Download Philips TS3259C TV
Transcript
QUICK USE AND INSTALLATION GUIDE TABLE OF CONTENTS 11 12 Warning/Precautions ..................................1 Hooking Up Your TV ................................1 Basic TV and Remote Control Operation .................2 How to Use the “INSTALL” Controls ..................3-4 Using the Language Control......................................3 Setting the TV to Auto Program Channels ................3 Setting the TV for a Cable or Antenna Signal...........3 Using the Channel Edit Control ................................4 Setting the Channel Name Control............................4 How to use the Smart Clock control .........................4 3 7 Color Television and Remote Control For details on product registration, warranty, and service refer to the other literature included with your TV information packet. 2 4 8 ANTENNA • Getting Started 1 10 9 6 5 Please retain all these materials and keep them handy for future reference. WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR EXCESSIVE MOISTURE. NOTE: This Quick Use Guide may be used with other models. Some of the features listed may or maynot apply to your TV. BEGIN OUTDOOR/INDOOR combination (outdoor or indoor) antenna receives normal broadcast channels 2-13 (VHF) and 14-69 (UHF). Your connection to such an antenna is easy since there is only one antenna plug (75Ωohm) on the back of your TV - and that’s where the antenna goes. A Note: For homes with separate UHF and VHF antennas you will need an optional combiner to connect to the TV. U/V Combiner Push the round end of the adapter (or antenna) onto the ANTENNA (ANT “A”) plug on the rear of the TV. If the round end of the antenna wire is threaded, screw it down tight. If your antenna has a round cable connector (75 ohm) on the end, then you're ready to connect it to the TV. If your antenna has flat twinlead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300 to 75 ohm adapter. UH F 30 0Ω S-VIDEO VIDEO VHFVH L AUDIO ANT "A" 75 R/MONO F IN-2 IN-1 OUT Back of TV OR R TE AP 00 Ω AD Remember, be sure to set the TV for the type signal you've connected (see "TUNER" on page 3 of this Guide.) -3 75 To order any optional accessory contact your dealer or call the toll-free accessory ordering number: 1-800-851-8885 75-300 Ohm Adapter Combination VHF/UHF Antenna (Outdoor or Indoor) SMART HELP 300 to 75Ω Adapter (483521827003) 1 2 Twin Lead Wire ANT "A" 75 S-VIDEO VIDEO L ANT "A" 75 AUDIO R/MONO IN-2 OR IN-1 OUT Back of TV Round Cable 75Ω Ohm CABLE TV CABLE INPUT/CONVERTER Y our Cable TV input into your home may be a single (75 ohm) cable, or a Converter Box installation. In either case the connection to the TV is very easy. Just put the threaded end of the cable signal to the TV's antenna plug and screw it down hand tight. SMART HELP BEGIN If your Cable TV signal is a single round cable (75 ohm) then you're ready to connect to the TV. If you have a Cable TV Converter Box: Connect the Cable TV signal to the Cable Signal IN(put) plug on the Converter. Connect the Cable TV cable to the ANTENNA (ANT “A”) plug on the TV. If you have a Cable TV Converter Box: Connect the OUT(put) plug from the Converter to the ANTENNA (ANT “A”) plug on the TV (connecting cable supplied with the Converter.) 2 ANT "A" 75 Cable TV Signal Cable TV Company Remember, set the TV for the type signal you've just connected (see “TUNER” page 3 of this Set-Up Guide.) S-VIDEO VIDEO L ANT "A" 75 BASIC CONNECTION T he basic Antenna, or Cable TV, to VCR to TV connection is shown to the right. For more information on other hookups (possible when Cable Converter/Descrambler boxes are included) refer to your accessory VCR and Cable Converter Owner's Manual for details. IN-1 OUT Back of TV OUT Round Cable 75Ω Ohm Cable TV Converter Box Connection VCR TO TV AUDIO R/MONO IN-2 OR IN Your TV can set itself to select only the channel numbers on your Cable system (see “AUTO PROGRAM" page 3). If you use a Cable Converter box, set the TV to the same channel as the converter's CH 3/4 switch (on the rear of the converter.) 