Download Lexmark 320 Printer User Manual

Setting up the network printer
5
Printing
1 Determine the hardware address of the print server. See the item labeled UAA on the
Paper handling
network setup page. For Ethernet networks, use the number in the right column
(canonical).
2 Add a static ARP entry for the IP address. Use the hardware address from step 1. Use
Maintenance
the dotted decimal form of the IP address, such as 157.184.8.231. Use the
commands appropriate to the host operating system. For example, on many UNIX
computers you would type something similar to the following example:
arp -s ether 157.184.8.231 00:04:00:30:00:44
Troubleshooting
If you need help and are using a UNIX system, try the man page for ARP.
3 Use telnet to access the print server. For UNIX systems, use the following command:
telnet 157.184.8.231 9000
Administration
Index
where address is the print server host name (or print server IP address in dotted
decimal format, such as 157.184.8.231). The print server port is 9000.
4 Follow the instructions on the screen to set the print server IP address, netmask and
gateway.
Troubleshooting
If you are having trouble with a print server on a TCP/IP network, do the following steps in the
order shown before you call the Customer Support Center.
www.lexmark.com
Lexmark E320/E322 Printer