Download Freescale Semiconductor MCF5480 Computer Hardware User Manual
Transcript
XLB Arbiter Registers—MBAR + 0x1F00 16 17 18 19 20 21 22 R 23 24 25 26 27 28 29 30 31 lsb 1 1 1 1 1 1 1 ADRTO[16:31] W RESET: 1 1 Bit Name 0:3 — 4:31 ADRTO 16.2.8 1 1 1 1 1 1 1 Description Reserved Address Tenure Time-out. Contains the upper 28 bits of the Address Time-out Counter. Values represent increments of 16. Default value is 0xFFFFFFF. Arbiter Data Tenure Time-Out Register (R/W)—MBAR + 0x1F5C The Arbiter Data Tenure Time-out Register provides an expiration value to the arbiter watchdog for data tenures. After a data tenure is initiated with a DBB signal assertion by the master, the data tenure watchdog starts counting until either TA is asserted, or the counter expires. If expiration occurs before TA is encountered, the arbiter issues a TEA assertion for the data tenure. Subsequently, the Arbiter Status Register, bit 30 (DT) is set, and an interrupt is generated if the Arbiter Interrupt Enable Register, bit 30 (DTE) is set. The Arbiter Data Tenure watchdog can be enabled/disabled via the Arbiter Configuration Register, bit 29 (AT). Table 16-8. Arbiter Data Tenure Time-Out Register msb 0 1 R 2 3 4 5 6 7 8 9 Rsvd 10 11 12 13 14 15 DATTO[4:15] W RESET: 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 lsb 1 1 1 1 1 1 1 R DATTO[16:31] W RESET: 1 1 Bit Name 0:3 — 4:31 DATTO 16.2.9 1 1 1 1 1 1 1 Description Reserved Data Tenure Time-out. Contains the upper 28 bits of the DataTime-out Counter. Values represent increments of 16. Default value is 0xFFFFFFF. Arbiter Bus Activity Time-Out Register (R/W)—MBAR + 0x1F60 The Arbiter Bus Activity Time-out Register provides an expiration value to the arbiter watchdog for bus activity. The watchdog monitors bus activity, after the counter expires due to excessive bus idle time, the Arbiter Status Register, bit 29 (BA) is set, and an interrupt is generated if the Arbiter Interrupt Enable Register, bit 29 (BAE) is set. The Arbiter Bus Activity watchdog can be enabled/disabled via the Arbiter Configuration Register, bit 28 (BA). Table 16-9. Arbiter Bus Activity Time-Out Register msb 0 1 2 3 4 5 6 R 7 8 9 10 11 12 13 14 15 1 1 1 1 1 1 1 BUSTO[0:15] W RESET: 1 1 1 1 1 1 1 1 1 MPC5200B Users Guide, Rev. 1 Freescale Semiconductor 16-9
Related documents