Download TKA 9110 UC Coffeemaker Training Program
Transcript
30 Disassembly – Gas burner (2) To remove gas burner: • After noting connections, disconnect wires to all parts, including gas valve, igniter, flame sensor, Hi-limit & NTC. Be careful to not damage igniter. • Remove burner screws, including screws holding burner bracket to base and combustion chamber and screws holding burner to bracket. All screws are T-20 Torx. Disconnecting wires from gas valve Screw Gas valve & burner Removing front burner base screw Removing rear burner base screw All screws T-20 Removing rear burner base screw Burner screws Burner ring screws Gas valve screws LP burner without ring 1st Edition/Revision 4 (1/19/04)