Download Siemens RDG400KN Technical data

Transcript
3.10.12 Emergency control (LTE Mode only)
In case of smoke or fire the damper can be overridden via KNX.
The necessary information is provided by the function block “HVAC Emergency
Mode”
The table below describes the behavior of the controller output.
#
0
1
2
3
4
5
Datapoint value
Normal
EmergPressure
EmergDepressure
EmergPurge
EmergShutdown
EmergFire
Damper
Normal operation
Fully open
Fully closed
Fully open
Fully closed
Fully closed
Emergency signals have highest priority and command the control output
accordingly. Any ongoing function like fan-overrun etc. will be stopped immediately.
The priority is as follows:
1.
2.
3.
4.
Smoke
Fire
Fan overrun
Normal operation
(Emergency 1..4)
(Emergency 5)
(Emergency 0 and el heater fan overrun function is active)
(Emergency 0 and operation by operating mode button)
53 / 78
Siemens
Building Technologies
RDG400KN Basic documentation
Functions
CE1P3192en
20 Jul 2010