Download Zebra MK3000
Transcript
Application Deployment 5 - 13 4. Select (hex image) COMPRESSION to reduce the size and speed up the download. 5. Click OK and follow the on-screen instructions. If one of the partitions is the ESSID, a prompt appears requesting the ESSID value. Deselect the HR (High Rate) check box when building ESSID images for a device with an FH radio. Figure 5-10 Build ESSID Partition Window If one of the partitions is the Splash Screen, a prompt appears requesting both the source Bitmap file and the destination HEX file. 6. TCM performs a check, and if there are no errors, creates the partition hex files. If the build fails, TCM does not create the hex files and displays an error message. Two common reasons for a build failure are: • TCM could not find the files defined in the script. This error can occur when the files referenced by the script are no longer stored on the development computer or the folders where they are stored were renamed. • The total amount of flash memory space that the script requires exceeds the image size. To correct this, reduce the number of files in the partition or increase the size of the partition. See Defining Script Properties on page 5-10 for more information about setting the image size appropriately.