Download SEH mySND-120 User manual

Appendix - Parameter List
Table 20: Parameter List - Description
Parameters
Value
Default
Description
sys_name
[Host name]
max. 64 characters
[a-z, A-Z, 0-9]
[blank]
Defines the host name of the
SND Server.
sys_descr
[Description]
max. 64 characters
[a-z, A-Z, 0-9]
[blank]
Freely definable description
(of the SND Server).
sys_contact
[Contact person]
max. 64 characters
[a-z, A-Z, 0-9]
[blank]
Freely definable description
(of the contact person).
Table 21: Parameter List - Date/Time
Parameters
Value
Default
Description
ntp
[Date/Time]
on/off
on
Enables/disables the use of a
time server (SNTP).
ntp_server
[Time server]
max. 64 characters
[., a-z, A-Z, 0-9]
pool.ntp.
org
Defines a time server via the
IP address or the host name.
The host name can only be
used if a DNS server was
configured beforehand.
ntp_tzone
[Time zone]
UTC, GMT, EST,
EDT, CST, CDT,
MST, MDT, PST,
PDT, etc.
CET/CE
ST (EU)
The time zone is used to
equalize the difference
between the time received
over the time server and the
local time, including
country-specific particularities
such as Daylight Saving Time.
Table 22: Parameter List - Notification
mySND User Manual
Parameters
Value
Default
Description
mailto_1
mailto_2
[Email address]
valid email address
[max. 64 characters]
[blank]
Defines the email address of
the recipient for notifications.
noti_dev_1
noti_dev_2
[medium connected/disconnected]
on/off
off
Enables/disables the sending
of emails after a removable
medium was connected to or
disconnected from the SND
server.
109