Download Actron 9640A Scanner User Manual

Chrysler Diagnostics
If Manual Trigger is selected, the scan
tool initializes by recording the first five
frames. When done, press ENTER.
**Ready To Record**
Press ENTER Anytime
To Start Recording.
Stops Automatically ~
Press the BACK key twice to return to
the Chrysler Functions menu.
Waiting For Trouble
Code To Trigger The
Start of Recording
BACK To Exit
~
The scan tool recording time varies. A
recording consists of 5 frames of data
prior to the trigger and several frames
after the trigger. The amount of PIDs
recorded determine the number of
frames.
**Recording Data*
FRAME: 14 of 29
Press ENTER to Stop ~
If Trigger On Codes was selected, then
the scan tool triggers when a DTC is
stored in the vehicle.
After a recording, the Scan Tool displays a prompt to playback the recording. Answer NO to return to the
Chrysler Functions menu.
Playback Data?
<YES>
NO
~
Answer YES to display recorded data.
SWITCH TEST
The Switch Test is used to test the operation of switches on various Chrysler
vehicle systems. These systems may include cruise control, A/C, braking, and
the shift lever position.
7
✓
Because of differences in vehicle designs, the Switch Test may not test
the same switches in every car.
Select Switch Test and press ENTER .
✓
Chrysler Functions
` 6)Switch Test
7)Actuator Test
8)Idle Speed Test
|
]
[
~
Switches for the Engine and Transmission are combined into one list when
applicable.
Select a switch to be tested from the list
and press ENTER.
Select SW To Test |
` A/C CLCH REL
ASD RELAY
[
ASD VOLTS SENS ~
7–6 ••••••••••••••••••••••••••••••••••••••••••••••••••••••••