Download Zebra Wireless Print Server User guide

SGD Commands for Wireless Operation
wlan.wep.key4
wlan.wep.key4
Description This printer setting refers to the fourth indexed WEP encryption key. The WEP
encryption key is a hexadecimal string value. This key should match the wireless network
WEP encryption key 4.
Type getvar; setvar
This table identifies the commands for this format:
Commands
Details
getvar
This command instructs the printer respond with the encryption key.
Format: ! U1 getvar "wlan.wep.key4"
For protection a single "*" prints.
setvar
This command instructs the printer to set the encryption key.
Format: ! U1 setvar "wlan.wep.key4" "value"
Values:
10 hexadecimal characters for 40-bit encryption
26 hexadecimal characters for 128-bit encryption
Default: All zeros
Example • This setvar example shows the value set to "A1B2C3D4F5".
! U1 setvar "wlan.wep.key4" "A1B2C3D4F5"
When the setvar value is set to "A1B2C3D4F5", the getvar result is "*".
4/29/08
Wireless User Guide
14143L-005 Rev. A
213