1 BEGIN Connect the OUT TO TV plug on the VCR to the ANTENNA (ANT “A”) plug on the TV (connecting cable supplied with the VCR.) Connect your Antenna or Cable TV signal to the IN FROM ANT(enna) plug on the VCR. Refer to the Owner's Manual included with your VCR for other possible connections and TV/VCR operating details. 300 to 75Ω Ohm Adapter Outdoor VHF/UHF Antenna OR IN FROM ANT. OUT TO TV Round Cable 75Ω Supplied with VCR ANT "A" 75 S-VIDEO VIDEO L ANT "A" 75 AUDIO R/MONO IN-2 IN-1 OUT Cable TV signal Back of TV VCR 1 3135 015 12981 TV AND REMOTE CONTROL OPERATION TELEVISION BEGIN Press the POWER button to turn the TV ON. 12:00 PM STEREO 6 Press the VOLUME + © button to increase the sound level or the VOLUME – § button to lower the sound level. Note: Always press two number buttons on the remote when selecting channels under 100. Press three number buttons for any channels 100 or above. For example: press "0" then "6" for channel 6 or, press “1” then “2” then “5” for channel 125. Pressing both buttons at the same time will display the onscreen menu. Once in the menu, use these button to make adjustments or selections. – VOLUME + © § POWER REMOTE BATTERY INSTALLATION T o load the supplied batteries into the remote: Slide the TV/VCR/ACC mode switch on the remote control to the TV position and point the remote at the front of the TV when sending commands. Press the CHANNEL UP ▲ or DOWN ▼ button to select TV channels. CHANNEL MENU BEGIN Point the remote control toward the remote sensor window on the TV when operating the TV with the remote. ER POW 1. Remove the battery compartment lid on the back of the remote. ZE N FREE ITIO POS EP SLE FF ON/O E URC AV TV PIP UP CH DN VCR ACC ART SM E 2. Place the batteries (2AA) in the remote. Be sure the (+) and (-) ends of the batteries line up correctly (inside of case is marked.) TUR PIC ART ND SOU ENU M CH VOL With the switch in the "TV" position: the Menu, CURSOR ©, ©©, §§ and ■ buttons are used to select and adjust on-screen TV features. With the switch in the "ACC" position: the Power, Channel Number, and Channel Up (+) /Down (–) buttons on the remote work with Cable TV Converters. With the switch in the "VCR" position: the Menu, CURSOR ©, ©©, §§ and ■ buttons on the remote work Stop, Play, Pause, and other VCR features. Note: For more details on how the TV remote works with VCRs and Cable Converters, see the other owner's manual supplied with your TV. TUS STA CC K LOC C CR TV/V LTI MU EXIT IA MED VCR LE EDIB R INC ORD REC REO STE 4 CC Button Sleep Button For example: H A/C TE MU Press to set the TV to automatically turn itself OFF. Also can be used as an Enter button when sending channel commands to remote controlled cable converters or VCRs. The remote's TV/VCR/ACC Switch controls how buttons on the remote are used. F SUR SM 3. Reattach the battery lid. TV/VCR/ACC MODE SWITCH 3 SO AP SW POWER SLEEP Press to select Closed Caption options within the menu. (Refer to the Owner’s Manual for details.) Power Button Press to turn the TV (or select VCR/ Cable Converter) ON and OFF. Status/Exit Button Press to see the current channel number on the TV screen. Also press to clear the TV screen after control adjustments. TV AV STATUS/EXIT CC TV/VCR-CLOCK Clock-TV/VCR Button VCR VCR INCREDIBLE MULTI RECORD STEREO MEDIA A/CH TV/VCR/ACC Mode Switch Slide to position of TV to control TV functions, VCR to control VCR functions and ACC for Cable Converter, DSS, DVD, etc. functions. ACC AV Button When in TV mode, press for direct entry of the TIMER feature were you can set the TV’s clock. When in the VCR mode, this button can be used to quickly toggle between the VCR A/V connection and the last viewed TV channel. Light Button Press to toggle between the external Audio/Video input jacks. This button will tune to the AV 1, AV 2 or current tuner channel. Press to back light the Menu, Surf, Cursor, Volume, and