Download Wincor Nixdorf BEETLE/20 Technical data

BEETLE
/mini-K
Operating Manual
The reproduction, transmission or use of this document or its contents is not
permitted without express authority.
Offenders will be liable for damages.
All rights, including rights created by patent grant or registration of a utility model
or design, are reserved.
Delivery subject to availability; technical modifications possible.
Copyright© Wincor Nixdorf International GmbH, 2010
BEETLE /mini-K
Operating Manual
Edition Aug 2010
Contents
Contents
MANUFACTURERS CERTIFICATION AND NOTES ......................................1
TESTED SAFETY .............................................................................................. 1
BSMI (EMC FOR TAIWAN)...............................................................................1
IMPORTANT NOTES ..........................................................................................2
POWER CORD SELECTION ...............................................................................3
REPLACING THE LITHIUM BATTERY ...................................................................4
INTRODUCTION .............................................................................................. 6
ABOUT THIS MANUAL........................................................................................6
CARE OF THE BEETLE /MINI-K ........................................................................7
RECYCLING THE BEETLE /MINI-K ....................................................................7
WARRANTY .....................................................................................................8
DEVICE OVERVIEW ........................................................................................9
FRONT VIEW....................................................................................................9
BASIC OPERATION ...................................................................................... 10
BEFORE SWITCHING ON THE SYSTEM .............................................................. 10
Unpacking and checking the System ...................................................... 10
Setting up the device ............................................................................... 10
Cabling of the BEETLE /mini-K ............................................................... 11
Connecting to the Main Power Supply .................................................... 11
SWITCHING ON THE SYSTEM ...........................................................................11
BEETLE /MINI-K – THE COMPONENTS ...................................................... 12
FUNCTIONS & INDICATORS ON THE BEETLE /MINI-K .......................................12
 – ON/OFF Button ............................................................................... 12
 – POWER-ON Indicator (LED)........................................................... 12
 – HARD-DISK DRIVE Indicator (LED) ............................................... 12
 – USB Connector ............................................................................... 13
REAR PANEL CONNECTORS ON THE BEETLE /MINI-K......................................14
DC 12V (Power Output Port) ...................................................................15
Expansion Slots....................................................................................... 16
BEETLE /mini-K – Operating Manual
01750201097 A
Contents
Power Supply Unit ................................................................................... 16
VGA Connector for Monitor or LCD-Display ............................................17
Keyboard Connector (PS/2) ....................................................................17
Mouse Connector (PS/2) .........................................................................17
Parallel Interface LPT1 for Modular Printer ............................................. 17
Four COM ports for Standard PC Peripherals.........................................17
LAN (RJ45) Socket for Network .............................................................. 18
USB (Universal Serial Bus) Port 1 and 2 ................................................. 18
Audio Port Sockets .................................................................................. 18
HOW TO SLIDE OPEN THE TOP COVER OF THE CASE..........................................19
SYSTEM CONFIGURATION ............................................................................... 19
MOTHERBOARD CONNECTORS........................................................................20
Motherboard connectors (Rev. 3) ............................................................ 20
Motherboard connectors (Rev. 4) ............................................................ 21
Motherboard Details ................................................................................ 22
SYSTEM BIOS ............................................................................................... 24
SETUP ITEMS ................................................................................................ 25
APPENDIX .....................................................................................................27
TECHNICAL DATA FOR THE BEETLE /MINI-K ................................................... 27
01750201097 A
BEETLE /mini-K – Operating Manual
Manufacturers Certification and notes
Manufacturers Certification and notes
The device complies with the requirements of the EEC
directive 2004/108/EC with regard to ‘Electromagnetic
compatibility" and 2006/95/EC “Low Voltage Directive”.
Therefore, you will find the CE mark on the device or
packaging.
Tested Safety
In addition, the device has received the UL symbol and
cUL symbol.
BSMI (EMC for Taiwan)
The device complies with the requirements of the BSMI
(Bureau of Standards, Metrology and Inspection, Ministry of
Economic Affairs) directive CNS14348 with regard to
“Electromagnetic compatibility” with the limits for a Class B
product.
1
BEETLE /mini-K – Operating Manual
01750201097 A
Notes
Important notes
The BEETLE /mini-K conforms to the current safety standards for data
processing equipment.
2

If this device is taken from a cold environment into the operating room,
moisture condensation may form. The device must be absolutely dry before
being put into service; an acclimatization period of at least two hours must
therefore be observed.

