Download Intel SRCMR Ultra160 SCSI (srcmru) SCSI Controller

Storage Console
Table 10-11. Controller Settings
Parameter
Alternatives
Description
On
IIR cache (write and read cache) On
Off
IIR cache (write and read cache) Off
On
Write cache On
Off
Write cache Off
Enabled
BIOS enabled
Disabled
BIOS disabled, but <Ctrl>+<G> allowed
Removed
BIOS and <Ctrl>+<G> disabled
BIOS Warning
Level
All Messages
All IIR BIOS warnings and errors are displayed
Fatal Errors
Only fatal messages are displayed
SETUP from
Flash-RAM
Disabled
<Ctrl>+<G> not possible
Cache
Delayed Write
BIOS
Display
Supported
BIOS Drives
CD-ROM Boot
Enabled
<Ctrl>+<G> allowed
Off
<Ctrl>+<G> not displayed at system boot level
On
<Ctrl>+<G> displayed at system boot level
2
The IIR BIOS supports 2 drives
7
The IIR BIOS supports 7 drives
Disabled
Boot from CD-ROM disabled
Enabled
Boot from CD-ROM enabled
No test
No test at all
Standard
Standard test
Double scan
Double scan test
Intensive
Intensive test (takes longer)
Halt on
Firmware
messages
Off
Don’t stop display of firmware messages during
system boot
On
Stop display of firmware messages during system
boot when any error occurs
Immediate
Hard Disk start
Off
Initiate hard disks one at a time
On
Initiate all hard disks at the same time
Chn. SCSI-A
Termination
Auto
SCSI termination according to occupied connectors
Chn. SCSI-A
SCSI ID
0,1,2,3,4,5,6,7
Possible SCSI IDs for the channel
Chn. SCSI-B
Termination
Auto
SCSI termination according to occupied connectors
Chn. SCSI-B
SCSI ID
0,1,2,3,4,5,6,7
Possible SCSI IDs for the channel
Memory Test
All information concerning physical, logical, array and host drives are stored twice
(primary and secondary configuration data) on each hard disk. For example, the IIR
controller itself carries no configuration data of a specific disk array. For this reason the
Software Installation and User’s Guide
119