Download Draper SC1 Programming instructions

Battery Wands
Battery Wands are the power source for battery motors. Wands do come with every motor purchased. Replacement wands can be purchased if needed. Draper only uses the 12V double battery wand or reloadable wand.
Battery life is highly variable depending on the shades size and number of operations that one runs. Typically, the life is 1 to 3 years. Another
thing other than shade size and operation which may reduce battery life is RF interface.
If a battery motor is reading RF interface from an item, then it will stay on and drain battery power much faster. There is no way of knowing if
there is interface draining the motor until it happens. Also conditions can change over time depending on whom or what is the source of the RF
interface.
Reloadable wands will use 8 AA batteries to obtain the 12V needed to run the shade.
Battery Motors will run at different speeds depending on size of shade and type of battery supplying power.
Mounting battery wands can be done with the clips that are sent with the motors. There are 2 wands to mount when install 12V batteries and
just one to mount when installing reloadable wands.
Battery Wand Size—12V Battery—1 Battery size
16" long x 11/16" diameter
Reloadable Wand Size
18" long x 11/16" diameter (screw on cap is ¾" diameter)
®
Page 21 of 120