Download Symantec Enterprise Firewall 7.0 for PC

Installing on Windows 2000 and Windows NT
Changing your network interface configuration or license
Changing your network interface configuration or
license
The Symantec Enterprise Firewall or VPN Configuration utility, which is
installed when you install SEF or SEVPN, can be used to:
•
Change the configuration of your network interfaces
•
Change your license (for example, if you want to upgrade from an evaluation
installation to a fully licensed installation)
Caution: Before you make a change to your SEF or SEVPN configuration, you
should notify your users. Changing the network interface configuration requires
a reboot of the firewall server. Changing your license information momentarily
stops the firewall service.
To change your network interface configuration
1
Double-click on the Configure VPN or Firewall Gateway icon on your
desktop.
or
Click Start > Programs > Symantec Enterprise Firewall or VPN > Configure
VPN or Firewall Gateway.
Figure 4-30
2
Symantec Enterprise Firewall or VPN Configuration
To specify a network interface as an inside interface, select it in the Outside
list, then click the Add >> button. It is moved to the Inside list.
65