Channel buttons. VCR-Record Button SMART When in the VCR mode, press to start the recording of a video tape. SOUND PICTURE MENU SURF Incredible Stereo Button Press to toggle between the Mono and Spatial sound controls. (Expands the stereo sound for a fuller, more dynamic listening experience.) SMART A/CH Button Press to toggle between the currently viewed channel and the previously viewed channel. Multi Media Button Press to toggle between the external input jacks. This button will tune to the MM 1, MM 2 channels along with setting the picture controls to the Smart Picture setting for Multi Media viewing. Smart Sound Button Press to control TV sound levels during program changes or commercial breaks. Number Buttons Menu Button VOL Press for the on-screen menu to appear. Pressing the menu button after menu selections are made will eliminate the menu from the display. CH MUTE Press the number buttons to select TV channels. Press two number buttons to select single digit channels. For example: press "0" then "6" for channel 6. Smart Picture Button Press to select from a list of Smart Picture controls. (Factory preset picture control levels set for different types of viewing sources and programs.) Cursor Buttons Use these button to move through the onscreen menu; make selections within the menu; make adjustments to the menu. Also used with a VCR for PLAY, FAST FORWARD, REWIND, and STOP. Surf Button Press to select previously viewed channels. You can place up to 10 channels in memory. Then by pressing the SURF button you can quickly view the select channels. See the “Surf" section (in your other owner's manual) to see how to select a series of channels using the Surf button. Volume (+), (–) Buttons Press to adjust the TV sound level. Mute Button Press to turn the sound OFF on the TV. Press again to return the sound to its previous level. Channel (+), (–) Buttons Press to change the tuned channel. SMART HELP Remember, You can press any button on the front of the TV to turn the TV ON. The tuned channel number will always briefly appear when the TV is first turned ON (and with channel changes.) You can also press the STATUS button (on the remote) to see what channel the TV is ON. 2 HOW TO USE THE INSTALLATION FEATURES LANGUAGE BEGIN Press the MENU button on the remote to show the on-screen menu. F or our Spanish and French speaking TV owners an on-screen LANGUAGE option is present. With the LANGUAGE control you can set the TV’s on-screen menu to be shown in either English, Spanish, or French. Press the CURSOR RIGHT ©© button and the menu will shift highlighting the LANGUAGE feature. Press the CURSOR DOWN ■ button four times to select the INSTALL menu. Press the CURSOR UP .. .. . PICTURE LANGUAGE SOUND TUNER FEATURES AUTO PROGRAM INSTALL CHANNEL EDIT ... . INSTALL .. .. . SLEEP TV VCR A/V STATUS VCR INCR ACC RECORD STER 1 EDIB EO POWER /EXIT LE CC MUL TI MED TV/VC R-CLOC ... . ENGLISH LANGUAGE ESPANOL .. .. . AUTO PROGRAM CHANNEL EDIT NAME SMART CLOCK K SMAR T D . INSTALAR TUNER A/CH IA select ENGLISH, ESPANOL (Spanish), or FRANCAIS (French). REVIEW SMART CLOCK MENU IDIOMA ESPANOL FRANCAIS SINTONIA AUTO PROGRAM ... . NOMBRE SMART CLOCK PICT URE VOL FRANCAIS LANGUE SYNTON AUTO PROGRAM CHANNEL EDIT NOM DU CANAL SMART CLOCK SMART HELP E CH 4 . INSTALL .. .. . ED. DE CANAL SMAR T SURF MUT Language control options. © or DOWN ■ buttons to NAME SOUN Press CURSOR RIGHT ©© button to highlight the 3 2 AUTO PROGRAM 5 Remember, the Language control only makes the TV’s on-screen MENU items appear in English, Spanish, or French text. It does not change the other on-screen text features such as Closed Caption (CC) TV shows. Pressing the STATUS/EXIT button after making adjustments to the TV will remove the menu from the screen. BEGIN Press the MENU button on the remote to show the on-screen menu. Y our TV can automatically set itself for local area (or Cable TV) channels. This makes it easy for you to select only the TV stations in