Download Zebra Wireless Print Server User guide

SGD Commands for Wireless Operation
wlan.ip.dhcp.cid_suffix
wlan.ip.dhcp.cid_suffix
Description This printer setting defines the unique suffix to be used as the client identifier
(DHCP option 61) if DHCP is enabled on the wireless print server and
"wlan.ip.dhcp.cid_type" is set to "0" or "2".
Type getvar; setvar
This table identifies the commands for this format:
Commands
Details
getvar
This command instructs the printer to respond with the client identifier
suffix on the wireless print server.
Format:
! U1 getvar "wlan.ip.dhcp.cid_suffix"
setvar
This command instructs the printer to change the client identifier suffix
value on the wireless print server.
Format:
! U1 setvar "wlan.ip.dhcp.cid_suffix" "value"
Values: The maximum length of a value allowed is 60 ASCII characters
when the CID type is ASCII, or 120 hexadecimal values when the CID
type is hexadecimal.
Default Value: ""
Example • This setvar example shows the value set to "printer".
! U1 setvar "wlan.ip.dhcp.cid_suffix" "printer"
What the setvar value is set to is the getvar result. In this example, the getvar result is
"printer".
4/29/08
Wireless User Guide
14143L-005 Rev. A
171