Download Eminent EM4431 network switch

Transcript
3 | ENGLISH
2.0 Front and rear panel description
2.1 Front panel
Figure 1-1 shows the front panel of the switch.
Ports :
These ports are connection points for PCs and other network devices, such as
additional switches.
2.1.1 LED Indicator description
You can see the switch’s work status by LED indicators. The following table shows
these indicators function:
LED
PWR
Status
Description
ON
Power is supplied
OFF
No power
A valid link is established
ON
Link
Blinking
OFF
ON
Data packets received
No link is established
There is a PoE PD (Powered Device) connected to the
port, which supply power successfully.
PoE
OFF
MAX 1(1-4
Ports)
ON
OFF
MAX 2(5-8
Ports)
ON
OFF
No PD port connect to the port, or the power is not
enough to supply PoE device to work
When the power output to PDs has reached or
exceeded the maximum power. No additional PDs
connected will be powered.
When the system is using less than 55W or Higher than
70W
When the power output to PDs has reached or
exceeded the maximum power. No additional PDs
connected will be powered.
When the system is using less than 55W or Higher than
70W