less than 55W or Higher than 70W