This device is equipped with a safety-tested power cable and may be
connected only to a prescribed grounded-contact power socket.

When setting up the device, ensure that the power socket on the device
and the grounded-contact power socket are easily accessible.

To disconnect the device from the supply voltage completely, switch off the
device and disconnect the power plug.

Ensure that no foreign objects (e.g. office clips) find their way into the
device, as this may lead to electric shocks or short-circuits.

Never plug in or unplug data communication lines during thunderstorms.

Protect devices from vibrations, dust, moisture and heat.

Always dispose of used parts, such as batteries, in an environmentally safe
manner.

The lithium battery must be disposed of in accordance with local regulations
for special waste.

In emergencies (e.g. damaged housing or damaged power cable,
penetration by liquids or foreign bodies), the device must be switched off
immediately, the power plug disconnected and the Customer Service of
Wincor Nixdorf (WN) or your dealer must be notified.

The device may only be repaired by authorized qualified personnel.
Unauthorized opening of the device and inexpertly carried-out repairs may
not only seriously jeopardize the safety of the user, but also cancel all
warranty and liability agreements.
BEETLE /mini-K – Operating Manual
01750201097 A
Manufacturers Certification and notes
Power Cord Selection
If power cord is not provided with the display, user has to ensure that a
certified power cord is used as required by the Safety Regulation of the
country.
Countries
Safety Approvals
USA
UL
Canada
CSA
Germany
VDE
Japan
PSE
Taiwan
BSMI
China
CCC
For other countries not mentioned in the above list, please check with
the local authority.
3
BEETLE /mini-K – Operating Manual
01750201097 A
Notes
Replacing the Lithium Battery
!
CAUTION
Incorrect replacement of the Lithium Battery may lead to a risk of explosion
The end user must replace the lithium battery only by identical batteries or types
recommended by Wincor Nixdorf.
Do not throw Lithium Batteries into the trash can. It must be disposed of in
accordance with local regulations concerning special waste.


! WARNING
Always make sure that the system is switched off before you replace the
battery.
01750201097 A
BEETLE /mini-K – Operating Manual
4
Manufacturers Certification and notes
Push the spring latch
 and remove the Lithium Battery from its Socket 
Insert and press a new Lithium Battery of same type in the Socket.
Make sure that you insert the Battery the right way round.
5
BEETLE /mini-K – Operating Manual
01750201097 A
Introduction
Introduction
About this manual
This manual describes the BEETLE /mini-K system.
This documentation is intended to help you to work with the system and to
serve as a reference work. The detailed table of contents helps you find the
desired information quickly and easily.
NOTE

