Download Cajun P330 Manager User Guide

Device Manager
Selected ports and LAGs can be configured using the Get/Set Toolbar. To
change the configuration of a port or LAG, click the button which
represents the value of the parameter you want to apply to the port or
LAG. Click apply to update the device with the changes. Click cancel to
discard the changes. Options not applicable to the selected port or LAG
are dimmed.
To configure the ports of a LAG, select the LAG icon in the Tree View or
the Chassis View. Ports belonging to a LAG may not be configured by
selecting the port.
Multiple ports and LAGs can be simultaneously configured using the
Get/Set Toolbar. When multiple ports or LAGs with nonidentical
configurations are selected, only the parameters whose settings are
identical on the selected ports or LAGs are reflected in the Get/Set
Toolbar. For example, if a port operating at full duplex and a port
operating at half duplex are selected, neither of the duplex mode buttons
on the Get/Set Toolbar are depressed.
The table below displays the buttons on the Get/Set Toolbar and explains
their functions and settings.
Table 2-2. Get/Set Toolbar
Button
Description
Get and set the port/LAG’s speed: 10 Mbps, 100 Mbps, 1000
Mbps.
Get and set the port/LAG’s status: Enabled, Disabled.
Get and set the port/LAG’s mode: Half duplex, Full duplex.
Get and set the port/LAG’s auto-negotiation status:
Auto-negotiation Enabled, Auto-negotiation Disabled.
Get and set the port/LAG’s priority: Regular priority, High
priority.
Apply or cancel the configuration changes made with the
Get/Set Toolbar.
Cajun P330 Manager User Guide
12