Download Lexmark 320 Printer User Manual

Setting up the network printer
2
Printing
Print a network setup page
Paper handling
Push the operator panel button with a brief button press to print a network setup page
showing the physical address of the network printer. A printer settings page prints first and
after a few moments a network setup page prints. Save the network setup page because you
will use it later.
Maintenance
Configure and print
Troubleshooting
TCP/IP
Step 1: Set the IP address, netmask and gateway
Administration
You must assign an IP address, netmask and gateway to the print server in order for other
network devices to find it on the network.
• If you have DHCP, the proper addresses are automatically assigned. To verify the
Index
assignment has happened, print a network setup page and make sure the IP address,
netmask and gateway appear as non-zero.
• If you don’t have DHCP, there are other methods you can use to manually assign the
address, such as static ARP and telnet, or a setup utility.
www.lexmark.com
Lexmark E320/E322 Printer