Download SNAP Connect E10 User Guide - Synapse Support Forums

Recovery Steps
Send the remaining files
Chapter 7: Recovery Procedure
Step 12: Send the remaining files.
The remaining three files are transferred in a different way so you will not be using the
Scripts pull-down menu for this step.
In the Download/Upload File section of the GUI there is a Send File button with a
choose file icon (i.e., a folder icon) to its left. Click this icon (pointed out in Figure 7-9) to
open a dialog box which allows you to browse to the u-boot-20000.bin file.
You then have to fill in the Address: field with a value of 0x20000 (notice that there are
four zeros). Click the Send File button. The file is transferred to your E10.
Click this top folder icon to
choose the file you need
to transfer.
Figure 7-9: Sending Other Files
600034-01A
SNAP Connect E10 User Guide
Page 49