Download Vixel 7100 Ethernet Switch

Transcript
7100 & 7200.book Page 4 Thursday, July 11, 2002 10:32 AM
CHAPTER 1 Introduction
Vixel 7100/7200 Installation & Configuration Guide
Segmenting Private Loops
Stealth-3 Loop Switching Mode allows you to segment a private loop of devices that
do not yet support public loops into interconnected multiple loops—each with its
own 200 MBytes (full duplex) bandwidth. As shown in Figure 1-2, these multipleloop topologies allow you to isolate one or more devices on a switch port.
JBOD
JBOD
Vixel 2100
managed hub w/zoning
HOST
HOST
HOST
Single Loop
Topology
RAID
HOST
RAID
HOST
HOST
Vixel
fibre channel switch
Multiple Loop
Topology
Vixel
fibre channel switch
Vixel
fibre channel switch
HOST
JBOD
HOST
JBOD
Figure 1-2. With the Vixel 7100/7200 Series Switch, devices can migrate from a
single loop topology to a multiple loop topology
Switches running in Stealth-3 Mode also support cascaded switches (in a star
configuration) and “switch-attached” (N_Port) single-AL_PA devices (such as
RAIDs) that perform fabric login. For more information, see CHAPTER 5 on page
25 or APPENDIX C on page 56.
4