Download Vixel 7100 Ethernet Switch
Transcript
7100 & 7200.book Page 4 Thursday, July 11, 2002 10:32 AM CHAPTER 1 Introduction Vixel 7100/7200 Installation & Configuration Guide Segmenting Private Loops Stealth-3 Loop Switching Mode allows you to segment a private loop of devices that do not yet support public loops into interconnected multiple loops—each with its own 200 MBytes (full duplex) bandwidth. As shown in Figure 1-2, these multipleloop topologies allow you to isolate one or more devices on a switch port. JBOD JBOD Vixel 2100 managed hub w/zoning HOST HOST HOST Single Loop Topology RAID HOST RAID HOST HOST Vixel fibre channel switch Multiple Loop Topology Vixel fibre channel switch Vixel fibre channel switch HOST JBOD HOST JBOD Figure 1-2. With the Vixel 7100/7200 Series Switch, devices can migrate from a single loop topology to a multiple loop topology Switches running in Stealth-3 Mode also support cascaded switches (in a star configuration) and “switch-attached” (N_Port) single-AL_PA devices (such as RAIDs) that perform fabric login. For more information, see CHAPTER 5 on page 25 or APPENDIX C on page 56. 4