Download Philips NTRX300

1
2
3
Place the supplied paper card on one
corner of the main unit; the side lines of
the paper card should align with the side of
the corner.
Stick the one rubber pad to the position of
the opening circle of the paper card.
Connect speakers
Note
•• For optimal sound, use the supplied speakers only.
•• Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specifications section of this manual.
Remove the paper card, and repeat the
steps to stick the other rubber pads.
Note
•• To avoid magnetic interference or unwanted noise,
never place this apparatus and speakers too close to
any radiation devices.
•• Place this unit on top of a table.
•• Never place this unit in an enclosed cabinet.
•• Install this unit near the AC outlet where the AC power
plug can be easily reached.
AUX IN1
1
Connect FM antenna
Connect the supplied FM antenna to the FM
jack on the back of the main unit.
1
2
3
8
EN
2
AUX IN2
3
Unscrew the socket flap.
Insert the stripped part of the wire
completely.
• Insert the right speaker wires to "R",
left speaker wires to "L".
• Insert the red wires to "+", black wires
to "-".
Screw the socket flap.