Download Zebra Wireless Print Server User guide

144
SGD Commands for Wireless Operation
ip.netmask
ip.netmask
Description This setting refers to the subnet mask address. This value is ignored if the IP
protocol is not set to permanent.
Type getvar; setvar
This table identifies the commands for this format:
Commands
Details
getvar
This command instructs the printer to respond with subnet mask.
Format: ! U1 getvar "ip.netmask"
setvar
This command instructs the printer to change the subnet mask.
Format: ! U1 setvar "ip.netmask" "value"
Values: Any valid subnet mask.
Default: "255.255.255.0"
Example • This setvar example shows the value set to "255.255.255.0".
! U1 setvar "ip.netmask" "255.255.255.0"
When the setvar value is set to "255.255.255.0", the getvar result is
"255.255.255.0".
14143L-005 Rev. A
Wireless User Guide
4/29/08