Download IP Link Power Control Interface

Viewing the system status
The System Status Web page on the Status tab provides information on the
current settings. Changes must be made via the Configuration Web pages or SIS
programming commands (see chapter 5, SIS Programming and Control). Personnel
who have user access can view this page but cannot access the Configuration or
File Management tab pages to make changes.
PRELIMINARY
The following figure shows an IPL T PCS4 System Status web page.
System Status Web page
The System Status page displays information in the following categories:
•
System Description: Includes product model, a brief description, part number,
and firmware version, plus the current date and time.
•
IP Settings: Displays the unit’s name, IP address, MAC address, and all other
current IP settings.
•
AC Receptacles: For each receptacle, shows whether the receptacle is turned
on or off; the current power level threshold setting (Full, Standby, Not Set, or
None); whether the receptacle is part of a group; and the alarm state.
•
Current Schedule: Shows the day of the week and the time that any receptacle
has been scheduled to power on and off.
IPL T PCS4 • Web Page-Based Setup and Control
4-9