Download Gefen EXT-AVCONFS video conferencing system

RS-232 SERIAL COMMANDS
General Commands
Command
Description
IR
Sets the IR channel
OSDHPOS
Sets the horizontal position of the OSD
OSDVPOS
Sets the vertical position of the OSD
POWER
Turns the Scaler ON or OFF
IR Command
The IR command sets the IR Channel used by the Scaler. The IR channel can
be set to 1, 2, 3, or 4.
Syntax:
IR param1
Parameters:
param1
Level
[1...4]
Notes:
Set param1 to ALL to have the Scaler receive on any IR channel.
Use ? for param1 to retrieve the current value.
OSDHPOS Command
The OSDHPOS command sets the horizontal position of the OSD.
Syntax:
OSDHPOS param1
Parameters:
param1
HPos
[0...100]
Notes:
Use ? for param1 to retrieve the current value.
37