Download ClearOne MAX EX Specifications
Transcript
<sip_password> The password with which the phone will authenticate with the SIP proxy if <use_sipauth> is enabled and <sip_username> is defined. (See Configuraton: SIP Configuration Screen on page 14 for information on how to set this parameter through the web portal.) Default value: none Allowable string length: 14 <sip_proxy_enable> Enable SIP proxy registration. (See Configuraton: SIP Configuration Screen on page 14 for information on how to set this parameter through the web portal.) Default value: 0 Allowable range: 0 - disable 1 - enable <sip_proxy_server> SIP proxy server to register with when <sip_proxy_enable> is enabled. This parameter can be an IP address, a hostname, or FQDN. (See Configuraton: SIP Configuration Screen on page 14 for information on how to set this parameter through the web portal.) Default value: 0.0.0.0 Allowable string length: 79 <sip_proxy_port> The default port with which to communicate to the SIP proxy. (See Configuraton: SIP Configuration Screen on page 14 for information on how to set this parameter through the web portal.) Default value: 5060 Allowable port range: 1 - 65535 <outbound_sip_proxy_enable> Enable call routing through outbound SIP proxy. (See Configuraton: SIP Configuration Screen on page 14 for information on how to set this parameter through the web portal.) Default value: 0 Allowable range: 0 - disable 1 - enable <outbound_sip_proxy> Outbound SIP proxy address. This can be a valid IP address, a hostname, or FQDN. (See Configuraton: SIP Configuration Screen on page 14 for information on how to set this parameter through the web portal.) Default value: 0.0.0.0 Allowable string length: 79 Chapter 2: Getting Started 25