Download Partner Feature Code List For ACS

1. Press feature +(00)+(left intercom)+(left intercom)+#103 at extension 10 or 11.
2. Enter a new time in 24-hour notation. For example, to set the time to 2:15 p.m.,
press 1415.
A display similar to the following appears:
System Time
Data 1415
This time appears on system display phones as 2:15 p.
or 11.
2. Enter today’s date in the form “mmddyy” (month, day, and year),
including leading zeros for single-digit months or days. For example, to enter
April 26, 2008, press 042608. A display similar to the following appears:
System Date
Data 042601
3. Select another procedure, or exit programming mode.
3. Select another procedure, or exit programming mode.

Assigning Lines- Number of Lines (#104) determines the number of outside lines assigned to all system extensions
Use the feature Number of Lines (#104) to determine in Key mode the number of outside lines that are automatically assigned to all system extensions, or to
determine in Hybrid mode the number of lines assigned to the main pool. After you use the Number of Lines feature, you can use other features to refine the
assignment of lines.
Line assignment is also based upon whether an extension is a Key or Pooled extension. Refine the line assignment accordingly after you use the Number of Lines
feature.
Use this feature to determine in Key mode the number of outside lines that are automatically assigned to all system extensions. In Hybrid mode, use this feature to
determine the number of lines assigned to the main pool. (This number does not have to match the actual number of lines connected at the control unit.) This feature
should be used only for initial system setup.
CAUTION:
Do not use Number of Lines (#104) after initial setup.

You can use this feature to tell the system how many lines are actually connected at thecontrol unit. If you do not use this feature, the line numbers associated

You can use this procedure to limit the number of lines that are automatically assigned to all extensions. For example, if there are ten lines connected to the
with empty jacks are assigned to telephones as though there were actually lines connected.
control unit, you can use this procedure to set the number of lines to eight, so that only the first eight lines are assigned to all system extensions. You can then
use Line Assignment (#301) to assign lines 9 and 10 to specific extensions.

To change pool assignments without affecting other settings, use Pool Line Assignment (#207) and Pool Extension Assignment (#314).

In Hybrid mode, do not use this feature to add lines to the system after initial setup, because it changes the following features for existing pools back to factory
settings:
— Pool Line Assignment
— Pool Extension Assignment
— Pool Access Restriction
— Automatic Line Selection
— Line Ringing