Download CONTROLLER MANUAL SPINCHILLER C.D.A - mark-off

LIST OF ALARMS
CENTRAL MODULE ALARMS
Code displayed
E001 H2O IN temp. probe fault on
control module
E002 H2O OUT temp. probe fault on
control module
E003 Outside air temp. probe fault
Reset
Automatic
Description-actions
Disable load compensation and freecooling
Automatic
Total shut-down – pump on
Automatic
E004 Water Reset input fault
E005 Outside RH% probe fault
E006 Thermal cut-out alarm pump 1 on
control module
E007 Thermal cut-out alarm pump 2 on
control module
E008 Flow switch alarm on control
module
E009 System pressure alarm
E010 Phase monitor alarm
Automatic
Automatic
Automatic
Inhibit associated functions (freecooling –
set point compensation - defrost count
times)
Inhibit WR compensation
Inhibit associated functions
See pump management
Automatic
See pump management
See pump
management
Manual
Automatic
Total shut-down - see pump management
E011 Antifreeze alarm on control
module
E012 Antifreeze pre-alarm on control
module
E013 Change pump on CONTROL
MODULE
E014 Unit configuration alarm
E015 Demand Limit input fault
E016 Main can net disconnectedness
Manual
Total shut-down - see pump management
Total shut-down - Pump Off after suitable
interval
Total shut-down - Pump on
Automatic (*)
Disable steps
Automatic (*)
Signal
Automatic (*)
Automatic (*)
Automatic (*)
Signal
Signal
Total shut-down
Data creazione 10/09/03
DS03I009GB--00
Pagina 42 di 59