Download Areca ARC-1213-4I RAID controller

DRIVER INSTALLATION
4.2 Driver Installation for Windows
The 6Gb/s SAS RAID controller can be used with Microsoft Windows 7/2008/Vista/XP/2003. The 6Gb/s SAS RAID controllers
support SCSI Miniport and StorPort Drivers for Windows 7/2008/
Vista/2003.
4.2.1 New Storage Device Drivers in Windows
7/2008/Vista/2003
The Storport driver is new to Windows 7/2008/Vista/2003. Storport implements a new architecture designed for better performance with RAID systems and in Storage Area Network (SAN)
environments. Storport delivers higher I/O throughput, enhanced
manageability, and an improved miniport interface. Storport better utilizes faster controllers through the use of reduced Delay
Procedure Call (DPC) and improved queue management.
4.2.2 Install Windows 7/2008/Vista/XP/2003 on
a 6Gb/s SAS RAID Volume
The following instructions explain how to install the 6Gb/s SAS
RAID controller device driver. For completed details on installing
Windows, see the Windows User’s Manual.
4.2.2.1 Installation Procedures
The following procedures detail installing the 6Gb/s SAS RAID
controller driver while installing Windows 7/2008/Vista/XP/2003.
Have your bootable Microsoft Windows CD and follow the required procedure below to install 6Gb/s SAS RAID controller:
1. Make sure you follow the instructions in Chapter 2 “Hardware
Installation” to install the controller and connect the disk drives
or enclosure.
2. Start the system and then press Tab+F6 to access the McBIOS RAID manager. Use the McBIOS RAID manager to create
the RAID set and volume set to which you will install Windows.
For details, see Chapter 3 “McBIOS RAID manager”. Once a
97