Download PerkinElmer Perkin Elmer - lambda 20 - Perkin Elmer Uvvis-spectrophotometer Lam

Using Methods
3. Insert the references in sequence when asked.
When they have all been measured, the instrument prints out the calibration
curve and the results.
You can now amend the calibration curve (see Processing the Calibration
Curve (CONCENTRATION Methods) on page 103) if required.
You can use previously established calibration curves, or reference values (see
REFS in Parameter Numbers and Descriptions, page 169).
Measuring the Sample
1. Press [START] to start the measurement.
2. Check the display.
If the display is:
AUTOZERO
START,STOP
Insert cell(s) containing a blank solution and press [START]
OR
If the display is:
CONC 1
SMPL 1
START,STOP,AUTOZERO
Insert a cell containing the sample solution and press [START].
3. Continue to insert samples when asked until they have all been measured.
95