Transcript
ILT BU -I USER’S GUIDE 4 in 1 Cooling Stand COOLI FAN NG N PACKAGE CONTENTS: • 4 in 1 Cooling Stand • AC Adapter • User’s Guide/Warranty Card • Registration Card COOLING STAND FEATURES: • Holds Nintendo Wii console • Holds (1) Nintendo Wii Remote • Holds (1) Nintendo Wii Nunchuck • Holds up to (5) Nintendo Wii games cases • Recharges up to (2) rechargeable “AA” batteries SET-UP: The 4 in 1 Cooling Stand features a built-in USB cable. There are two ways to power the 4 in 1 Cooling Stand using this cable: 1. With the Wii console placed on the Cooling Stand, plug the USB cable into one of the Wii USB ports located on the back of the console. Press the power button on the front of the Cooling Stand to turn the unit on. This will power on the 4 in 1 Cooling Stand and the fan will start automatically. 2. With the Wii console placed on the Cooling Stand, plug the USB cable into the included AC Adapter. Plug the AC Adapter into a wall outlet. Press the power button on the front of the Cooling Stand to turn the unit on. This will power on the 4 in 1 Cooling Stand and the fan will start automatically. CHARGING YOUR RECHARGEABLE BATTERIES: 1. Place up to (2) rechargeable “AA” batteries in the battery compartment. 2. With the 4 in 1 Cooling Stand either plugged into the Wii console through the USB cable or plugged into a wall outlet using the AC Adapter, press the power button on the front of the Cooling Stand to turn the unit on. The rechargeable batteries will be charged while the unit is powered “ON”. The LED will illuminate RED when the batteries are charging and BLUE when the batteries are fully charged. NOTE: DO NOT put alkaline batteries into the battery compartment. NOTE: Rechargeable battery charging times will vary.