Download AirLiner WS100 User`s guide

6. Click OK.
The SMART Board Settings dialog box closes.
7. Close the SMART Board software control panel.
Printing and Customizing Underlays
An underlay is a sheet of paper between the AirLiner slate’s workspace and its transparent
overlay. A tool strip (adjacent) is a toolbar located on the underlay. You can press the icons on the
tool strip to select creative tools and start programs.
You can customize underlays and their tool strips, and you can also print templay underlays.
To print a template underlay
1. Start the SMART Board software control panel:
–
Windows operating systems: Click the SMART Board icon
notification area, and then select Control Panel.
–
Mac operating system software: Press and hold the Control key and click the SMART
Board Tools icon
–
in your computer’s
in the Dock, and then select Open Control Panel.
Linux operating systems: Select Applications > SMART Board Software > Control
Panel.
2. Click SMART Board Settings.
The SMART Board Settings dialog box appears.
3. Click your AirLiner slate in the Select a SMART product area.
A blue border appears around your AirLiner slate.
46
Customizing the Slate
99-00666-20 B0