!
Notes call attention to important information.
CAUTION
Cautions are included to help you avoid damaging
hardware or losing data.
! WARNING
Warnings indicate conditions that, if not observed, can
cause personal injury.
The type and scope of application programs depend on the customer’s own
selection; therefore, software will not be discussed further in this manual.
Separate manuals are included in the scope of the connectable peripherals.
For this reason, a more detailed description of these devices will not be
provided here. For more information see the relevant manuals.
01750201097 A
BEETLE /mini-K – Operating Manual
6
Introduction
Care of the BEETLE /mini-K
! WARNING
Clean your BEETLE /mini-K at regular intervals with a suitable plastic-surface
cleaner. Make sure that the power plug is disconnected, connector cables are
unplugged and that no liquid finds its way into the device. The glass surface of
your Touch Screen should be cleaned with a mild, commercially available
glass cleaning product. All pH neutral materials (pH 6 to 8) are to be used for
cleaning purposes.
Recycling the BEETLE /mini-K
Environmental protection does not begin when time comes to
dispose of the BEETLE /mini-K; it begins with the manufacturer.
This product was designed according to our internal norm
“Environmental conscious product design and development”
The BEETLE /mini-K System is manufactured without the use of CFCs and
CCHS and is produced mainly from reusable components and materials.
The processed plastics can, for the most part, be recycled. Even the precious
metals can be recovered, thus saving energy and costly raw materials.
Please do not stick labels onto plastic case parts. This would help us to re-use
components and material.
You can protect our environment by switching on your equipment only when it
is actually needed. If possible, even avoid the stand-by-mode as this wastes
energy, too. Also switch your equipment off when you take a longer break or
finish your work.
There are still some parts that are not reusable. Wincor Nixdorf guarantees
the environmentally safe disposal of these parts in a Recycling Center, which
is certified pursuant to ISO 9001.
7
BEETLE /mini-K – Operating Manual
01750201097 A
Introduction
So don’t simply throw your BEETLE /mini-K system on the scrap heap when it
has served its time, but take advantage of the environmentally smart, up-todate recycling methods!
Please contact your competent branch office for information on how to return
and re-use devices and disposable materials.
Wincor Nixdorf is always ready to answer any questions you may have about
our environmental protection policies. We look forward to your message.
Warranty
Wincor Nixdorf guarantees a limited warranty engagement for 12 months
beginning with the date of delivery. This warranty engagement covers all those
damages which occur despite a normal use of the product.
Damages because of

improper or insufficient maintenance,

improper use of the product or unauthorized modifications of the product,

inadequate location or surroundings
will not be covered by the warranty.
All parts of the product which are subject to wear and tear are not included in
the warranty engagement.
Please order spare parts at the Wincor Nixdorf customer service.
01750201097 A
BEETLE /mini-K – Operating Manual
8
Device Overview
Device Overview
BEETLE /mini-K is a compact system that features the Open Architecture
design concept with high level of retail peripheral integration.
Front view
9
BEETLE /mini-K – Operating Manual
01750201097 A
Basic Operation
Basic Operation
Before switching on the System
Unpacking and checking the System
Unpack the parts and check to see whether the delivery matches the
information on the delivery note.
If damage has occurred during shipping or if the package contents do not
match the delivery note, promptly inform your Wincor Nixdorf sales outlet.
NOTE

Transport the device only in its original packaging (to protect it against impact
and shock).
Setting up the device
Set up the BEETLE /mini-K system where it will not be exposed to extreme
environ-mental conditions. Protect the device from vibrations, dust, moisture,
heat and strong magnetic fields.
!
CAUTION
Make sure that the side ventilation slots on the BEETLE /mini-K system are
not obstructed in order to ensure that the device has sufficient ventilation.
01750201097 A
BEETLE /mini-K – Operating Manual
10
Basic Operation
Cabling of the BEETLE /mini-K
Follow the steps below in the order given when installing devices:

The cable cover must be removed, if present.

Plug one end of the power cable into the socket of the BEETLE /mini-K.

Plug in and secure the data cable.

Plug the other end of the power cable into the main power supply.
! WARNING
Always make sure that the system is switched off when you do cabling works.
Connecting to the Main Power Supply
All devices belonging to the BEETLE /mini-K system that have a separate
power cable must be connected to the same electric circuit.
 Make sure that all data cables on the system unit and peripherals are
connected correctly.
 Plug the power cables belonging to the BEETLE /mini-K and the
peripherals into the grounded-contact power sockets.
Switching on the system
To switch on the BEETLE /mini-K system,
 Push the ON button at the front of the box.
11
BEETLE /mini-K – Operating Manual
01750201097 A
Components
BEETLE /mini-K – The Components
Functions & Indicators on the BEETLE /mini-K
The illustration below shows the possible components of the BEETLE /mini-K
system.




