Download Operating Instructions

If your TV has a Scart (EURO-AV) connector
AERIAL IN
Getting Started
i LINE-1
(TV)
Mains lead
AERIAL OUT
AERIAL IN
to mains
Aerial cable (supplied)
Scart
(EURO-AV)
Scart cable (not supplied)
: Signal flow
1
Disconnect the aerial cable from your
TV and connect it to AERIAL IN on
the rear panel of the VCR.
IN
NTR
ARIAL
ANTNN
2
3
Connect AERIAL OUT of the VCR
and the aerial input of your TV using
the supplied aerial cable.
OUT
SORTI
IN
NTR
ARIAL
ANTNN
OUT
SORTI
Connect LINE-1 (TV) on the VCR
and the Scart (EURO-AV) connector
on the TV with the optional Scart
cable.
This connection improves picture and
sound quality. Whenever you want to
watch the VCR picture, press t TV/
VIDEO to display the VIDEO
indicator in the display window.
4
Connect the mains lead to the mains.
Note
• If the TV is connected to the LINE-1 (TV) connector, setting the RF channel to OFF is
recommended. In the OFF position, only the signal from the aerial is output through the
AERIAL OUT connector (see page 13).
continued
Connecting the VCR
9