Download Edge-Core ES4524M-PoE EU

Configuring the Switch
Table 3-1 Supported Notification Messages (Continued)
Object Label
Object ID
Description
linkDown*
1.3.6.1.6.3.1.1.5.3
A linkDown trap signifies that the SNMP entity,
acting in an agent role, has detected that the
ifOperStatus object for one of its
communication links is about to enter the
down state from some other state (but not
from the notPresent state). This other state is
indicated by the included value of
ifOperStatus.
linkUp*
1.3.6.1.6.3.1.1.5.4
A linkUp trap signifies that the SNMP entity,
acting in an agent role, has detected that the
ifOperStatus object for one of its
communication links left the down state and
transitioned into some other state (but not into
the notPresent state). This other state is
indicated by the included value of
ifOperStatus.
authenticationFailure*
1.3.6.1.6.3.1.1.5.5
An authenticationFailure trap signifies that the
SNMPv2 entity, acting in an agent role, has
received a protocol message that is not
properly authenticated. While all
implementations of the SNMPv2 must be
capable of generating this trap, the
snmpEnableAuthenTraps object indicates
whether this trap will be generated.
risingAlarm
1.3.6.1.2.1.16.0.1
The SNMP trap that is generated when an
alarm entry crosses its rising threshold and
generates an event that is configured for
sending SNMP traps.
fallingAlarm
1.3.6.1.2.1.16.0.2
The SNMP trap that is generated when an
alarm entry crosses its falling threshold and
generates an event that is configured for
sending SNMP traps.
swPowerStatus
ChangeTrap
1.3.6.1.4.1.259.8.1.7.1.0.1
This trap is sent when the power state
changes.
swIpFilterRejectTrap
1.3.6.1.4.1.259.8.1.7.1.0.40
This trap is sent when an incorrect IP address
is rejected by the IP Filter.
RMON Events (V2)
Private Traps
*
These are legacy notifications and therefore must be enabled in conjunction with the corresponding traps on the
SNMP Configuration menu (page 3-42).
3-50