 – ON/OFF Button
In an Micro ATX based system, the new soft touch power button replaces the
main power switch that turns your system on and off. From an OFF state, you
can switch the system ON by simply pressing the power button. From an ON
state, pressing and holding the power button for four (4) seconds can turn
OFF the system. The functions of the power button can also be altered in the
Power Management section of the CMOS setup.
 – POWER-ON Indicator (LED)
The indicator (LED) lights up Green when the system unit is switched on.
 – HARD-DISK DRIVE Indicator (LED)
The indicator (LED) lights up Amber when the system unit is switched on.
01750201097 A
BEETLE /mini-K – Operating Manual
12
Components
 – USB Connector
The 2 contact points are meant for connection of Universal Serial Bus
(USB) devices.
Drives on the BEETLE /mini-K
The BEETLE /mini-K is equipped with a 2 ½” Hard-Disk drive. The storage
capacity is changed in line with market demand, but is currently at least 160
GB.
There is no floppy-Disk drive or CD-ROM Drive in the system.
13
BEETLE /mini-K – Operating Manual
01750201097 A
Components
Rear Panel Connectors on the BEETLE /mini-K
The illustration below shows the rear panel of the BEETLE /mini-K with the
position of the connecting sockets and connectors.
2X Rear USB
COM2*, COM3*, COM4*
Main Switch
DSUB openings (for
future options)
12V Output
DC Jack
AC Inlet
COM1
PCIe Slot
Audio
Port
VGA
LAN
PS/2 MS
PS/2 KB
01750201097 A
USB1
USB2
BEETLE /mini-K – Operating Manual
USB3
USB4
14
Components
DC 12V (Power Output Port)
Appropriate LCD monitors can be connected via the low voltage jack 12V,
max. 3A via non-LPS. A connecting cable with a DC plug is required for this.
!
WARNING
Connect only cables to the 12V connector which are marked with DP-1
or DP-2.
Do connect the DC plug when the system is turned on, this can lead to
an automatically reboot of the system.
Approved LCD Monitor List:
The following are the approved LCD monitors that are allowed to be
connected to the BEETLE /mini’s 12V Powered Output port:
15
Model
Manufacturer
1
BA72R, BA72R /n,
BA72R /cTouch, BA72R /rTouch
Wincor Nixdorf
2
BA72R-2, BA72R-2 /n,
BA72R-2 /cTouch, BA72R-2 /rTouch
Wincor Nixdorf
3
BA72R-3, BA72R-3 /n,
BA72R-3 /cTouch, BA72R-3 /rTouch
Wincor Nixdorf
4
BA73R-1, BA73R-1 /n,
BA73R-1 /cTouch, BA73R-1 /rTouch
Wincor Nixdorf
5
BA73R-2, BA73R-2 /n,
BA73R-2 /cTouch, BA73R-2 /rTouch
Wincor Nixdorf
6
BA73R-3, BA73R-3 /n,
BA73R-3 /cTouch, BA73R-3 /rTouch
Wincor Nixdorf
7
KTC 5005
KTC
BEETLE /mini-K – Operating Manual
01750201097 A
Components
Or alternately, the connecting LCD monitor includes its enclosure as fire
hazard protection must be certified to relevant safety standards if it is not in
the above approved list.
!
WARNING
Connecting LCD monitor that is not in the above approved list to the
12V Powered Output port may cause safety hazard and also
endanger the user and nearby people. Please consult Wincor Nixdorf if
in doubt.
Expansion Slots
There is one PCI Bus Master slot (rev. 2.2) on-board.
Power Supply Unit
The power supply unit automatically adjusts itself to the particular voltage.
The power output of the power supply unit is maximum 220W.
01750201097 A
BEETLE /mini-K – Operating Manual
16
Components
VGA Connector for Monitor or LCD-Display
You can connect a Monitor or LCD-Display to the BEETLE /MINI via the Blue
15-Pin D-Sub Jack on the VGA Connector.
Keyboard Connector (PS/2)
The BEETLE /mini-K has a Purple 6-pin Mini-DIN Jack for connecting a
keyboard.
NOTE