your area when the CHANNEL (+), (–) buttons are pressed. .. .. . PICTURE LANGUAGE SOUND TUNER FEATURES AUTO PROGRAM INSTALL CHANNEL EDIT ... . INSTALL .. ... SMART CLOCK SLEEP TV VCR A/V STATUS VCR INCR STER 1 EO EDIB LE /EXIT MUL TI MED IA POWER CC TV/VC R-CLOC Press the CURSOR RIGHT ©© button to start the Auto Program scanning of channels REVIEW NAME ACC RECORD LANGUAGE TUNER AUTO PROGRAM ... . INSTALL AUTO PROGRAM .. . . CHANNEL EDIT NAME ... . INSTALL TUNER CABLE CHANNEL 12 .. ... PLEASE WAIT SMART CLOCK K A/CH SMAR T SO MENU UND SMAR T PICT SURF Press CURSOR DOWN ■ button to highlight the AUTO PROGRAM control. Press the CURSOR RIGHT ©© button and the menu will shift highlighting the LANGUAGE feature. Press the CURSOR DOWN ■ button four times to select the INSTALL menu. URE LANGUAGE TUNER AUTO PROGRAM CHANNEL EDIT NAME SMART CLOCK VOL MUT E CH 3 2 SMART HELP Try it out. Press the CHANNEL (+), (–) buttons and see which channels you can select. TUNER Remember, an antenna or cable TV signal must be first connected to your TV. BEGIN Y Press the CURSOR RIGHT ©© button and the menu will shift highlighting the LANGUAGE feature. Press the CURSOR RIGHT ©© button to highlight the TUNER options Press the CURSOR DOWN ■ button to highlight the TUNER control. © or the CURSOR DOWN Press the CURSOR UP .. .. . REVIEW PICTURE LANGUAGE SOUND TUNER FEATURES AUTO PROGRAM INSTALL CHANNEL EDIT NAME SMART CLOCK SLEEP TV VCR A/V STATUS VCR INCR ACC RECORD STER 1 Press the CURSOR DOWN ■ button four times to select the INSTALL menu. Press the MENU button on the remote to show the on-screen menu. ou need to make sure the TV is set to pick up either Cable TV or ANtenna signals. In other words, the TV needs to know if you want to receive channels coming from a Cable TV signal or a normal Antenna signal connected to the TV’s ANT Input. EO EDIB 6 SMAR T LE MED /EXIT MUL TI IA POWER CC TV/VC R-CLOC ... . INSTALL .. ... ENGLISH LANGUAGE ESPANOL TUNER AUTO PROGRAM CHANNEL EDIT NAME SMART CLOCK K A/CH SO MENU UND SMAR T PICT SURF URE ... . INSTALL .. .. . TUNER AUTO PROGRAM CHANNEL EDIT NAME SMART CLOCK ... . INSTALL LANGUAGE CABLE .. .. . LANGUAGE TUNER CHANNEL EDIT NAME SMART CLOCK 4 CABLE ■ button to select either CABLE, AUTO or ANTENNA ... . INSTALL .. .. ... .. .. .. LANGUAGE TUNER . AUTO AUTO PROGRAM CHANNEL EDIT INSTALL NAME SMART CLOCK LANGUAGE E CH 2 . AUTO PROGRAM VOL MUT If you want to delete any unwanted channels from the TV’s memory, see the CHANNEL EDIT section on the next page. 3 5 SMART HELP When CABLE is selected, channels 1-125 are available. 3 When ANTENNA is selected, channels 2-69 are available. TUNER . AUTO PROGRAM CHANNEL EDIT NAME SMART CLOCK ANTENNA HOW TO USE THE INSTALLATION FEATURES CHANNEL EDIT BEGIN Press the CURSOR RIGHT ©© button and the menu will shift highlighting the LANGUAGE feature. Press the MENU button on the remote to show the on-screen menu. C hannel Edit makes it easy for you to ADD or DELETE channels from the list of channels stored in the TV’s memory. Press the CURSOR DOWN ■ button four times to select the INSTALL menu. .. .. . A/V INCR ACC RECORD STER 1 STATUS PICTURE LANGUAGE SOUND TUNER FEATURES AUTO PROGRAM INSTALL CHANNEL EDIT ... . EO EDIB LE CC MUL TI MED IA TV/VC R-CLOC ... .. INSTALL .. .. . POWER /EXIT ADD or DELETE the channel from memory. REVIEW SLEEP TV VCR © or DOWN ■ button to To clear the screen, press the STATUS/EXIT button. SMART CLOCK VCR ... .. INSTALL CHANNEL EDIT LANGUAGE TUNER .. .. AUTO PROGRAM CHANNEL EDIT CHANNEL NAME ADD SMART CLOCK CHANNEL ... .. INSTALL CHANNEL EDIT .. .. 12 ADD K A/CH CHANNEL INSTALL CHANNEL EDIT 12 ADD SMAR T SOUN MENU D SMAR T PICT SURF Press the the CURSOR DOWN ■ button to highlight the ADD/DELETE option. Press the CURSOR UP Select the channel you want to ADD or DELETE with the CH (+) or (–) buttons. (OR, use the Number buttons.) Press the CURSOR DOWN ■ button to highlight the CHANNEL EDIT control. NAME 8 Press the CURSOR RIGHT ©© button to highlight the CHANNEL EDIT options. .. .. CHANNEL 12 DELETE URE 6 VOL MUT E CH 3 2 7 8 6 NAME 5 BEGIN T he channel NAME feature allows you to list the “call” letters of your favorite stations to their channel numbers when they appear on the screen. The TV has in it’s memory a list of the 50 most popular channel names (Example: ABC, NBC, FOX, etc.) You can also center a custom name (up to four digits). Press the MENU button on the remote to show the on-screen menu. Press the CURSOR DOWN ■ button to highlight the NAME control. Press the CURSOR DOWN ■ button four times to select the INSTALL menu. Press the CURSOR RIGHT©© button to highlight the NAME options area. PICTURE LANGUAGE SOUND TUNER FEATURES AUTO PROGRAM INSTALL CHANNEL EDIT ... . .. .. . SMART CLOCK VCR A/V INCR STER EO EDIB LE MED /EXIT MUL TI IA POWER CC TV/VC R-CLOC K A/CH SMAR T TUNER AUTO PROGRAM CHANNEL EDIT 12 NAME SMART CLOCK .. .. . TUNER AUTO PROGRAM CHANNEL EDIT PICT SURF SMART CLCOK 6 . PERSONAL E 5 SMART CLOCK S mart Clock can automatically set the TV’s onscreen clock. Since the time is received from a broadcast signal, be sure that a Cable TV or Antenna signal is present before attempting to use the Smart Clock feature. 6 SET TIME Press the MENU button on the remote to show the on-screen menu. .. .. . PICTURE LANGUAGE SOUND TUNER FEATURES AUTO PROGRAM INSTALL SMART CLCOK CHANNEL EDIT > .. .. . Press ">" to Continue AUTO MANUAL > " to set AM/PM Press the CURSOR DOWN ■ button to highlight the SMART CLOCK control. Press the CURSOR RIGHT ©© button to start the SMART CLOCK feature. Just follow the on-screen instructions to set the clock. LANGUAGE TUNER CHANNEL EDIT NAME SMART CLOCK Press ">" to Continue Time was not found on channel The time is broadcast by certain TV stations. We suggest trying PBS first Daylight Savings Time YES NO Enter another channel Set time Manually Enter the PBS channel 10 Please wait " to select Press ">" to Continue Press ">" to Continue Note: When setting the clock manually, use the number buttons on the remote to enter the time. Don’t forget to set AM or PM with the Cursor UP or DOWN button. 4 The time is broadcast by certain TV stations. We suggest trying PBS first. OR Press " " to select Press ">" to Continue Time was found 12:30 PM Enter the PBS channel 10 Press " Press ">" to Continue Press ">" to Continue " to set AM/PM > > > Press " Press ">" to Continue Press the CURSOR RIGHT ©© button and the menu will shift highlighting the LANGUAGE feature. AUTO PROGRAM Press " 12:30 PM " to set AM/PM CBS This TV contains a clock which can automatically be set through the SMART CLOCK Feature SET TIME Press ">" to Continue . > > ... . > > Press " " to select Press ">" to Continue Press the CURSOR DOWN ■ button four times to select the INSTALL menu. INSTALL REVIEW ATLANTIC EASTERN CENTRAL MOUNTAIN > . C NAME BEGIN Press " " to select the time zone that you live in AUTO MANUAL Press " CHANNEL EDIT 7 SMART CLOCK Follow these on-screen instructions to set the SmartClock Manually AUTO PROGRAM AMC NAME Follow these on-screen instructions to set the SmartClock Automatically TUNER ACTS > 4 ABC 3 2 LANGUAGE URE CH 6 . PERSONAL NAME .. .. . 12:00 PM STEREO 6 CBS INSTALL LANGUAGE SMAR T VOL MUT ... . INSTALL LANGUAGE SO MENU UND You can also enter a channel name manually. Press the CURSOR RIGHT ©© button again, then use the CURSOR UP © and DOWN ■ buttons to scroll through a list of options for the first digit. Press the CURSOR RIGHT ©© button and repeat for the second, third, and fourth digit. Press the STATUS/EXIT button to clear the menu from the screen > 1 STATUS VCR ... . INSTALL NAME ACC RECORD OR Once you have selected a name for the channel, press the MENU button to SAVE the name in the TV’s memory. REVIEW SLEEP 6 through a list of channel names provided in the TV’s memory. Press the CURSOR RIGHT ©© button and the menu will shift highlighting the LANGUAGE feature. .. ... TV Using the CURSOR UP © or DOWN ■ buttons, scroll > 4 Press ">" to Continue