Make sure that the connector is plugged firmly into the socket to prevent
malfunctioning.
Mouse Connector (PS/2)
The BEETLE /mini-K has a Light-Green 6-pin Mini-DIN Jack for
connecting a Standard Mouse using a PS/2 plug.
Parallel Interface LPT1 for Modular Printer
The BEETLE /mini-K standard Burgundy Parallel Interface LPT1 is
intended for connecting a printer.
Four COM ports for Standard PC Peripherals
You can connect supplementary standard peripherals to the BEETLE
/mini-K Via COM1 (Turquoise)/ COM2 (black)/ COM3 (black)/ COM4
(black).
17
BEETLE /mini-K – Operating Manual
01750201097 A
Components
! WARNING
Make sure that all supplementary devices have been tested for RFI suppression
pursuant to the legal requirements of your country.
LAN (RJ45) Socket for Network
The BEETLE /mini-K system can be connected to a network (LAN) from the
POS terminal rear panel.
USB (Universal Serial Bus) Port 1 and 2
Two USB ports are available at the rear panel of BEETLE /mini-K system for
connecting USB Devices.
Audio Port Sockets
The BEETLE /mini-K has a Lime Line-out socket can be connected to
Headphones or preferably Powered Speakers.
A Light-Blue Line-in socket allows Tape-Players or other Audio Sources to be
records by your POS system or played through the Lime Line-out.
A Pink MIC socket allows microphones to be connected for inputting voice.
01750201097 A
BEETLE /mini-K – Operating Manual
18
Components
How to slide open the top cover of the case
Please see the picture as below:
System configuration
Please see the picture as below:
19
BEETLE /mini-K – Operating Manual
01750201097 A
Motherboard
Motherboard connectors
Motherboard connectors (Rev. 3)
01750201097 A
BEETLE /mini-K – Operating Manual
20
Motherboard
Motherboard connectors (Rev. 4)
21
BEETLE /mini-K – Operating Manual
01750201097 A
Motherboard
Motherboard Details
Processor
Chipset
System Memory Support
Internal VGA
Expansion Slots
Onboard IDE
Onboard LAN
Onboard Audio
Onboard I/O Connectors
01750201097 A
Intel Desktop Processor, LGA775

E7400 Core2Duo 2.8GHz

E5300 Pentium dual core 2.6GHz

E1500 Celeron dual core 2.2GHz
Intel G41, ICH7
800/1067/1333 MT/s (200/266/333 MHz)
FSB
Maximum 4GB on 1x DIMM socket

DDR3 SDRAM, 1066/800MHz

Support 1 GB / 2 GB / 4 GB RAM
modules

Support 1Gb, 512Mb DDR3
technologies for x8 and x16
devices.

Single-channel
Integrated Intel GMA950 graphics card.
PCI Express 1.0a

x4 PCIe Riser slot that carries 3
PCI Express root ports

Support single-lane PCIe add-on
card
2x SATA
PCI Express Ethernet controller
10/100/1000 Mb
ALC662 HD audio Codec
 1x PCIe x4 slot (for 1-lane PCIe add-on
card only)
 2x SATA connector
 2x USB header, 2 x 5 pin header,
2.54mm pitch
 (used for 2x Front USB & 2x Rear
USB)
 1x Wake-on-LAN
 3x Fan connector supporting fan speed
BEETLE /mini-K – Operating Manual
22
Motherboard
System Monitoring
& Management
control thru PWM, 1 x 4 pins
1x Front Panel Interface (incl PC
Speaker)
 1x SMBUS
 1x SDVO/DVI header
 1x Parallel port header
 3x COM port header (used for
COM2,3,4)
 1x Keyboard, PS/2
 1x Mouse, PS/2
 1x VGA
 4x USB (on-board)
 2x USB (via cable)
 1x Ethernet (LAN)
 1x Standard Serial, COM1 (on-board)
 1x MIC/Line In, Line/Speaker Out
 3x powered Serial, COM2,3,4 (via
cables)
Stand PC BIOS with extentions to support
the defined hardware
CPU temperature monitoring
System voltage monitoring
Dimension
6.69''x6.69''

Back Panel Connectors
BIOS
23
BEETLE /mini-K – Operating Manual
01750201097 A
System BIOS
System BIOS
This section describes Award BIOS™ Setup program built into the ROM BIOS.
The Setup program allows users to modify the basic system configuration. This
special information is then stored in battery-backed RAM so that it retains the
Setup information when the power is turned off.
The BIOS reads the system information contained in the CMOS and begins the
process of checking out the system and configuring it. When it finishes, the
BIOS will seek an operating system on one of the disks and then launch and turn
control over to the operating system.
The Setup program can be activated by pressing the <Del> key when the
following message appears briefly at the bottom of the screen during the POST
(Power On Self-Test).
Press DEL to enter SETUP.
Below is the menu displayed on entering the Setup program.
Phoenix – AwardBIOS CMOS Setup Utility
> Standard CMOS Features
> Advanced BIOS Features
> Advanced Chipset Features
> Integrated Peripherals
> Security Chip Configuration
> Power Management Setup
> PnP PCI Configurations
> PC Health Status
01750201097 A
> Frequency/Voltage Control
DMI Information
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
↑ ↓ → ← : Select Line
ESC
: Quit
F10
: Save & Exit Setup
BEETLE /mini-K – Operating Manual
24
System BIOS
Setup Items
The main menu includes the following main setup categories.
Standard CMOS
Features
Use this menu for basic system configuration.
Advanced BIOS
Features
Use this menu to set the Advanced Features
available on your system.
Advanced Chipset
Features
Integrated
Peripherals
Use this menu to specify your settings for
integrated peripherals.
Power Management
Setup
Use this menu to specify your settings for power
management.
PnP / PCI
Configurations
This entry appears if your system supports PnP /
PCI.
PC Health Status
Frequency/Voltage
Control
DMI Information
Load Fail-Safe
Defaults
25
Use this menu to change the values in the chipset
registers and optimize your system’s performance.
Use this menu to enter the hardware monitoring
screen.
Use this menu to specify your settings for
frequency/voltage control.
Use this menu to obtain information related to
BIOS, system, base board.
Use this menu to load the BIOS default values for
the minimal/stable performance for your system to
operate.
BEETLE /mini-K – Operating Manual
01750201097 A
System BIOS
Load Optimized
Defaults
Use this menu to load the BIOS default values that
are factory settings for optimal performance system
operations. While Award has designed the custom
BIOS to maximize performance, the factory has the
right to change these defaults to meet their needs.
Supervisor / User
Password
Use this menu to set User and Supervisor
Passwords.
Save & Exit Setup
Save CMOS value changes to CMOS and exit
setup.
Exit Without Save
Abandon all CMOS value changes and exit setup.
01750201097 A
BEETLE /mini-K – Operating Manual
26
Appendix
Appendix
Technical Data for the BEETLE /mini-K
Dimension (without cable cover)
Width
254 mm
Depth
216 mm
Height
128 mm
Weight
approx. 3.7 kg
Climatic category
Operating
Transport
Storage
IEC 721-3-3
IEC 721-3-2
IEC 721-3-1
Input voltage
100 - 120 VAC
200 - 240 VAC
Max. power consumption
3A
1.5A
Frequency of system voltage
60Hz
50 Hz
27
Class 3K3
Class 2K2
Class 1K2
BEETLE /mini-K – Operating Manual
+5°C to +40°C
-25°C to +60°C
+5°C to +40°C
01750201097 A
Published by
Wincor Nixdorf Pte Ltd
2, Kallang Sector
Singapore 349277
Part No.: 01750201097 A